QCA998X not working at all

[Sebastian Gottschall]

Am 19.11.2015 um 16:33 schrieb Ben Greear:
> On 11/19/2015 07:10 AM, Sebastian Gottschall wrote:
>>   6.064984] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
>> [    6.065432] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0 
>> irq_mode 0 reset_mode 0
>> [    8.448583] ath10k_pci 0000:01:00.0: unable to read from the device
>> [    8.448614] ath10k_pci 0000:01:00.0: could not execute otp for 
>> board id check: -110
>> [    8.453657] ath10k_pci 0000:01:00.0: failed to get board id from 
>> otp for qca99x0: -110
>> [    8.461352] ath10k_pci 0000:01:00.0: could not probe fw (-110)
>>
>>
>> it seems that the there is some sort of problem with the otp. 
>> unfortunatly ath10k gives also no usefull information about the reason.
>> this is a embedded ap148 based device (ipq8064) with QCA998X chipsets 
>> on it
>
> What kernel, what firmware, what board.bin are you using?
plain ath10k with kernel 3.18.23. standard firmware-5 from ath10k 
github, same for board.
>
> Thanks,
> Ben
>
>