September 2026 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Sep 1 08:25:51 PDT 2026
Ending: Wed Sep 30 16:33:34 PDT 2026
Messages: 470

• [PATCH 1/2] dt-bindings: usb: snps,dwc3: Correctly restrict number of resets   Rob Herring (Arm)
• [PATCH 2/2] dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: Correctly restrict number of resets   Rob Herring (Arm)
• Potential deadlock in clk-pwm   Sean Anderson
• [PATCH] mmc: meson-gx: Convert host->lock to raw spinlock   Sean Anderson
• [PATCH] mmc: meson-gx: Convert host->lock to raw spinlock   Sean Anderson
• [PATCH] arm64: dts: amlogic: meson-s4: Set stdout-path to uart_b   Sean Anderson
• [PATCH 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   Neil Armstrong
• [PATCH v3 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   Neil Armstrong
• [PATCH v2 2/4] mmc: meson-gx: enable the bus pipeline clock on T7   Neil Armstrong
• [PATCH v2 3/4] arm64: dts: amlogic: t7: add the pipeline clock to the MMC controllers   Neil Armstrong
• [PATCH v2 4/4] clk: meson: t7: don't mark sys_ampipe_nand as critical   Neil Armstrong
• [PATCH v3 2/2] arm64: dts: amlogic: a9: Add IR controller support   Neil Armstrong
• [PATCH] drm/meson: fix device_node leak in meson_encoder_dsi_probe()   Neil Armstrong
• [PATCH v2 0/4] amlogic: t7: give the MMC bus pipeline clock real consumers   Neil Armstrong
• (subset) [PATCH v2 0/4] amlogic: t7: give the MMC bus pipeline clock real consumers   Neil Armstrong
• [GIT PULL] amlogic ARM64 DT fixes for v7.3-rc   Neil Armstrong
• [PATCH v12 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   Neil Armstrong
• [PATCH v2 00/12] soc: amlogic: clk-measure: Add support for more SoCs   Neil Armstrong
• [PATCH 2/5] drm/bridge_connector: preserve connector status for IRQ-only HPD events   Dmitry Baryshkov
• [PATCH 1/5] drm/bridge: allow hpd_notify() to suppress connector hotplug events   Dmitry Baryshkov
• [PATCH v5 0/8] drm: handle IRQ_HPD events correctly   Dmitry Baryshkov
• [PATCH v5 1/8] drm/connector: report out-of-band IRQ_HPD events   Dmitry Baryshkov
• [PATCH v5 2/8] drm/connector: pass down IRQ_HPD to the drivers   Dmitry Baryshkov
• [PATCH v5 3/8] drm/bridge: aux-hpd: let drivers pass IRQ_HPD events   Dmitry Baryshkov
• [PATCH v5 4/8] drm/bridge: pass extra events to the HPD callback   Dmitry Baryshkov
• [PATCH v5 5/8] drm/bridge: pass down IRQ_HPD to the drivers   Dmitry Baryshkov
• [PATCH v5 6/8] drm/msm: dp: handle the IRQ_HPD events reported by USB-C   Dmitry Baryshkov
• [PATCH v5 7/8] soc: qcom: pmic-glink-altmode: pass down HPD_IRQ events   Dmitry Baryshkov
• [PATCH v5 8/8] usb: typec: ucsi: huawei-gaokun: pass down HPD_IRQ events   Dmitry Baryshkov
• [PATCH] pmdomain: amlogic: Keep Amlogic A9 ETH domain always on   Martin Blumenstingl
• [PATCH v3 0/4] spi: add support for Amlogic A9   Mark Brown
• [PATCH] spi: amlogic-spisg: check clk_prepare_enable() return value   Mark Brown
• (subset) [PATCH v2 0/3] t7: add some nodes for Amlogc t7.   Mark Brown
• (subset) [PATCH 0/4] arm64: amlogic: t7: describe the VIM4 supplies and keep the fabric clocks running   Jerome Brunet
• [PATCH 4/4] clk: meson: t7: don't mark sys_ampipe_nand as critical   Jerome Brunet
• [PATCH 6.12.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Jerome Brunet
• [PATCH 6.6.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Jerome Brunet
• [PATCH 6.1.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Jerome Brunet
• [PATCH 5.10.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Jerome Brunet
• [PATCH 5.15.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Jerome Brunet
• [PATCH 6.12.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Jerome Brunet
• [PATCH 6.12.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Jerome Brunet
• [PATCH v2 4/4] clk: meson: t7: don't mark sys_ampipe_nand as critical   Jerome Brunet
• [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jerome Brunet
• [PATCH RFC 0/3] clk: meson: Refactor PLL pre-divider as a divider clock   Jerome Brunet
• [PATCH] media: meson: vdec: size capture planes from the aligned canvas   Dan Carpenter
• [RFC PATCH 0/4] PCI: Fix and improve default MPS configuration   Niklas Cassel
• [RFC PATCH 1/4] PCI: Update saved Max Payload Size in pcie_set_mps()   Niklas Cassel
• [RFC PATCH 2/4] PCI: Match the hierarchy's MPS to a device's MPSS as necessary   Niklas Cassel
• [RFC PATCH 3/4] PCI: Configure Root Port MPS after scanning its hierarchy   Niklas Cassel
• [RFC PATCH 4/4] PCI: meson: Remove redundant MPS configuration   Niklas Cassel
• [PATCH v5 1/8] drm/connector: report out-of-band IRQ_HPD events   Chaoyi Chen
• [PATCH v5 2/8] drm/connector: pass down IRQ_HPD to the drivers   Chaoyi Chen
• [PATCH v11 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   Ronald Claveau
• [PATCH v12 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   Ronald Claveau
• [PATCH v12 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   Ronald Claveau
• [PATCH v2 3/3] arm64: dts: amlogic: add T7 peripheral nodes   Ronald Claveau
• [PATCH v3 1/3] dt-bindings: pwm: amlogic: Add core clock for S4 like   Ronald Claveau
• [PATCH v2 1/4] dt-bindings: mmc: amlogic,meson-gx-mmc: document the T7 pipeline clock   Conor Dooley
• [PATCH 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   Conor Dooley
