November 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Nov 2 00:33:48 PST 2015
Ending: Mon Nov 30 11:44:53 PST 2015
Messages: 229

• [PATCH 1/2] ath10k: Fix peer assoc complete WMI command for 10.4   Vasanthakumar Thiagarajan
  • [PATCH 2/2] ath10k: Fix peerid configuration in htt tx desc for htt version < 3.4   Vasanthakumar Thiagarajan
    • [PATCH 2/2] ath10k: Fix peerid configuration in htt tx desc for htt version < 3.4   Michal Kazior
      • [PATCH 2/2] ath10k: Fix peerid configuration in htt tx desc for htt version < 3.4   Vasanthakumar Thiagarajan
• Question: ath10k and tcpdump antenna noise information missing   Tomi Saarnio
  • Question: ath10k and tcpdump antenna noise information missing   Tomi Saarnio
    • Question: ath10k and tcpdump antenna noise information missing   Tomasz Skapski
      • Question: ath10k and tcpdump antenna noise information missing   Tomi Saarnio
      • Question: ath10k and tcpdump antenna noise information missing   Tomi Saarnio
• [PATCH 0/8] ath10k: clean up ath10k_skb_cb   Michal Kazior
  • [PATCH 1/8] ath10k: merge is_protected with nohwcrypt   Michal Kazior
  • [PATCH 2/8] ath10k: rename function to adhere to naming convention   Michal Kazior
  • [PATCH 3/8] ath10k: remove txmode from skb_cb   Michal Kazior
  • [PATCH 4/8] ath10k: remove is_offchan   Michal Kazior
  • [PATCH 5/8] ath10k: remove freq from skb_cb   Michal Kazior
  • [PATCH 6/8] ath10k: pack up flags in skb_cb   Michal Kazior
  • [PATCH 7/8] ath10k: replace vdev_id and tid in skb cb   Michal Kazior
    • [PATCH 7/8] ath10k: replace vdev_id and tid in skb cb   Michal Kazior
  • [PATCH 8/8] ath10k: store msdu_id instead of txbuf pointers   Michal Kazior
  • [PATCH v2 0/9] ath10k: clean up ath10k_skb_cb   Michal Kazior
    • [PATCH v2 3/9] ath10k: remove txmode from skb_cb   Michal Kazior
    • [PATCH v2 4/9] ath10k: remove is_offchan   Michal Kazior
    • [PATCH v2 5/9] ath10k: remove freq from skb_cb   Michal Kazior
    • [PATCH v2 6/9] ath10k: pack up flags in skb_cb   Michal Kazior
    • [PATCH v2 7/9] ath10k: fix tx header parsing   Michal Kazior
    • [PATCH v2 8/9] ath10k: replace vdev_id and tid in skb cb   Michal Kazior
    • [PATCH v2 9/9] ath10k: store msdu_id instead of txbuf pointers   Michal Kazior
    • [PATCH v2 0/9] ath10k: clean up ath10k_skb_cb   Kalle Valo
      • [PATCH v2 0/9] ath10k: clean up ath10k_skb_cb   Michal Kazior
      • [PATCH v3 0/9] ath10k: clean up ath10k_skb_cb   Michal Kazior
      • [PATCH v3 1/9] ath10k: merge is_protected with nohwcrypt   Michal Kazior
      • [PATCH v3 2/9] ath10k: rename function to adhere to naming convention   Michal Kazior
      • [PATCH v3 3/9] ath10k: remove txmode from skb_cb   Michal Kazior
      • [PATCH v3 4/9] ath10k: remove is_offchan   Michal Kazior
      • [PATCH v3 5/9] ath10k: remove freq from skb_cb   Michal Kazior
      • [PATCH v3 6/9] ath10k: pack up flags in skb_cb   Michal Kazior
      • [PATCH v3 7/9] ath10k: fix tx header parsing   Michal Kazior
      • [PATCH v3 8/9] ath10k: replace vdev_id and tid in skb cb   Michal Kazior
      • [PATCH v3 9/9] ath10k: store msdu_id instead of txbuf pointers   Michal Kazior
      • QCA998X not working at all   Sebastian Gottschall
      • QCA998X not working at all   Ben Greear
      • QCA998X not working at all   Sebastian Gottschall
      • QCA998X not working at all   Ben Greear
      • QCA998X not working at all   Sebastian Gottschall
