[PATCH 1/2] dt-bindings: thermal: amlogic: describe bus clock for t7-thermal

[Krzysztof Kozlowski]

On 23/09/2026 13:51, Ronald Claveau via B4 Relay wrote:
> From: Ronald Claveau <linux-kernel-dev at aliel.fr>
> 
> The t7 thermal sensor needs a bus clock, in addition to the existing
> functional clock, to gate register access to the sensor. This bus
> clock is specific to each sensor, unlike the functional clock which
> is shared between sensors. The current binding only describes a
> single unnamed clock and therefore cannot represent this hardware
> requirement, so add clock-names to disambiguate "bus" from "core" and

Index distinguishes, not the clock-names because items have strict
order. That part of sentence is redundant and more important - if I ack
this patch, people will use it as an argument in the future review
discussions.

Drop this part of sentence. clock-names are fine if you need them, but
still the disambiguation is provided by indices.

> make the second clock mandatory for the t7-thermal compatible only


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>


Best regards,
Krzysztof