• [PATCH 1/3] dt-bindings: i2c: add Amlogic A9 I2C controller   Conor Dooley
• [PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support   Conor Dooley
• [PATCH v2 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   Conor Dooley
• [PATCH v2 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   Conor Dooley
• [PATCH v3 1/3] dt-bindings: pwm: amlogic: Add core clock for S4 like   Conor Dooley
• [PATCH] staging: media: meson: fix typo in codec files   Nicolas Dufresne
• [PATCH v2] media: meson: vdec: fix use-after-free of in-use frames in codec_vp9_rm_noshow_frame()   Nicolas Dufresne
• [PATCH] media: meson: vdec: size capture planes from the aligned canvas   Michael Freidkin
• [PATCH] media: meson: vdec: size capture planes from the aligned canvas   Michael Freidkin
• [PATCH net-next v14 00/10] net: stmmac: qcom-ethqos: add support for SCMI power domains   Bartosz Golaszewski
• [PATCH net-next v14 01/10] net: phy: aquantia: fix system interface type not updated in forced mode   Bartosz Golaszewski
• [PATCH net-next v14 02/10] dt-bindings: phy: document the serdes PHY on sa8255p   Bartosz Golaszewski
• [PATCH net-next v14 03/10] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems   Bartosz Golaszewski
• [PATCH net-next v14 04/10] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems   Bartosz Golaszewski
• [PATCH net-next v14 05/10] net: stmmac: qcom-ethqos: set serdes mode before powerup   Bartosz Golaszewski
• [PATCH net-next v14 06/10] net: stmmac: qcom-ethqos: update phy_mode to the resolved interface in mac_finish()   Bartosz Golaszewski
• [PATCH net-next v14 07/10] net: stmmac: qcom-ethqos: fix SGMII loopback not set on resume after speed change   Bartosz Golaszewski
• [PATCH net-next v14 08/10] net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data   Bartosz Golaszewski
• [PATCH net-next v14 09/10] net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function   Bartosz Golaszewski
• [PATCH net-next v14 10/10] net: stmmac: qcom-ethqos: add support for sa8255p   Bartosz Golaszewski
• [PATCH net-next v15 0/9] net: stmmac: qcom-ethqos: add support for SCMI power domains   Bartosz Golaszewski
• [PATCH net-next v15 1/9] net: phy: aquantia: fix system interface type not updated in forced mode   Bartosz Golaszewski
• [PATCH net-next v15 2/9] dt-bindings: phy: document the serdes PHY on sa8255p   Bartosz Golaszewski
• [PATCH net-next v15 3/9] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems   Bartosz Golaszewski
• [PATCH net-next v15 4/9] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems   Bartosz Golaszewski
• [PATCH net-next v15 5/9] net: stmmac: qcom-ethqos: set serdes mode before powerup   Bartosz Golaszewski
• [PATCH net-next v15 6/9] net: stmmac: qcom-ethqos: update phy_mode to the resolved interface in mac_finish()   Bartosz Golaszewski
• [PATCH net-next v15 7/9] net: stmmac: qcom-ethqos: reuse the address of ethqos_emac_driver_data   Bartosz Golaszewski
• [PATCH net-next v15 8/9] net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function   Bartosz Golaszewski
• [PATCH net-next v15 9/9] net: stmmac: qcom-ethqos: add support for sa8255p   Bartosz Golaszewski
• [PATCH v9 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v9 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v2 0/3] mmc: Handle errors from optional IRQ lookup   Ulf Hansson
• [PATCH 0/2] mmc: Make sure clk_init_data is fully initialized   Ulf Hansson
• [PATCH v2 0/4] amlogic: t7: give the MMC bus pipeline clock real consumers   Ulf Hansson
• [PATCH] pmdomain: amlogic: Keep Amlogic A9 ETH domain always on   Ulf Hansson
• [PATCH] mmc: meson-gx: Convert host->lock to raw spinlock   Ulf Hansson
• [PATCH] mmc: meson-gx: Convert host->lock to raw spinlock   Ulf Hansson
• [PATCH 1/2] PCI: dwc: Align register macros with Synopsys documentation   Bjorn Helgaas
• [PATCH 1/2] PCI: dwc: Align register macros with Synopsys documentation   Bjorn Helgaas
• [PATCH v2 1/4] dt-bindings: mmc: amlogic,meson-gx-mmc: document the T7 pipeline clock   Rob Herring
• [PATCH] dt-bindings: Expand flow lists to block lists   Rob Herring
• [PATCH 07/10] clk: amlogic: Support POWER_OF_TWO for PLL pre-divider   Jian Hu
• [PATCH RFC 1/3] clk: meson: pll: Remove the dedicated n parameter   Jian Hu
• [PATCH RFC 3/3] clk: meson: t7: Model PLL pre-divider as a divider clock   Jian Hu
• [PATCH v11 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   Lee Jones
• [PATCH v11 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   Lee Jones
• (subset) [PATCH v12 0/6] Add VIM4 MCU/FAN support   Lee Jones
• [PATCH 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   Raspberry Kan
• [PATCH 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   Raspberry Kan
• [PATCH v5 2/3] nvmem: core: deprecate reg_write callback with reg_write_const   Srinivas Kandagatla
• [PATCH net-next v14 01/10] net: phy: aquantia: fix system interface type not updated in forced mode   Jakub Kicinski
• [PATCH net-next v14 00/10] net: stmmac: qcom-ethqos: add support for SCMI power domains   Jakub Kicinski
• [PATCH net-next v14 03/10] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems   Jakub Kicinski
• [PATCH net-next v14 06/10] net: stmmac: qcom-ethqos: update phy_mode to the resolved interface in mac_finish()   Jakub Kicinski
