[PATCH v9 3/3] PCI: dwc: Remove redundant MPS configuration
Hans Zhang
18255117159 at 163.com
Wed Sep 16 08:39:07 PDT 2026
The Meson PCIe controller driver manually configures maximum payload
size (MPS) through meson_set_max_payload, duplicating functionality now
centralized in the PCI core. Deprecating redundant code simplifies the
driver and aligns it with the consolidated MPS management strategy,
improving long-term maintainability.
With meson_set_max_payload() gone, meson_size_to_payload() is only used
for MRRS. Rename it to meson_size_to_mrrs(), update the warning message,
and drop the now-unused PCIE_CAP_MAX_PAYLOAD_SIZE and MAX_PAYLOAD_SIZE
macros.
Reviewed-by: Manivannan Sadhasivam <mani at kernel.org>
Signed-off-by: Hans Zhang <18255117159 at 163.com>
---
drivers/pci/controller/dwc/pci-meson.c | 25 +++----------------------
1 file changed, 3 insertions(+), 22 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index 8559d132dcde..1d3687566dda 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -21,7 +21,6 @@
#define to_meson_pcie(x) dev_get_drvdata((x)->dev)
-#define PCIE_CAP_MAX_PAYLOAD_SIZE(x) ((x) << 5)
#define PCIE_CAP_MAX_READ_REQ_SIZE(x) ((x) << 12)
/* PCIe specific config registers */
@@ -37,7 +36,6 @@
#define PM_CURRENT_STATE(x) (((x) >> 7) & 0x1)
#define PORT_CLK_RATE 100000000UL
-#define MAX_PAYLOAD_SIZE 256
#define MAX_READ_REQ_SIZE 256
#define PCIE_RESET_DELAY 500
#define PCIE_SHARED_RESET 1
@@ -256,7 +254,7 @@ static void meson_pcie_ltssm_enable(struct meson_pcie *mp)
meson_cfg_writel(mp, val, PCIE_CFG0);
}
-static int meson_size_to_payload(struct meson_pcie *mp, int size)
+static int meson_size_to_mrrs(struct meson_pcie *mp, int size)
{
struct device *dev = mp->pci.dev;
@@ -266,35 +264,19 @@ static int meson_size_to_payload(struct meson_pcie *mp, int size)
* than 2^12, just set to default size 2^(1+7).
*/
if (!is_power_of_2(size) || size < 128 || size > 4096) {
- dev_warn(dev, "payload size %d, set to default 256\n", size);
+ dev_warn(dev, "MRRS %d, set to default 256\n", size);
return 1;
}
return fls(size) - 8;
}
-static void meson_set_max_payload(struct meson_pcie *mp, int size)
-{
- struct dw_pcie *pci = &mp->pci;
- u32 val;
- u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
- int max_payload_size = meson_size_to_payload(mp, size);
-
- val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
- val &= ~PCI_EXP_DEVCTL_PAYLOAD;
- dw_pcie_writel_dbi(pci, offset + PCI_EXP_DEVCTL, val);
-
- val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
- val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
- dw_pcie_writel_dbi(pci, offset + PCI_EXP_DEVCTL, val);
-}
-
static void meson_set_max_rd_req_size(struct meson_pcie *mp, int size)
{
struct dw_pcie *pci = &mp->pci;
u32 val;
u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
- int max_rd_req_size = meson_size_to_payload(mp, size);
+ int max_rd_req_size = meson_size_to_mrrs(mp, size);
val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
val &= ~PCI_EXP_DEVCTL_READRQ;
@@ -363,7 +345,6 @@ static int meson_pcie_host_init(struct dw_pcie_rp *pp)
pp->bridge->ops = &meson_pci_ops;
- meson_set_max_payload(mp, MAX_PAYLOAD_SIZE);
meson_set_max_rd_req_size(mp, MAX_READ_REQ_SIZE);
return 0;
--
2.34.1
More information about the linux-amlogic
mailing list