      • QCA998X not working at all   Sebastian Gottschall
      • QCA998X not working at all   Kalle Valo
      • QCA998X not working at all   Sebastian Gottschall
      • QCA998X not working at all   Ben Greear
      • QCA998X not working at all   Sebastian Gottschall
      • [PATCH v3 0/9] ath10k: clean up ath10k_skb_cb   Kalle Valo
  • [PATCH v2 1/9] ath10k: merge is_protected with nohwcrypt   Michal Kazior
  • [PATCH v2 2/9] ath10k: rename function to adhere to naming convention   Michal Kazior
• [PATCH v2] ath10k: Add support for pktlog in QCA99X0   Vivek Natarajan
  • [PATCH v2] ath10k: Add support for pktlog in QCA99X0   Vivek Natarajan
  • [PATCH v2] ath10k: Add support for pktlog in QCA99X0   Vivek Natarajan
  • [PATCH v2] ath10k: Add support for pktlog in QCA99X0   Vivek Natarajan
  • [PATCH v2] ath10k: Add support for pktlog in QCA99X0   Kalle Valo
• [PATCH] ath10k: fix invalid NSS for 4x4 devices   Rajkumar Manoharan
  • [PATCH] ath10k: fix invalid NSS for 4x4 devices   Ben Greear
  • [PATCH] ath10k: fix invalid NSS for 4x4 devices   Kalle Valo
  • [PATCH] ath10k: fix invalid NSS for 4x4 devices   Kalle Valo
• Crashing with qca988x firmware with ath10k_pc   Thomas Caputi
• IBSS on WLE900VX   Pushpal Sidhu
• QCA6174 seemingly randomly fails to wake   theros at openmailbox.org
  • QCA6174 seemingly randomly fails to wake   Michal Kazior
• [PATCH v2] ath10k: add notice.txt references to WHENCE   Kyle McMartin
• [PATCH] ath10k: Add thermal throttling support for 10.4 firmware.   Raja, Tamizh Chelvam
  • [PATCH] ath10k: Add thermal throttling support for 10.4 firmware.   Kalle Valo
• [PATCH 2/2] ath10k: set peer MFP flag in peer assoc command   Raja, Tamizh Chelvam
  • [PATCH 2/2] ath10k: set peer MFP flag in peer assoc command   Kalle Valo
• [PATCH 0/4] update ath10k support for QCA9377 chips   Bartosz Markowski
• [PATCH 1/4] ath10k: fix the currently supported QCA9377 target version name   Bartosz Markowski
• [PATCH 2/4] ath10k: update missing hw_params of QCA9377 hw1.1   Bartosz Markowski
• [PATCH 3/4] ath10k: introduce dev_id to hw_params   Bartosz Markowski
• [PATCH 4/4] ath10k: add QCA9377 hw1.0 support   Bartosz Markowski
  • [PATCH 4/4] ath10k: add QCA9377 hw1.0 support   Kalle Valo
    • [PATCH 4/4] ath10k: add QCA9377 hw1.0 support   Bartosz Markowski
• [PATCH V2 0/3] Fix few WMI/HTT interfaces   Vasanthakumar Thiagarajan
  • [PATCH V2 1/3] ath10k: Fix peer assoc complete WMI command for 10.4   Vasanthakumar Thiagarajan
  • [PATCH V2 2/3] ath10k: Rename the helper which is used for off-channel tx   Vasanthakumar Thiagarajan
  • [PATCH V2 3/3] ath10k: Fix peerid configuration in htt tx desc for htt version < 3.4   Vasanthakumar Thiagarajan
  • [PATCH V2 0/3] Fix few WMI/HTT interfaces   Kalle Valo
    • [PATCH V2 0/3] Fix few WMI/HTT interfaces   Vasanthakumar Thiagarajan
      • [PATCH V2 0/3] Fix few WMI/HTT interfaces   Kalle Valo
      • [PATCH V2 0/3] Fix few WMI/HTT interfaces   Vasanthakumar Thiagarajan
• [PATCHv2] ath10k: consolidate if statements in ath10k_wmi_event_mgmt_rx   Kalle Valo
• [PATCH 1/2] ath10k: Add abstraction layer for peer flags   Kalle Valo
• [PATCH 0/3] Add new WMI defines to 10.4   Kalle Valo
• [PATCH] ath10k: debugfs file to enable Bluetooth coexistence feature   Kalle Valo
• [PATCH V3 0/3] Fix few WMI/HTT interfaces   Vasanthakumar Thiagarajan
  • [PATCH V3 1/3] ath10k: Fix peer assoc complete WMI command for 10.4   Vasanthakumar Thiagarajan