• [PATCH net-next v14 07/10] net: stmmac: qcom-ethqos: fix SGMII loopback not set on resume after speed change   Jakub Kicinski
• [PATCH net-next v15 3/9] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems   Jakub Kicinski
• [PATCH net-next v15 1/9] net: phy: aquantia: fix system interface type not updated in forced mode   Jakub Kicinski
• [PATCH] rtc: fix typos in comments   Joshua Kinard
• [PATCH v4 3/4] pwm: meson: use bulk API for per-channel clocks   Uwe Kleine-König
• [PATCH 2/6] ASoC: meson: add audin main module and I2S formatter   Uwe Kleine-König
• [PATCH v3 1/2] dt-bindings: arm: amlogic: add Xiaomi Mi Box 4   Krzysztof Kozlowski
• [PATCH 01/10] dt-bindings: soc: amlogic: Add compatible to support more SoCs   Krzysztof Kozlowski
• [PATCH 1/6] dt-bindings: sound: amlogic: add schemas for audin components   Krzysztof Kozlowski
• [PATCH 2/6] ASoC: meson: add audin main module and I2S formatter   Krzysztof Kozlowski
• [PATCH 2/6] ASoC: meson: add audin main module and I2S formatter   Krzysztof Kozlowski
• [PATCH v9 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH v9 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: thermal: amlogic: describe bus clock for t7-thermal   Krzysztof Kozlowski
• [PATCH v2 01/12] dt-bindings: soc: amlogic: Reordering compatible of clk-measure   Krzysztof Kozlowski
• [PATCH v2 02/12] dt-bindings: soc: amlogic: Add clk-measure compatible to support more SoCs   Krzysztof Kozlowski
• [PATCH v3 1/7] ASoC: dt-bindings: amlogic,gx-audin: add schema   Krzysztof Kozlowski
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH] tty: serial: meson: fix UART driver lifetime   Greg Kroah-Hartman
• [PATCH 6.12.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Sasha Levin
• [PATCH 6.6.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Sasha Levin
• [PATCH 6.1.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Sasha Levin
• [PATCH 5.15.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Sasha Levin
• [PATCH 5.10.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Sasha Levin
• [PATCH 6.12.y] clk: meson: align gxbb_32k_clk_sel number of parents with actual count   Sasha Levin
• [PATCH v12 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   Daniel Lezcano
• [PATCH] usb: dwc3: meson-g12a: disable VBUS regulator on remove   Guangshuo Li
• [PATCH] drm/meson: Fix next_bridge reference leak in meson_encoder_cvbs_probe()   Wentao Liang
• [PATCH] drm/meson: Fix next_bridge reference leak in meson_encoder_dsi_probe()   Wentao Liang
• [PATCH] drm/meson: Fix platform device reference leak in meson_encoder_hdmi_probe()   Wentao Liang
• [PATCH] drm/meson: Fix remote device node leak in meson_encoder_dsi_probe()   Wentao Liang
• [PATCH 01/10] dt-bindings: soc: amlogic: Add compatible to support more SoCs   Chuan Liu
• [PATCH 03/10] soc: amlogic: clk-measure: Add support for more SoCs   Chuan Liu
• [PATCH v3 1/3] dt-bindings: pwm: amlogic: Add core clock for S4 like   Chuan Liu
• [PATCH v2 4/4] clk: meson: t7: don't mark sys_ampipe_nand as critical   Brian Masney
• [PATCH] dt-bindings: Expand flow lists to block lists   Daniel Matyas
• [PATCH v5 0/3] nvmem: migrate to const void * in reg_write   Link Mauve
• [PATCH v6 0/4] nvmem: migrate to const void * in reg_write   Link Mauve
• [PATCH v6 1/4] firmware: meson: pass a const buffer to meson_sm_call_write()   Link Mauve
• [PATCH v6 2/4] nvmem: core: deprecate reg_write callback with reg_write_const   Link Mauve
• [PATCH v6 3/4] nvmem: make all reg_write callbacks take const void *   Link Mauve
• [PATCH v6 4/4] nvmem: enable COMPILE_TEST for more drivers   Link Mauve
• [PATCH v6 0/4] nvmem: migrate to const void * in reg_write   Link Mauve
• [PATCH v4 2/4] pwm: meson: add the PWM count driver data   Alexandre Mergnat
• [PATCH v4 3/4] pwm: meson: use bulk API for per-channel clocks   Alexandre Mergnat
• [PATCH v4 4/4] pwm: meson: Add support for Amlogic S7   Alexandre Mergnat
• [PATCH 0/5] drm/msm/dp: Add MSM Type-C MST support   Yongxing Mou
• [PATCH 1/5] drm/bridge: allow hpd_notify() to suppress connector hotplug events   Yongxing Mou
• [PATCH] tty: serial: meson: fix UART driver lifetime   Myeonghun Pak
• [PATCH] spi: amlogic-spisg: Balance runtime PM and clock cleanup   Myeonghun Pak
• [PATCH 1/2] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Mohamad Raizudeen
• [PATCH] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Mohamad Raizudeen
• [PATCH 1/2] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Mohamad Raizudeen
• [PATCH v2] crypto/amlogic: Use devm APIs for clock management   Mohamad Raizudeen
• [PATCH v3] crypto/amlogic: Use devm APIs for clock management   Mohamad Raizudeen
• [PATCH v4] crypto/amlogic: Use devm APIs for clock management   Mohamad Raizudeen
• [PATCH v2] crypto/amlogic: Use devm APIs for clock management   Mohamad Raizudeen
• [PATCH] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Mohamad Raizudeen
• [PATCH v2] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Mohamad Raizudeen
• [PATCH v3] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Mohamad Raizudeen
• [PATCH v7 20/23] drm: bridge: dw_hdmi: Rework HDP and RXSENSE interrupt handling   Ian Ray
• [PATCH 00/10] soc: amlogic: clk-measure: Add support for more SoCs   Chuan Liu via B4 Relay
