April 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Apr 2 07:41:01 EDT 2011
Ending: Fri Apr 29 14:38:33 EDT 2011
Messages: 254

• Mini2440 questions   Zoltán Kócsi
• Mini2440 questions   Juergen Beisert
• Mini2440 questions   Belisko Marek
• Mini2440 questions   Juergen Beisert
• [PATCH] Nios2: Add Altera UART driver   franck.jullien at gmail.com
• [PATCH] Nios2: Add Altera UART driver   Marc Kleine-Budde
• [PATCH] Nios2: Add Altera UART driver   Franck JULLIEN
• [PATCH] Nios2: Add Altera UART driver   Franck JULLIEN
• [PATCH] Nios2: Add Altera UART driver   Marc Kleine-Budde
• [PATCH] [v2] Nios2: Add Altera UART driver   franck.jullien at gmail.com
• [PATCH] Nios2: Add Altera TSE MAC driver   franck.jullien at gmail.com
• [PATCH] Nios2: Add Altera UART driver   Sascha Hauer
• [PATCH] [v2] Nios2: Add Altera UART driver   Marc Kleine-Budde
• [PATCH] at91sam9263ek: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
• More Mini2440 questions...   Zoltán Kócsi
• More Mini2440 questions...   Juergen Beisert
• More Mini2440 questions...   Zoltán Kócsi
• More Mini2440 questions...   Juergen Beisert
• More Mini2440 questions...   Marc Kleine-Budde
• v2011.04.0   Sascha Hauer
• various fixes and updates   Sascha Hauer
• [PATCH 1/7] arm: update mach-types   Sascha Hauer
• [PATCH 2/7] driver: Do not forget to remove device from active list   Sascha Hauer
• [PATCH 3/7] memcpy command: do not set read/write size   Sascha Hauer
• [PATCH 4/7] mmc: check correctness of the voltage mask in ocr   Sascha Hauer
• [PATCH 5/7] fs: errno should be set correctly before the end of functions   Sascha Hauer
• [PATCH 6/7] usbnet: do not initialize ethernet device from usb device   Sascha Hauer
• [PATCH 7/7] ARM: Add missing parameter name   Sascha Hauer
• On the road to omap4   Sascha Hauer
• [PATCH 1/9] ARM omap: move uart access functions to a more generic place   Sascha Hauer
• [PATCH 2/9] ARM omap: rework gpio support   Sascha Hauer
• [PATCH 3/9] ARM omap: move devices-gpmc-nand.c to omap architecture directory   Sascha Hauer
• [PATCH 4/9] ARM omap: move architecture specific kconfig entries to arch part   Sascha Hauer
• [PATCH 5/9] ARM omap: allow to put omap boards into another directory   Sascha Hauer
• [PATCH 6/9] ARM omap4: fix indention in Kconfig   Sascha Hauer
• [PATCH 7/9] omap: rename GPMC Kconfig entry to OMAP_GPMC   Sascha Hauer
• [PATCH 8/9] arm omap: remove unused request/free gpio functions   Sascha Hauer
• [PATCH 9/9] ARM omap: make gpio support mandatory   Sascha Hauer
• several driver update   Sascha Hauer
• [PATCH 1/6] usb net: Add SMSC95xx support   Sascha Hauer
• [PATCH 2/6] net smc911x: Add LAN9221 support   Sascha Hauer
• [PATCH 3/6] mci: Add omap hsmmc driver   Sascha Hauer
• [PATCH 4/6] mtd nand omap: Pass ecc mode from platform   Sascha Hauer
• [PATCH 5/6] mtd nand omap: make ecc mode runtime configurable   Sascha Hauer
• [PATCH 6/6] mtd nand omap: Add BCH ecc support   Sascha Hauer
• ARM: cleanup boot commands   Sascha Hauer
• [PATCH 1/5] ARM: Add missing parameter name in armlinux_set_serial   Sascha Hauer
• [PATCH 2/5] ARM: factor out a start_linux function   Sascha Hauer
• [PATCH 3/5] ARM: move bootm code to its own file   Sascha Hauer
• [PATCH 4/5] ARM: move bootz code to its own file   Sascha Hauer
• [PATCH 5/5] ARM: move bootu code to its own file   Sascha Hauer