  • [PATCH V3 2/3] ath10k: Rename the helper which is used for off-channel tx   Vasanthakumar Thiagarajan
  • [PATCH V3 3/3] ath10k: Fix peerid configuration in htt tx desc for htt version < 3.4   Vasanthakumar Thiagarajan
  • [PATCH V3 0/3] Fix few WMI/HTT interfaces   Kalle Valo
• [PATCH v2 0/4] update ath10k support for QCA9377 chips   Bartosz Markowski
  • [PATCH v2 1/4] ath10k: fix the currently supported QCA9377 target version name   Bartosz Markowski
  • [PATCH v2 2/4] ath10k: update missing hw_params of QCA9377 hw1.1   Bartosz Markowski
  • [PATCH v2 3/4] ath10k: introduce dev_id to hw_params   Bartosz Markowski
  • [PATCH v2 4/4] ath10k: add QCA9377 hw1.0 support   Bartosz Markowski
  • [PATCH v2 0/4] update ath10k support for QCA9377 chips   Bartosz Markowski
  • [PATCH v2 0/4] update ath10k support for QCA9377 chips   Kalle Valo
• [PATCH v3] ath10k: Override CE5 configuration for QCA6147 device   Ryan Hsu
  • [PATCH v3] ath10k: Override CE5 configuration for QCA6147 device   Ryan Hsu
    • [PATCH v3] ath10k: Override CE5 configuration for QCA6147 device   Julian Calaby
      • [PATCH v3] ath10k: Override CE5 configuration for QCA6147 device   Kalle Valo
  • [PATCH v3] ath10k: Override CE5 configuration for QCA6147 device   Kalle Valo
• patch "ath10k: drop probe responses when too many are queued" added to staging-testing   Kalle Valo
  • patch "ath10k: drop probe responses when too many are queued" added to staging-testing   Greg KH
• ath10k AP "failed to delete peer" errors when using Nexus 5X   Robert Hancock
  • ath10k AP "failed to delete peer" errors when using Nexus 5X   Ben Greear
    • ath10k AP "failed to delete peer" errors when using Nexus 5X   Robert Hancock
      • ath10k AP "failed to delete peer" errors when using Nexus 5X   Robert Hancock
• Setting 3x3 NIC to 2x2   Ben Greear
• FCC Continuous TX testing   Theodore A. Roth
  • FCC Continuous TX testing   Michael Rex
• [PATCH] ath10k: poll HTT send completion when CE 5 is unused   Rajkumar Manoharan
  • [PATCH] ath10k: poll HTT send completion when CE 5 is unused   Kalle Valo
    • [PATCH] ath10k: poll HTT send completion when CE 5 is unused   Manoharan, Rajkumar
• [PATCH] cfg80211: add VHT support for Mesh   Peter Oh
  • [PATCH] cfg80211: add VHT support for Mesh   Johannes Berg
• [PATCH] ath10k: Enable VHT for Mesh   Peter Oh
  • [PATCH] ath10k: Enable VHT for Mesh   Peter Oh
    • [PATCH] ath10k: Enable VHT for Mesh   kbuild test robot
• [PATCH v2] cfg80211: add VHT support for Mesh   Peter Oh
  • [PATCH v2] cfg80211: add VHT support for Mesh   Johannes Berg
    • [PATCH v2] cfg80211: add VHT support for Mesh   Peter Oh
      • [PATCH v2] cfg80211: add VHT support for Mesh   Johannes Berg
      • [PATCH v2] cfg80211: add VHT support for Mesh   Peter Oh
      • [PATCH v2] cfg80211: add VHT support for Mesh   Johannes Berg
      • [PATCH v2] cfg80211: add VHT support for Mesh   Peter Oh
      • [PATCH v2] cfg80211: add VHT support for Mesh   Johannes Berg
      • [PATCH v2] cfg80211: add VHT support for Mesh   Peter Oh
      • [PATCH v2] cfg80211: add VHT support for Mesh   Johannes Berg
• [PATCH] ath10k: Fix the wrong RX rate idx report at 11G mode   Yanbo Li
  • [PATCH] ath10k: Fix the wrong RX rate idx report at 11G mode   Kalle Valo
• You have received a new fax, document 00437323   Interfax Online
• Matching crc32 checksums from kernel and user space   Kalle Valo
  • Matching crc32 checksums from kernel and user space   Kalle Valo