• [PATCH 01/10] dt-bindings: soc: amlogic: Add compatible to support more SoCs   Chuan Liu via B4 Relay
• [PATCH 02/10] soc: amlogic: clk-measure: Support more measurement channels   Chuan Liu via B4 Relay
• [PATCH 03/10] soc: amlogic: clk-measure: Add support for more SoCs   Chuan Liu via B4 Relay
• [PATCH 04/10] soc: amlogic: clk-measure: Optimize CLK_MSR_ID to reduce memory usage   Chuan Liu via B4 Relay
• [PATCH 05/10] arm64: dts: amlogic: a5: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH 06/10] arm64: dts: amlogic: a4: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH 07/10] arm64: dts: amlogic: s7: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH 08/10] arm64: dts: amlogic: s7d: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH 09/10] arm64: dts: amlogic: s6: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH 10/10] arm64: dts: amlogic: a9: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH v2 00/12] soc: amlogic: clk-measure: Add support for more SoCs   Chuan Liu via B4 Relay
• [PATCH v2 01/12] dt-bindings: soc: amlogic: Reordering compatible of clk-measure   Chuan Liu via B4 Relay
• [PATCH v2 02/12] dt-bindings: soc: amlogic: Add clk-measure compatible to support more SoCs   Chuan Liu via B4 Relay
• [PATCH v2 03/12] soc: amlogic: clk-measure: Support more measurement channels   Chuan Liu via B4 Relay
• [PATCH v2 04/12] soc: amlogic: clk-measure: Align compatible entries with DT bindings   Chuan Liu via B4 Relay
• [PATCH v2 05/12] soc: amlogic: clk-measure: Add support for more SoCs   Chuan Liu via B4 Relay
• [PATCH v2 06/12] soc: amlogic: clk-measure: Optimize CLK_MSR_ID to reduce memory usage   Chuan Liu via B4 Relay
• [PATCH v2 07/12] arm64: dts: amlogic: a5: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH v2 08/12] arm64: dts: amlogic: a4: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH v2 09/12] arm64: dts: amlogic: s7: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH v2 10/12] arm64: dts: amlogic: s7d: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH v2 11/12] arm64: dts: amlogic: s6: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH v2 12/12] arm64: dts: amlogic: a9: Add clk-measure controller node   Chuan Liu via B4 Relay
• [PATCH 0/2] arm64: dts: amlogic: meson-sm1-odroid-hc4: fix the SPI NOR   Igor Velkov via B4 Relay
• [PATCH 1/2] arm64: dts: amlogic: meson-sm1-odroid-hc4: mux the SPI NOR HOLD# and WP# pins   Igor Velkov via B4 Relay
• [PATCH 2/2] arm64: dts: amlogic: meson-sm1-odroid-hc4: run the SPI NOR at 40 MHz   Igor Velkov via B4 Relay
• [PATCH RFC 0/3] clk: meson: Refactor PLL pre-divider as a divider clock   Jian Hu via B4 Relay
• [PATCH RFC 1/3] clk: meson: pll: Remove the dedicated n parameter   Jian Hu via B4 Relay
• [PATCH RFC 2/3] dt-bindings: clock: amlogic: Add T7 pre-divider clock IDs   Jian Hu via B4 Relay
• [PATCH RFC 3/3] clk: meson: t7: Model PLL pre-divider as a divider clock   Jian Hu via B4 Relay
• [PATCH] drm/meson: fix device_node leak in meson_encoder_dsi_probe()   Miles Krause via B4 Relay
• [PATCH v10 0/6] Add VIM4 MCU/FAN support   Ronald Claveau via B4 Relay
• [PATCH v10 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   Ronald Claveau via B4 Relay
• [PATCH v10 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   Ronald Claveau via B4 Relay
• [PATCH v10 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   Ronald Claveau via B4 Relay
• [PATCH v10 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   Ronald Claveau via B4 Relay
• [PATCH v10 5/6] arm64: dts: amlogic: t7: Add i2c controller node   Ronald Claveau via B4 Relay
• [PATCH v10 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   Ronald Claveau via B4 Relay
• [PATCH v11 0/6] Add VIM4 MCU/FAN support   Ronald Claveau via B4 Relay
• [PATCH v11 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   Ronald Claveau via B4 Relay
• [PATCH v11 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   Ronald Claveau via B4 Relay
• [PATCH v11 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   Ronald Claveau via B4 Relay
• [PATCH v11 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   Ronald Claveau via B4 Relay
• [PATCH v11 5/6] arm64: dts: amlogic: t7: Add i2c controller node   Ronald Claveau via B4 Relay
• [PATCH v11 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   Ronald Claveau via B4 Relay
• [PATCH v12 0/6] Add VIM4 MCU/FAN support   Ronald Claveau via B4 Relay
• [PATCH v12 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   Ronald Claveau via B4 Relay
• [PATCH v12 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   Ronald Claveau via B4 Relay
• [PATCH v12 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   Ronald Claveau via B4 Relay
• [PATCH v12 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   Ronald Claveau via B4 Relay
• [PATCH v12 5/6] arm64: dts: amlogic: t7: Add i2c controller node   Ronald Claveau via B4 Relay
• [PATCH v12 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   Ronald Claveau via B4 Relay
• [PATCH 0/2] Add bus clock for t7-thermal sensor   Ronald Claveau via B4 Relay
• [PATCH 1/2] dt-bindings: thermal: amlogic: describe bus clock for t7-thermal   Ronald Claveau via B4 Relay
• [PATCH 2/2] thermal/drivers/amlogic: switch to clk_bulk API to support multiple clocks   Ronald Claveau via B4 Relay