• Nand: make nand support more configurable   Sascha Hauer
• [PATCH 01/12] commands: Make nand command optional   Sascha Hauer
• [PATCH 02/12] nand: remove unused suspend/resume functions   Sascha Hauer
• [PATCH 03/12] nand: remove unneeded nand_[get|release]_device functions   Sascha Hauer
• [PATCH 04/12] nand: do not fall through in nand_scan_tail()   Sascha Hauer
• [PATCH 05/12] nand: Factor out hw ecc support to seperate file   Sascha Hauer
• [PATCH 06/12] nand: factor out software ecc support to seperate file   Sascha Hauer
• [PATCH 07/12] nand: factor out syndrome support to seperate file   Sascha Hauer
• [PATCH 08/12] nand: factor out nand write support   Sascha Hauer
• [PATCH 09/12] nand: Make write support optional   Sascha Hauer
• More Mini2440 questions...   Zoltán Kócsi
• More Mini2440 questions...   Zoltán Kócsi
• [PATCH] Nios2: Add Altera TSE MAC driver   Sascha Hauer
• [PATCH 1/1] freescale-mx35-3-stack: Add mmc0   Thomas Mayer
• [PATCH 1/1] freescale-mx35-3-stack: Add mmc0   Sascha Hauer
• Fallback environment in barebox   Sascha Hauer
• [PATCH 1/1] freescale-mx35-3-stack: Add mmc0   Thomas Mayer
• [PATCH 1/1] freescale-mx35-3-stack: Add mmc0   Thomas Mayer
• Update barebox on mmc without touching partition table   Thomas Mayer
• [PATCH 0/7] defaultenv updates   Marc Kleine-Budde
• [PATCH 1/7] defaultenv: simplify scripting   Marc Kleine-Budde
• [PATCH 2/7] defaultenv: boot: add backwards compatibility for kernel_loc=net   Marc Kleine-Budde
• [PATCH 3/7] defaultenv: boot: add eth0 to ip configuration   Marc Kleine-Budde
• [PATCH 4/7] defaultenv: boot: add serverip to static ip configuration   Marc Kleine-Budde
• [PATCH 5/7] defaultenv: boot: add support to boot from disk   Marc Kleine-Budde
• [PATCH 6/7] defaultenv: update: add support to update kernel on disk   Marc Kleine-Budde
• [PATCH 7/7] defaultenv: add config template   Marc Kleine-Budde
• [PATCH 0/2] mxs: add mx28-evk   Marc Kleine-Budde
• [PATCH 1/2] mxs: import mxs_iomux_setup_multiple_pads from kernel   Marc Kleine-Budde
• [PATCH 2/2] mxs: add support for mx28-evk   Marc Kleine-Budde
• [PATCH 0/7] defaultenv updates   Marc Kleine-Budde
• [PATCH 0/2] mxs: add mx28-evk   Marc Kleine-Budde
• [PATCH 1/7] defaultenv: simplify scripting   Sascha Hauer
• [PATCH 1/7] defaultenv: simplify scripting   Marc Kleine-Budde
• [PATCH 1/7 v2] defaultenv: simplify scripting   Marc Kleine-Budde
• Update barebox on mmc without touching partition table   Sascha Hauer
• [PATCH 2/7] defaultenv: boot: add backwards compatibility for kernel_loc=net   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] defaultenv boot updates   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] defaultenv: boot: add support to boot from disk   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] defaultenv/boot: switch to getopt   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] defaultenv/boot: add -k and -t option to specify the kernel location and image type   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] defaultenv/boot: add -r and -T option to select rootfs location and type   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] defaultenv/boot: add -i option to select the ip mode   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv: add config template   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] defaultenv: add config template   Marc Kleine-Budde