• [PATCH] ath10k: Adjust the RX packet pad offset at QCA99X0 4addr mode   Kalle Valo
  • [PATCH] ath10k: Adjust the RX packet pad offset at QCA99X0 4addr mode   Mohammed Shafi Shajakhan
    • [PATCH] ath10k: Adjust the RX packet pad offset at QCA99X0 4addr mode   Li, Yanbo
  • [PATCH] ath10k: Adjust the RX packet pad offset at QCA99X0 4addr mode   Kalle Valo
• TX-Power limits for ath10k based card on Linux 3.18.24 (long term support)?   Joerg Pommnitz
  • TX-Power limits for ath10k based card on Linux 3.18.24 (long term support)?   Joerg Pommnitz
    • TX-Power limits for ath10k based card on Linux 3.18.24 (long term support)?   Ben Greear
• TX-Power limits for ath10k based card on Linux 3.18.24 (offlist)   Joerg Pommnitz
  • TX-Power limits for ath10k based card on Linux 3.18.24 (offlist)   Ben Greear
• QCA6174 hw2.1 Firmware crash when connecting to a 5GHz network   Roman Bange
  • QCA6174 hw2.1 Firmware crash when connecting to a 5GHz network   Bartosz Markowski
    • QCA6174 hw2.1 Firmware crash when connecting to a 5GHz network   Roman Bange
• Error while loading firmware   Pratik Singhal
  • Error while loading firmware   Michal Kazior
• Yesterdays kernel/git/kvalo/ath.git failes with COMPEX WLE600VX   Joerg Pommnitz
  • Yesterdays kernel/git/kvalo/ath.git failes with COMPEX WLE600VX   Kalle Valo
    • Yesterdays kernel/git/kvalo/ath.git failes with COMPEX WLE600VX   Joerg Pommnitz
      • Yesterdays kernel/git/kvalo/ath.git failes with COMPEX WLE600VX   Kalle Valo
    • Yesterdays kernel/git/kvalo/ath.git failes with COMPEX WLE600VX   Joerg Pommnitz
• [PATCH] ath10k: fix board data fetch error message   Peter Oh
  • [PATCH] ath10k: fix board data fetch error message   Kalle Valo
• [PATCH] ath10k: Enable AP + STA interface combination support for 10.x   Mohammed Shafi Shajakhan
  • [PATCH] ath10k: Enable AP + STA interface combination support for 10.x   Kalle Valo
• [PATCH 1/2] ath10k: do not use coherent memory for allocated device memory chunks   Felix Fietkau
  • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Felix Fietkau
    • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Peter Oh
      • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Sebastian Gottschall
      • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Peter Oh
      • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Felix Fietkau
      • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Felix Fietkau
      • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Peter Oh
      • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Felix Fietkau
      • [PATCH 2/2] ath10k: do not use coherent memory for tx buffers   Kalle Valo
  • [PATCH 1/2] ath10k: do not use coherent memory for allocated device memory chunks   Kalle Valo
• [PATCH] ath10k: stop abusing GFP_DMA   Felix Fietkau
  • [PATCH] ath10k: stop abusing GFP_DMA   Kalle Valo
• kvalo firmware confusion   Joerg Pommnitz
  • kvalo firmware confusion   Kalle Valo
    • kvalo firmware confusion   Joerg Pommnitz
      • kvalo firmware confusion   Kalle Valo
      • kvalo firmware confusion   Joerg Pommnitz
      • kvalo firmware confusion   Kalle Valo
    • kvalo firmware confusion   Joerg Pommnitz
• [PATCH v2] ath10k: Fix write permission on few debugfs files   Mohammed Shafi Shajakhan
  • [PATCH v2] ath10k: Fix write permission on few debugfs files   Kalle Valo
• [PATCH 0/3] ath10k: introduce Mesh support in native WiFi mode for QCA988X   Peter Oh