• [PATCH v2 0/2] Add bus clock for t7-thermal sensor   Ronald Claveau via B4 Relay
• [PATCH v2 1/2] dt-bindings: thermal: amlogic: describe bus clock for t7-thermal   Ronald Claveau via B4 Relay
• [PATCH v2 2/2] thermal/drivers/amlogic: switch to clk_bulk API to support multiple clocks   Ronald Claveau via B4 Relay
• [PATCH 0/3] Add T7 PWM core clock support   Ronald Claveau via B4 Relay
• [PATCH 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   Ronald Claveau via B4 Relay
• [PATCH 2/3] pwm: meson: Add optional core clock for S4 PWM   Ronald Claveau via B4 Relay
• [PATCH 3/3] arm64: dts: amlogic: t7: Add core clock to PWM controller nodes   Ronald Claveau via B4 Relay
• [PATCH v2 0/3] Add T7 PWM core clock support   Ronald Claveau via B4 Relay
• [PATCH v2 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   Ronald Claveau via B4 Relay
• [PATCH v2 2/3] pwm: meson: Add optional core clock for S4 PWM   Ronald Claveau via B4 Relay
• [PATCH v2 3/3] arm64: dts: amlogic: t7: Add core clock to PWM controller nodes   Ronald Claveau via B4 Relay
• [PATCH v3 0/3] Add T7 PWM core clock support   Ronald Claveau via B4 Relay
• [PATCH v3 1/3] dt-bindings: pwm: amlogic: Add core clock for S4 like   Ronald Claveau via B4 Relay
• [PATCH v3 2/3] pwm: meson: Add optional core clock for S4 PWM   Ronald Claveau via B4 Relay
• [PATCH v3 3/3] arm64: dts: amlogic: a1-c3-s4-t7: Add core clock to PWM controller nodes   Ronald Claveau via B4 Relay
• [PATCH v3 0/2] ir: support IR for Amlogic A9 SoC   Xianwei Zhao via B4 Relay
• [PATCH v3 1/2] dt-bindings: media: meson6-ir: Add Amlogic A9 IR compatible   Xianwei Zhao via B4 Relay
• [PATCH v3 2/2] arm64: dts: amlogic: a9: Add IR controller support   Xianwei Zhao via B4 Relay
• [PATCH v12 0/3] Add Amlogic general DMA   Xianwei Zhao via B4 Relay
• [PATCH v12 1/3] dt-bindings: dma: Add Amlogic A9 SoC DMA   Xianwei Zhao via B4 Relay
• [PATCH v12 2/3] dmaengine: amlogic: Add general DMA driver for A9   Xianwei Zhao via B4 Relay
• [PATCH v12 3/3] MAINTAINERS: Add an entry for Amlogic DMA driver   Xianwei Zhao via B4 Relay
• [PATCH v5 0/2] thermal: Add support A9   Xianwei Zhao via B4 Relay
• [PATCH v5 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Xianwei Zhao via B4 Relay
• [PATCH v5 2/2] thermal: amlogic: Add support for A9 thermal controller   Xianwei Zhao via B4 Relay
• [PATCH] pmdomain: amlogic: Keep Amlogic A9 ETH domain always on   Xianwei Zhao via B4 Relay
• [PATCH 0/3] t7: add some nodes for Amlogc t7.   Xianwei Zhao via B4 Relay
• [PATCH 1/3] spi: dt-bindings: amlogic,meson-gx-spicc: add T7 compatible   Xianwei Zhao via B4 Relay
• [PATCH 2/3] dt-bindings: net: meson-dwmac: add T7 support   Xianwei Zhao via B4 Relay
• [PATCH 3/3] arm64: dts: amlogic: add T7 peripheral nodes   Xianwei Zhao via B4 Relay
• [PATCH v2 0/3] t7: add some nodes for Amlogc t7.   Xianwei Zhao via B4 Relay
• [PATCH v2 1/3] spi: dt-bindings: amlogic,meson-gx-spicc: add T7 compatible   Xianwei Zhao via B4 Relay
• [PATCH v2 2/3] dt-bindings: net: meson-dwmac: add T7 support   Xianwei Zhao via B4 Relay
• [PATCH v2 3/3] arm64: dts: amlogic: add T7 peripheral nodes   Xianwei Zhao via B4 Relay
• [PATCH 0/3] i2c: Add driver support Amlogic A9 I2C   Xianwei Zhao via B4 Relay
• [PATCH 1/3] dt-bindings: i2c: add Amlogic A9 I2C controller   Xianwei Zhao via B4 Relay
• [PATCH 2/3] i2c: amlogic: Add Amlogic A9 I2C controller driver   Xianwei Zhao via B4 Relay
• [PATCH 3/3] MAINTAINERS: Add an entry for Amlogic I2C driver   Xianwei Zhao via B4 Relay
• [PATCH v9 0/6] Add Amlogic stateless H.264 video decoder for S4   Zhentao Guo via B4 Relay
• [PATCH v9 1/6] firmware: meson: sm: video firmware loading via secure monitor   Zhentao Guo via B4 Relay
• [PATCH v9 2/6] firmware: meson: sm: Add video firmware loading SMC call   Zhentao Guo via B4 Relay
• [PATCH v9 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo via B4 Relay
• [PATCH v9 4/6] decoder: Add V4L2 stateless H.264 decoder driver   Zhentao Guo via B4 Relay
• [PATCH v9 5/6] arm64: dts: amlogic: Add video decoder driver support for S4 SOCs   Zhentao Guo via B4 Relay
• [PATCH v9 6/6] arm64: defconfig: Enable CONFIG_VIDEO_AMLOGIC_VDEC   Zhentao Guo via B4 Relay
• [PATCH v10 0/6] Add Amlogic stateless H.264 video decoder for S4   Zhentao Guo via B4 Relay
• [PATCH v10 1/6] firmware: meson: sm: video firmware loading via secure monitor   Zhentao Guo via B4 Relay
• [PATCH v10 2/6] firmware: meson: sm: Add video firmware loading SMC call   Zhentao Guo via B4 Relay
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo via B4 Relay
• [PATCH v10 4/6] decoder: Add V4L2 stateless H.264 decoder driver   Zhentao Guo via B4 Relay
• [PATCH v10 5/6] arm64: dts: amlogic: Add video decoder driver support for S4 SOCs   Zhentao Guo via B4 Relay
• [PATCH v10 6/6] arm64: defconfig: Enable CONFIG_VIDEO_AMLOGIC_VDEC   Zhentao Guo via B4 Relay
• [PATCH 0/2] PCI: dwc: Clean up DWC PCIe register macros   Manivannan Sadhasivam
• [PATCH] rtc: fix typos in comments   Hemanth Selam
• [PATCH 0/6] ASoC: meson: gx: add base support for I2S audio input   Valerio Setti
• [PATCH 1/6] dt-bindings: sound: amlogic: add schemas for audin components   Valerio Setti
• [PATCH 2/6] ASoC: meson: add audin main module and I2S formatter   Valerio Setti
