[PATCH v9 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder

[Krzysztof Kozlowski]

On Mon, Sep 14, 2026 at 04:10:20PM +0800, Zhentao Guo wrote:
> Describe the initial support for the V4L2 stateless video decoder
> driver used with the Amlogic S4 (S805X2) platform.

Drop driver. Describe the hardware instead.

> 
> Signed-off-by: Zhentao Guo <zhentao.guo at amlogic.com>
> ---
>  .../devicetree/bindings/media/amlogic,s4-vdec.yaml | 114 +++++++++++++++++++++
>  1 file changed, 114 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
> new file mode 100644
> index 000000000000..d350b3e68a38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
> @@ -0,0 +1,114 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2025 Amlogic, Inc. All rights reserved
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/amlogic,s4-vdec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Video Decode Accelerator
> +
> +maintainers:
> +  - Zhentao Guo <zhentao.guo at amlogic.com>
> +
> +description:
> +  The Video Decoder Accelerator present on Amlogic SOCs.
> +  It supports stateless h264 decoding.
> +
> +properties:
> +  compatible:
> +    const: amlogic,s4-vdec
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: dos
> +      - const: dmc
> +
> +  interrupts:
> +    maxItems: 2
> +
> +  interrupt-names:
> +    items:
> +      - const: core_hvdec
> +      - const: core_vdec

Drop "core_" from both... or rather some consistency would be more
useful. Below you call them core_v and core_h, but there is also:

> +
> +  clocks:
> +    items:
> +      - description: Clock for dos core

core dos?

> +      - description: Clock for vdec core
> +      - description: Clock for hvdec core
> +
> +  clock-names:
> +    items:
> +      - const: dos
> +      - const: core_v

hvdec?

> +      - const: core_h

vdec? to keep the naming and order of interrupts?

> +
> +  power-domains:
> +    maxItems: 2
> +
> +  power-domain-names:
> +    items:
> +      - const: dos_v
> +      - const: dos_h

So there is also dos variant v and h?

Pretty confusing.

> +
> +  resets:
> +    maxItems: 1
> +
> +  amlogic,canvas:
> +    description: Canvas maintains an index-to-physical-address
> +     mapping table that allows the 16-bit AMRISC decoder core
> +     to access 32-bit or 64-bit physical address.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +  amlogic,secure-monitor:
> +    description: Used to decrypt and load the signed decoder
> +     firmware through ARM SMC (Secure Monitor Call).
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - power-domain-names
> +  - resets
> +  - amlogic,canvas
> +  - amlogic,secure-monitor
> +
> +additionalProperties: false

Best regards,
Krzysztof