• [PATCH 2/7] defaultenv: boot: add backwards compatibility for kernel_loc=net   Marc Kleine-Budde
• various cleanup patches   Sascha Hauer
• [PATCH 01/16] fs: remove unused field 'type' from struct fs_driver_d   Sascha Hauer
• [PATCH 02/16] mci: make it compile without info support   Sascha Hauer
• [PATCH 03/16] ubi: do not use filep   Sascha Hauer
• [PATCH 04/16] devfs: remove unused struct filep* argument from open/close   Sascha Hauer
• [PATCH 05/16] fs: implement flush function   Sascha Hauer
• [PATCH 06/16] devfs: factor out core devfs functionality   Sascha Hauer
• [PATCH 07/16] nand: remove unused header file   Sascha Hauer
• [PATCH 08/16] startup: we can only mount root and devfs when compiled in   Sascha Hauer
• [PATCH 09/16] nand: remove unused nand_util file   Sascha Hauer
• [PATCH 10/16] move version_string to seperate file   Sascha Hauer
• [PATCH 11/16] fs: use safe_strncpy instead of sprintf   Sascha Hauer
• [PATCH 12/16] script: update git ignore file   Sascha Hauer
• [PATCH 13/16] serial 16550: use xzalloc   Sascha Hauer
• [PATCH 14/16] ARM: compile in image size and magic into barebox image   Sascha Hauer
• [PATCH 15/16] commands: seperate usb command from usb core   Sascha Hauer
• [PATCH 16/16] fs mount: fix error handling   Sascha Hauer
• No subject   Sascha Hauer
• [PATCH 1/4] add block support   Sascha Hauer
• [PATCH 2/4] ata: use block support   Sascha Hauer
• [PATCH 3/4] ata: make write support optional   Sascha Hauer
• [PATCH 4/4] mci: make write support optional   Sascha Hauer
• Size reduction patches   Sascha Hauer
• [PATCH 1/8] env: Make environment variable support optional   Sascha Hauer
• [PATCH 2/8] make command support optional   Sascha Hauer
• [PATCH 3/8] add noshell support   Sascha Hauer
• [PATCH 4/8] arm: compile icache command only when command support is present   Sascha Hauer
• [PATCH 5/8] malloc: put common memory functions to seperate file   Sascha Hauer
• [PATCH 6/8] add dummy_malloc functions   Sascha Hauer
• [PATCH 7/8] ARM: make exception handling optional   Sascha Hauer
• [PATCH 8/8] nand: make reading oob optional   Sascha Hauer
• Sparc/Leon3 support?   simon at mungewell.org
• Sparc/Leon3 support?   Robert Schwebel
• [PATCH 2/2] mxs: add support for mx28-evk   Sascha Hauer
• [PATCH 1/2] mxs: import mxs_iomux_setup_multiple_pads from kernel   Sascha Hauer
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   franck.jullien at gmail.com
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   franck.jullien at gmail.com
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/16] ARM: compile in image size and magic into barebox image   Marc Reilly
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   Franck JULLIEN
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   Franck JULLIEN
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   Jean-Christophe PLAGNIOL-VILLARD
• imx25 3 stack problem   Omar Pighi
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   Franck JULLIEN
• imx25 3 stack problem   Sascha Hauer
• [PATCH 14/16] ARM: compile in image size and magic into barebox image   Sascha Hauer
• [PATCH 14/16] ARM: compile in image size and magic into barebox image   Robert Schwebel
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   Sascha Hauer
• [PATCH] [v2] Nios2: Add Altera TSE MAC driver   Franck JULLIEN