• [PATCH 3/6] ASoC: meson: add audin FIFO driver   Valerio Setti
• [PATCH 4/6] ASoC: meson: aiu: add I2S Capture DAI   Valerio Setti
• [PATCH 5/6] ASoC: meson: gx-card: add support for audin FIFO   Valerio Setti
• [PATCH 6/6] arm64: dts: amlogic: gx: add nodes for audin and its FIFOs   Valerio Setti
• [PATCH 2/6] ASoC: meson: add audin main module and I2S formatter   Valerio Setti
• [PATCH v2 0/6] ASoC: meson: gx: add base support for I2S audio input   Valerio Setti
• [PATCH v2 1/6] ASoC: dt-bindings: amlogic,gx-audin: add schema   Valerio Setti
• [PATCH v2 2/6] ASoC: meson: build gx-formatter as a separate module   Valerio Setti
• [PATCH v2 3/6] ASoC: meson: add AUDIN driver   Valerio Setti
• [PATCH v2 4/6] ASoC: meson: aiu: add I2S Capture DAI   Valerio Setti
• [PATCH v2 5/6] ASoC: meson: gx-card: add support for audin FIFO   Valerio Setti
• [PATCH v2 6/6] arm64: dts: amlogic: gx: add AUDIN node   Valerio Setti
• [PATCH v2 4/6] ASoC: meson: aiu: add I2S Capture DAI   Valerio Setti
• [PATCH v3 0/7] ASoC: meson: gx: add base support for I2S audio input   Valerio Setti
• [PATCH v3 1/7] ASoC: dt-bindings: amlogic,gx-audin: add schema   Valerio Setti
• [PATCH v3 2/7] ASoC: meson: build gx-formatter as a separate module   Valerio Setti
• [PATCH v3 3/7] ASoC: meson: aiu-encoder-i2s: ensure clk divider gets disabled in hw_free   Valerio Setti
• [PATCH v3 4/7] ASoC: meson: add AUDIN driver   Valerio Setti
• [PATCH v3 5/7] ASoC: meson: aiu: add I2S Capture DAI   Valerio Setti
• [PATCH v3 6/7] ASoC: meson: gx-card: add support for audin FIFO   Valerio Setti
• [PATCH v3 7/7] arm64: dts: amlogic: gx: add AUDIN node   Valerio Setti
• [PATCH v3 1/7] ASoC: dt-bindings: amlogic,gx-audin: add schema   Valerio Setti
• [PATCH v5 2/3] nvmem: core: deprecate reg_write callback with reg_write_const   Andy Shevchenko
• [PATCH 2/3] i2c: amlogic: Add Amlogic A9 I2C controller driver   Andi Shyti
• (subset) [PATCH 0/4] arm64: amlogic: t7: describe the VIM4 supplies and keep the fabric clocks running   Lucas Tanure
• [PATCH 0/4] amlogic: t7: give the MMC bus pipeline clock real consumers   Lucas Tanure
• [PATCH 1/4] dt-bindings: mmc: amlogic,meson-gx-mmc: document the T7 pipeline clock   Lucas Tanure
• [PATCH 2/4] mmc: meson-gx: enable the bus pipeline clock on T7   Lucas Tanure
• [PATCH 3/4] arm64: dts: amlogic: t7: add the pipeline clock to the MMC controllers   Lucas Tanure
• [PATCH 4/4] clk: meson: t7: don't mark sys_ampipe_nand as critical   Lucas Tanure
• [PATCH v2 0/4] amlogic: t7: give the MMC bus pipeline clock real consumers   Lucas Tanure
• [PATCH v2 1/4] dt-bindings: mmc: amlogic,meson-gx-mmc: document the T7 pipeline clock   Lucas Tanure
• [PATCH v2 2/4] mmc: meson-gx: enable the bus pipeline clock on T7   Lucas Tanure
• [PATCH v2 3/4] arm64: dts: amlogic: t7: add the pipeline clock to the MMC controllers   Lucas Tanure
• [PATCH v2 4/4] clk: meson: t7: don't mark sys_ampipe_nand as critical   Lucas Tanure
• [PATCH v2 4/4] clk: meson: t7: don't mark sys_ampipe_nand as critical   Lucas Tanure
• [PATCH v2 0/4] amlogic: t7: give the MMC bus pipeline clock real consumers   Lucas Tanure
• [PATCH net-next v2 0/3] net: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH net-next v2 1/3] net: macb: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH net-next v2 2/3] net: mdio: mux-meson-g12a: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH net-next v2 3/3] net: phy: air_en8811h: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH] pinctrl: meson: Fix typo in s4 group name   Linus Walleij
• [PATCH 1/2] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Herbert Xu
• [PATCH v2] crypto: amlogic: Fix DMA memory leak in cipher error path   Herbert Xu
• [PATCH v2] crypto/amlogic: Use devm APIs for clock management   Herbert Xu
• [PATCH] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Herbert Xu
• [PATCH v4] crypto/amlogic: Use devm APIs for clock management   Herbert Xu
• [PATCH v3] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Herbert Xu
• [PATCH] pmdomain: amlogic: Keep Amlogic A9 ETH domain always on   Qingpeng Yang
• [PATCH] pmdomain: amlogic: Keep Amlogic A9 ETH domain always on   Qingpeng Yang
• [PATCH v4 19/19] media: meson-ir-tx: Validate carrier and duty_cycle   Sean Young
• [PATCH v5 20/20] media: meson-ir-tx: Prevent divide by zero in meson_irtx_prepare_pulse()   Sean Young
• [PATCH 0/2] Add initial device tree support for the Xiaomi Mi Box 4 (MDZ-21-AA), an Amlogic S905L based TV box.   YuChia-Kan
• [PATCH 1/2] dt-bindings: arm: amlogic: add Xiaomi Mi Box 4   YuChia-Kan
• [PATCH 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   YuChia-Kan
• [PATCH v2 0/2] Add initial device tree support for the Xiaomi Mi Box 4 (MDZ-21-AA), an Amlogic S905L based TV box.   YuChia-Kan
• [PATCH v2 1/2] dt-bindings: arm: amlogic: add Xiaomi Mi Box 4   YuChia-Kan
• [PATCH v2 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   YuChia-Kan
• [PATCH v3 0/2] Add initial device tree support for the Xiaomi Mi Box 4 (MDZ-21-AA), an Amlogic S905L based TV box.   YuChia-Kan
• [PATCH v3 1/2] dt-bindings: arm: amlogic: add Xiaomi Mi Box 4   YuChia-Kan
• [PATCH v3 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   YuChia-Kan
• [PATCH v7 0/2] PCI: Configure Root Port MPS during host probing   Hans Zhang