  • [PATCH 1/3] ath10k: update WMI 10.x service map   Peter Oh
    • [PATCH 1/3] ath10k: update WMI 10.x service map   kbuild test robot
    • [PATCH 1/3] ath10k: update WMI 10.x service map   kbuild test robot
      • [PATCH 1/3] ath10k: update WMI 10.x service map   Peter Oh
      • [PATCH 1/3] ath10k: update WMI 10.x service map   Kalle Valo
  • [PATCH 2/3] ath10k: introduce new subtypes for proxy STA and Mesh   Peter Oh
  • [PATCH 3/3] ath10k: apply Mesh subtype when Mesh interface created.   Peter Oh
    • [PATCH 3/3] ath10k: apply Mesh subtype when Mesh interface created.   kbuild test robot
    • [PATCH 3/3] ath10k: apply Mesh subtype when Mesh interface created.   kbuild test robot
  • [PATCH 0/3] ath10k: introduce Mesh support in native WiFi mode for QCA988X   Kalle Valo
• ATH10 firmware question   Cedric VONCKEN
  • ATH10 firmware question   Ben Greear
    • ATH10 firmware question   Michal Kazior
      • ATH10 firmware question   Ben Greear
      • ATH10 firmware question   voncken
• ath.git master branch rebased to 4.4-rc1-wl-ath   Kalle Valo
• [PATCH 0/6] ath10k: print crc32 checksum   Kalle Valo
  • [PATCH 1/6] ath10k: fix otp board id error message   Kalle Valo
    • [PATCH 1/6] ath10k: fix otp board id error message   Sebastian Gottschall
  • [PATCH 2/6] ath10k: reorganise hardware and firmware info messages   Kalle Valo
  • [PATCH 3/6] ath10k: always show bmi chip ids and subdevice ids   Kalle Valo
  • [PATCH 4/6] ath10k: split driver info messages during device initialisation   Kalle Valo
  • [PATCH 5/6] ath10k: print crc32 checksums for firmware and board files   Kalle Valo
  • [PATCH 6/6] ath10k: implement fw_checksums debugfs file   Kalle Valo
  • [PATCH 0/6] ath10k: print crc32 checksum   Kalle Valo
• adding QCA6174 chipset support to 3.10 kernel   bartlomiej.grzeskowiak
  • adding QCA6174 chipset support to 3.10 kernel   Michal Kazior
• drivers/net/wireless/ath/ath10k/testmode.c: How does one use it?   Joerg Pommnitz
• [PATCH] ath10k: Fix check for !THERMAL case   Mark Brown
  • [PATCH] ath10k: Fix check for !THERMAL case   kbuild test robot
• next-20151126 build: 3 failures 15 warnings (next-20151126)   Mark Brown
  • next-20151126 build: 3 failures 15 warnings (next-20151126)   Kalle Valo
    • next-20151126 build: 3 failures 15 warnings (next-20151126)   Mark Brown
      • next-20151126 build: 3 failures 15 warnings (next-20151126)   Kalle Valo
      • next-20151126 build: 3 failures 15 warnings (next-20151126)   Mark Brown
      • next-20151126 build: 3 failures 15 warnings (next-20151126)   Kalle Valo
      • next-20151126 build: 3 failures 15 warnings (next-20151126)   Mark Brown
• [PATCH] ath10: Fix build with CONFIG_THERMAL=m   Michal Marek
  • [PATCH] ath10: Fix build with CONFIG_THERMAL=m   Michal Marek
  • [PATCH] ath10: Fix build with CONFIG_THERMAL=m   Kalle Valo
• [PATCH] ath10k: deliver mgmt frames from htt to monitor vifs only   Grzegorz Bajorski
  • [PATCH] ath10k: deliver mgmt frames from htt to monitor vifs only   kbuild test robot
  • [PATCH] ath10k: deliver mgmt frames from htt to monitor vifs only   Peter Oh
• [PATCH] ath10k: Remove unnecessary amsdu/ampdu assignment in debugfs   Mohammed Shafi Shajakhan
• [PATCH v2] ath10k: do not use coherent memory for allocated device memory chunks   Felix Fietkau

Last message date: Mon Nov 30 11:44:53 PST 2015
Archived on: Mon Nov 30 11:47:30 PST 2015

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...