• [PATCH 2/2] mxs: add support for mx28-evk   Marc Kleine-Budde
• [PATCH 14/16] ARM: compile in image size and magic into barebox image   Marc Reilly
• [PATCH 0/4] defaultenv boot updates   Sascha Hauer
• [PATCH 0/4] defaultenv boot updates   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] defaultenv boot updates   Sascha Hauer
• lcd clock   Vanalme Filip
• lcd clock   Juergen Beisert
• omap nand patches   Sascha Hauer
• [PATCH 1/5] nand omap: fix hamming romcode ecc code   Sascha Hauer
• [PATCH 2/5] nand omap: turn debug messages into dev_dbg   Sascha Hauer
• [PATCH 3/5] nand omap: use standard debug functions   Sascha Hauer
• [PATCH 4/5] nand omap: use xzalloc instead of calloc   Sascha Hauer
• [PATCH 5/5] nand omap: handle erased pages correctly in hamming ecc mode   Sascha Hauer
• nand patches   Sascha Hauer
• [PATCH 1/4] nand: nand_block_markbad is only used with nand write support   Sascha Hauer
• [PATCH 2/4] nand: move bb handling code to drivers/mtd/nand   Sascha Hauer
• [PATCH 3/4] nand bb: switch to cdev operations   Sascha Hauer
• [PATCH 4/4] nand bb: add proper bb remove function   Sascha Hauer
• assorted patches   Sascha Hauer
• [PATCH 1/7] eth: check the result of edev->get_ethaddr   Sascha Hauer
• [PATCH 2/7] net: add a context to the packet handler   Sascha Hauer
• [PATCH 3/7] environment: make default env path configurable   Sascha Hauer
• [PATCH 4/7] move simple_itoa to libbb so that others can use it   Sascha Hauer
• [PATCH 5/7] kfifo: kfifo_put takes a const buffer   Sascha Hauer
• [PATCH 6/7] copy_file: handle write return value correctly   Sascha Hauer
• [PATCH 7/7] cp command: handle directories as last argument   Sascha Hauer
• FAT filesystem support   Sascha Hauer
• [PATCH] fs: add fat filesystem support   Sascha Hauer
• OMAP4 support   Sascha Hauer
• [PATCH 01/12] ARM omap: Add omap signGP tool and possibility to build ift images   Sascha Hauer
• [PATCH 02/12] mci omap: hsmmc is also found on the omap3   Sascha Hauer
• [PATCH 03/12] ARM omap: make sr32 a static inline function   Sascha Hauer
• [PATCH 04/12] ARM omap: Add omap4 support   Sascha Hauer
• [PATCH 05/12] ARM omap: add xload helper functions   Sascha Hauer
• [PATCH 06/12] ARM omap4: panda board support   Sascha Hauer
• [PATCH 07/12] add panda defconfigs   Sascha Hauer
• [PATCH 08/12] ARM omap4: Add pcm049 board support   Sascha Hauer
• [PATCH 09/12] ARM: add pcm049 defconfigs   Sascha Hauer
• [PATCH 10/12] ARM omap beagle: Add noshell support for booting from MMC   Sascha Hauer
• [PATCH 11/12] ARM omap beagle: update defconfig   Sascha Hauer
• [PATCH 12/12] ARM beagle board: add xload defconfig   Sascha Hauer
• [PATCH 0/3] Add Altera TSE driver   franck.jullien at gmail.com
• [PATCH 1/3] Fix coding style in driver/net/Makefile   franck.jullien at gmail.com
• [PATCH 2/3] [v3] Nios2: Add Altera TSE driver   franck.jullien at gmail.com
• [PATCH 3/3] Add platform data to the mac device   franck.jullien at gmail.com
• First time on this list   Marko Milutinovic
• First time on this list   Baruch Siach
• [PATCH 08/12] ARM omap4: Add pcm049 board support   Marc Kleine-Budde
• mci patches   Sascha Hauer
• [PATCH 1/3] mci: shrink string footprint   Sascha Hauer
• [PATCH 2/3] mci: turn several pr_* statements into debug   Sascha Hauer
• [PATCH 3/3] ata: guessing disk sizes is only needed on X86   Sascha Hauer