• [PATCH v8 0/2] PCI: Configure Root Port MPS during host probing   Hans Zhang
• [PATCH v8 1/2] PCI: Configure Root Port MPS during host probing   Hans Zhang
• [PATCH v8 2/2] PCI: dwc: Remove redundant MPS configuration   Hans Zhang
• [PATCH v8 2/2] PCI: dwc: Remove redundant MPS configuration   Hans Zhang
• [PATCH 0/2] PCI: dwc: Clean up DWC PCIe register macros   Hans Zhang
• [PATCH 1/2] PCI: dwc: Align register macros with Synopsys documentation   Hans Zhang
• [PATCH 2/2] PCI: dwc: Remove unused PCIE_ATU_UNR_* register definitions   Hans Zhang
• [PATCH v9 0/3] PCI: Configure Root Port MPS during host probing   Hans Zhang
• [PATCH v9 1/3] PCI: Match the hierarchy's MPS to a device's MPSS as necessary   Hans Zhang
• [PATCH v9 2/3] PCI: Configure Root Port MPS during host probing   Hans Zhang
• [PATCH v9 3/3] PCI: dwc: Remove redundant MPS configuration   Hans Zhang
• [PATCH v9 1/3] PCI: Match the hierarchy's MPS to a device's MPSS as necessary   Hans Zhang
• [PATCH v9 2/3] PCI: Configure Root Port MPS during host probing   Hans Zhang
• [PATCH 1/2] PCI: dwc: Align register macros with Synopsys documentation   Hans Zhang
• [PATCH] rtc: amlogic-a4: clear unsupported update interrupt feature   Xianwei Zhao
• [PATCH v12 1/3] dt-bindings: dma: Add Amlogic A9 SoC DMA   Xianwei Zhao
• [PATCH v5 2/2] thermal: amlogic: Add support for A9 thermal controller   Xianwei Zhao
• [PATCH 1/3] dt-bindings: i2c: add Amlogic A9 I2C controller   Xianwei Zhao
• [PATCH 2/3] i2c: amlogic: Add Amlogic A9 I2C controller driver   Xianwei Zhao
• [PATCH v11 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   linux-kernel-dev at aliel.fr
• [PATCH 1/2] dt-bindings: thermal: amlogic: describe bus clock for t7-thermal   linux-kernel-dev at aliel.fr
• [PATCH 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   linux-kernel-dev at aliel.fr
• [PATCH v2 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   linux-kernel-dev at aliel.fr
• [PATCH v2 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   linux-kernel-dev at aliel.fr
• [PATCH net-next v15 2/9] dt-bindings: phy: document the serdes PHY on sa8255p   netdev-bot+sashiko at kernel.org
• [PATCH net-next v15 3/9] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems   netdev-bot+sashiko at kernel.org
• [PATCH net-next v15 4/9] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems   netdev-bot+sashiko at kernel.org
• [PATCH net-next v15 5/9] net: stmmac: qcom-ethqos: set serdes mode before powerup   netdev-bot+sashiko at kernel.org
• [PATCH net-next v15 6/9] net: stmmac: qcom-ethqos: update phy_mode to the resolved interface in mac_finish()   netdev-bot+sashiko at kernel.org
• [PATCH net-next v15 8/9] net: stmmac: qcom-ethqos: factor out linux-level setup into a separate function   netdev-bot+sashiko at kernel.org
• [PATCH net-next v15 9/9] net: stmmac: qcom-ethqos: add support for sa8255p   netdev-bot+sashiko at kernel.org
• [PATCH net-next v2 0/3] net: Make sure clk_init_data is fully initialized   patchwork-bot+netdevbpf at kernel.org
• [PATCH v10 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   sashiko-bot at kernel.org
• [PATCH v10 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   sashiko-bot at kernel.org
• [PATCH v10 5/6] arm64: dts: amlogic: t7: Add i2c controller node   sashiko-bot at kernel.org
• [PATCH v10 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   sashiko-bot at kernel.org
• [PATCH v10 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   sashiko-bot at kernel.org
• [PATCH v10 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   sashiko-bot at kernel.org
• [PATCH v11 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   sashiko-bot at kernel.org
• [PATCH v11 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   sashiko-bot at kernel.org
• [PATCH v11 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   sashiko-bot at kernel.org
• [PATCH v11 5/6] arm64: dts: amlogic: t7: Add i2c controller node   sashiko-bot at kernel.org
• [PATCH v11 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   sashiko-bot at kernel.org
• [PATCH v11 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   sashiko-bot at kernel.org
• [PATCH 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   sashiko-bot at kernel.org
• [PATCH v12 2/3] dmaengine: amlogic: Add general DMA driver for A9   sashiko-bot at kernel.org
• [PATCH v2 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   sashiko-bot at kernel.org
• [PATCH] rtc: fix typos in comments   sashiko-bot at kernel.org
• [PATCH] drm/meson: fix device_node leak in meson_encoder_dsi_probe()   sashiko-bot at kernel.org
• [PATCH] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   sashiko-bot at kernel.org
• [PATCH v4 19/19] media: meson-ir-tx: Validate carrier and duty_cycle   sashiko-bot at kernel.org
• [PATCH net-next v14 03/10] phy: qcom: add the SGMII SerDes PHY driver for SCMI systems   sashiko-bot at kernel.org
• [PATCH v5 2/2] thermal: amlogic: Add support for A9 thermal controller   sashiko-bot at kernel.org
• [PATCH 03/10] soc: amlogic: clk-measure: Add support for more SoCs   sashiko-bot at kernel.org
• [PATCH v8 1/2] PCI: Configure Root Port MPS during host probing   sashiko-bot at kernel.org
• [PATCH v8 2/2] PCI: dwc: Remove redundant MPS configuration   sashiko-bot at kernel.org
