[PATCH v3 12/18] arm64: dts: qcom: sc8180x: switch PCIe QMP PHY to new style of bindings
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sun Aug 20 07:20:29 PDT 2023
Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes). While we are at it, rename PHY
nodes to `phy@`.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 148 ++++++++++----------------
1 file changed, 55 insertions(+), 93 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index e058b0cf84c0..1277bca49653 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -1749,23 +1749,28 @@ pcie0: pci at 1c00000 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
status = "disabled";
};
- pcie0_phy: phy-wrapper at 1c06000 {
+ pcie0_phy: phy at 1c06000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
- reg = <0 0x1c06000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+ #clock-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -1774,21 +1779,6 @@ pcie0_phy: phy-wrapper at 1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy at 1c06200 {
- reg = <0 0x1c06200 0 0x170>, /* tx0 */
- <0 0x1c06400 0 0x200>, /* rx0 */
- <0 0x1c06a00 0 0x1f0>, /* pcs */
- <0 0x1c06600 0 0x170>, /* tx1 */
- <0 0x1c06800 0 0x200>, /* rx1 */
- <0 0x1c06e00 0 0xf4>; /* pcs_com */
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- #phy-cells = <0>;
- };
};
pcie3: pci at 1c08000 {
@@ -1856,23 +1846,29 @@ pcie3: pci at 1c08000 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
- phys = <&pcie3_lane>;
+ phys = <&pcie3_phy>;
phy-names = "pciephy";
status = "disabled";
};
- pcie3_phy: phy-wrapper at 1c0c000 {
+ pcie3_phy: phy at 1c0c000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
- reg = <0 0x1c0c000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0c000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_3_CFG_AHB_CLK>,
<&gcc GCC_PCIE_3_CLKREF_CLK>,
- <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_3_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+ #clock-cells = <0>;
+ clock-output-names = "pcie_3_pipe_clk";
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_3_PHY_BCR>;
reset-names = "phy";
@@ -1881,21 +1877,6 @@ pcie3_phy: phy-wrapper at 1c0c000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie3_lane: phy at 1c0c200 {
- reg = <0 0x1c0c200 0 0x170>, /* tx0 */
- <0 0x1c0c400 0 0x200>, /* rx0 */
- <0 0x1c0ca00 0 0x1f0>, /* pcs */
- <0 0x1c0c600 0 0x170>, /* tx1 */
- <0 0x1c0c800 0 0x200>, /* rx1 */
- <0 0x1c0ce00 0 0xf4>; /* pcs_com */
- clocks = <&gcc GCC_PCIE_3_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_3_pipe_clk";
- #phy-cells = <0>;
- };
};
pcie1: pci at 1c10000 {
@@ -1963,23 +1944,29 @@ pcie1: pci at 1c10000 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
status = "disabled";
};
- pcie1_phy: phy-wrapper at 1c16000 {
+ pcie1_phy: phy at 1c16000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
- reg = <0 0x1c16000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c16000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_CLKREF_CLK>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+ #clock-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk";
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -1988,21 +1975,6 @@ pcie1_phy: phy-wrapper at 1c16000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy at 1c0e200 {
- reg = <0 0x1c16200 0 0x170>, /* tx0 */
- <0 0x1c16400 0 0x200>, /* rx0 */
- <0 0x1c16a00 0 0x1f0>, /* pcs */
- <0 0x1c16600 0 0x170>, /* tx1 */
- <0 0x1c16800 0 0x200>, /* rx1 */
- <0 0x1c16e00 0 0xf4>; /* pcs_com */
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
- #clock-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
-
- #phy-cells = <0>;
- };
};
pcie2: pci at 1c18000 {
@@ -2070,23 +2042,29 @@ pcie2: pci at 1c18000 {
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
- phys = <&pcie2_lane>;
+ phys = <&pcie2_phy>;
phy-names = "pciephy";
status = "disabled";
};
- pcie2_phy: phy-wrapper at 1c1c000 {
+ pcie2_phy: phy at 1c1c000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
- reg = <0 0x1c1c000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c1c000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_2_CLKREF_CLK>,
- <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "refgen";
+ <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+ #clock-cells = <0>;
+ clock-output-names = "pcie_3_pipe_clk";
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_2_PHY_BCR>;
reset-names = "phy";
@@ -2095,22 +2073,6 @@ pcie2_phy: phy-wrapper at 1c1c000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie2_lane: phy at 1c0e200 {
- reg = <0 0x1c1c200 0 0x170>, /* tx0 */
- <0 0x1c1c400 0 0x200>, /* rx0 */
- <0 0x1c1ca00 0 0x1f0>, /* pcs */
- <0 0x1c1c600 0 0x170>, /* tx1 */
- <0 0x1c1c800 0 0x200>, /* rx1 */
- <0 0x1c1ce00 0 0xf4>; /* pcs_com */
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
- clock-names = "pipe0";
-
- #clock-cells = <0>;
- clock-output-names = "pcie_2_pipe_clk";
-
- #phy-cells = <0>;
- };
};
ufs_mem_hc: ufshc at 1d84000 {
--
2.39.2
More information about the linux-phy
mailing list