• [PATCH 06/12] ARM omap4: panda board support   Marc Kleine-Budde
• [PATCH 2/3] mci: turn several pr_* statements into debug   Juergen Beisert
• [PATCH 3/3] ata: guessing disk sizes is only needed on X86   Juergen Beisert
• [PATCH 2/3] mci: turn several pr_* statements into debug   Sascha Hauer
• First time on this list   Marko Milutinovic
• First time on this list   Jean-Christophe PLAGNIOL-VILLARD
• First time on this list   Marko Milutinovic
• First time on this list   Baruch Siach
• First time on this list   Marko Milutinovic
• Update barebox on mmc without touching partition table   Thomas Mayer
• Update barebox on mmc without touching partition table   Marc Kleine-Budde
• Update barebox on mmc without touching partition table   Thomas Mayer
• Update barebox on mmc without touching partition table   Marc Kleine-Budde
• Imx51 processor hangs when we do an md 0xf0000000 (memory display) in u-boot   Greg Topmiller
• Imx51 processor hangs when we do an md 0xf0000000 (memory display) in u-boot   Sascha Hauer
• Imx51 processor hangs when we do an md 0xf0000000 (memory display) in u-boot   Greg Topmiller
• on enviromen   Omar Pighi
• again on enviroment and partition problems   Omar Pighi
• again on enviroment and partition problems   Sascha Hauer
• New MACH Addition   Marko Milutinovic
• New MACH Addition   Sascha Hauer
• New MACH Addition   Robert Schwebel
• New MACH Addition   Marko Milutinovic
• New MACH Addition   Robert Schwebel
• again on enviroment and partition problems   Omar Pighi
• New MACH Addition   Jean-Christophe PLAGNIOL-VILLARD
• i.MX35 3-stack use only 128MB RAM   Thomas Mayer
• i.MX35 3-stack use only 128MB RAM   Boaz Ben-David
• i.MX35 3-stack use only 128MB RAM   Thomas Mayer
• i.MX35 3-stack use only 128MB RAM   Boaz Ben-David
• i.MX35 3-stack use only 128MB RAM   Thomas Mayer
• i.MX35 3-stack use only 128MB RAM   Boaz Ben-David
• Sandbox Segfaults   MJ
• [PATCH 0/4] defaultenv boot updates   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: add support to generate uImage   Jean-Christophe PLAGNIOL-VILLARD
• Sandbox Segfaults   Sascha Hauer
• [PATCH] arm: add support to generate uImage   Sascha Hauer
• Sandbox Segfaults   MJ
• [PATCH] arm: add support to generate uImage   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: add support to generate uImage   Sascha Hauer
• Freescale i.MX35 using CSD1 and 256 MiB DDR2   Roman Fietze
• Freescale i.MX35 using CSD1 and 256 MiB DDR2   Sascha Hauer
• [PATCH] freescale-mx35-3-stack: support 256 MiB RAM   Roman Fietze
• [PATCH] freescale-mx35-3-stack: support 256 MiB RAM   Marc Kleine-Budde
• [PATCH] freescale-mx35-3-stack: support 256 MiB RAM   Roman Fietze
• [PATCH] freescale-mx35-3-stack: support 256 MiB RAM   Marc Kleine-Budde
• [PATCH 2/3] [v3] Nios2: Add Altera TSE driver   Franck JULLIEN
• MAKEALL problem   Belisko Marek
• MAKEALL problem   Jean-Christophe PLAGNIOL-VILLARD
• MAKEALL problem   Belisko Marek
• MAKEALL problem   Jean-Christophe PLAGNIOL-VILLARD
• MAKEALL problem   Belisko Marek
• [bug] commands/loads.c:31: fatal error: exports.h: No such file or directory   Peter Gsellmann
• [bug] commands/loads.c:31: fatal error: exports.h: No such file or directory   Belisko Marek
• MAKEALL problem   Belisko Marek

Last message date: Fri Apr 29 14:38:33 EDT 2011
Archived on: Wed Jun 1 20:37:12 EDT 2011

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...