• [PATCH 2/2] PCI: dwc: Remove unused PCIE_ATU_UNR_* register definitions   sashiko-bot at kernel.org
• [PATCH 1/2] PCI: dwc: Align register macros with Synopsys documentation   sashiko-bot at kernel.org
• [PATCH 3/6] ASoC: meson: add audin FIFO driver   sashiko-bot at kernel.org
• [PATCH] tty: serial: meson: fix UART driver lifetime   sashiko-bot at kernel.org
• [PATCH] spi: amlogic-spisg: Balance runtime PM and clock cleanup   sashiko-bot at kernel.org
• [PATCH v9 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   sashiko-bot at kernel.org
• [PATCH v9 2/6] firmware: meson: sm: Add video firmware loading SMC call   sashiko-bot at kernel.org
• [PATCH v9 4/6] decoder: Add V4L2 stateless H.264 decoder driver   sashiko-bot at kernel.org
• [PATCH] pmdomain: amlogic: Keep Amlogic A9 ETH domain always on   sashiko-bot at kernel.org
• [PATCH v9 3/3] PCI: dwc: Remove redundant MPS configuration   sashiko-bot at kernel.org
• [PATCH v9 2/3] PCI: Configure Root Port MPS during host probing   sashiko-bot at kernel.org
• [PATCH v9 1/3] PCI: Match the hierarchy's MPS to a device's MPSS as necessary   sashiko-bot at kernel.org
• [PATCH v3] crypto/amlogic: Use devm APIs for clock management   sashiko-bot at kernel.org
• [PATCH] drm/meson: Fix next_bridge reference leak in meson_encoder_dsi_probe()   sashiko-bot at kernel.org
• [PATCH v12 5/6] arm64: dts: amlogic: t7: Add i2c controller node   sashiko-bot at kernel.org
• [PATCH v12 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   sashiko-bot at kernel.org
• [PATCH v12 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   sashiko-bot at kernel.org
• [PATCH v12 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   sashiko-bot at kernel.org
• [PATCH v12 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   sashiko-bot at kernel.org
• [PATCH v12 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   sashiko-bot at kernel.org
• [PATCH] dt-bindings: Expand flow lists to block lists   sashiko-bot at kernel.org
• [PATCH v2 1/6] ASoC: dt-bindings: amlogic,gx-audin: add schema   sashiko-bot at kernel.org
• [PATCH v2 3/6] ASoC: meson: add AUDIN driver   sashiko-bot at kernel.org
• [PATCH v2 4/6] ASoC: meson: aiu: add I2S Capture DAI   sashiko-bot at kernel.org
• [PATCH v2] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   sashiko-bot at kernel.org
• [PATCH v6 2/4] nvmem: core: deprecate reg_write callback with reg_write_const   sashiko-bot at kernel.org
• [PATCH v6 4/4] nvmem: enable COMPILE_TEST for more drivers   sashiko-bot at kernel.org
• [PATCH v5 5/8] drm/bridge: pass down IRQ_HPD to the drivers   sashiko-bot at kernel.org
• [PATCH v5 6/8] drm/msm: dp: handle the IRQ_HPD events reported by USB-C   sashiko-bot at kernel.org
• [PATCH 2/3] dt-bindings: net: meson-dwmac: add T7 support   sashiko-bot at kernel.org
• [PATCH 3/3] arm64: dts: amlogic: add T7 peripheral nodes   sashiko-bot at kernel.org
• [PATCH v3 5/7] ASoC: meson: aiu: add I2S Capture DAI   sashiko-bot at kernel.org
• [PATCH v3 4/7] ASoC: meson: add AUDIN driver   sashiko-bot at kernel.org
• [PATCH RFC 1/3] clk: meson: pll: Remove the dedicated n parameter   sashiko-bot at kernel.org
• [PATCH RFC 3/3] clk: meson: t7: Model PLL pre-divider as a divider clock   sashiko-bot at kernel.org
• [PATCH 2/2] thermal/drivers/amlogic: switch to clk_bulk API to support multiple clocks   sashiko-bot at kernel.org
• [PATCH 1/2] dt-bindings: thermal: amlogic: describe bus clock for t7-thermal   sashiko-bot at kernel.org
• [PATCH v2 1/2] dt-bindings: thermal: amlogic: describe bus clock for t7-thermal   sashiko-bot at kernel.org
• [PATCH v10 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   sashiko-bot at kernel.org
• [PATCH v10 4/6] decoder: Add V4L2 stateless H.264 decoder driver   sashiko-bot at kernel.org
• [PATCH 1/3] dt-bindings: i2c: add Amlogic A9 I2C controller   sashiko-bot at kernel.org
• [PATCH 2/3] i2c: amlogic: Add Amlogic A9 I2C controller driver   sashiko-bot at kernel.org
• [PATCH] usb: dwc3: meson-g12a: disable VBUS regulator on remove   sashiko-bot at kernel.org
• [PATCH net-next v15 4/9] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems   sashiko-bot at kernel.org
• [PATCH 1/3] dt-bindings: pwm: amlogic: Add core clock for T7   sashiko-bot at kernel.org
• [PATCH v2 3/3] arm64: dts: amlogic: add T7 peripheral nodes   sashiko-bot at kernel.org
• [PATCH v3 1/3] dt-bindings: pwm: amlogic: Add core clock for S4 like   sashiko-bot at kernel.org
• [PATCH] media: meson: vdec: size capture planes from the aligned canvas   sashiko-bot at kernel.org
• [RFC PATCH 4/4] PCI: meson: Remove redundant MPS configuration   sashiko-bot at kernel.org
• [RFC PATCH 2/4] PCI: Match the hierarchy's MPS to a device's MPSS as necessary   sashiko-bot at kernel.org
• [RFC PATCH 1/4] PCI: Update saved Max Payload Size in pcie_set_mps()   sashiko-bot at kernel.org
• [RFC PATCH 3/4] PCI: Configure Root Port MPS after scanning its hierarchy   sashiko-bot at kernel.org
• [PATCH 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   neil.armstrong at linaro.org
• [PATCH v2 2/2] arm64: dts: amlogic: add Xiaomi Mi Box 4 support   neil.armstrong at linaro.org

Last message date: Wed Sep 30 16:33:34 PDT 2026
Archived on: Wed Sep 30 16:33:39 PDT 2026

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...