[PATCH 2/2] ath10k: Fix peerid configuration in htt tx desc for htt version < 3.4
Vasanthakumar Thiagarajan
vthiagar at qti.qualcomm.com
Mon Nov 2 00:33:49 PST 2015
Of a word in struct htt_data_tx_desc htt version >= 3.4 firmware uses LSB 16-bit
for frequency configuration which is used for offchannel tx and MSB 16-bit
is for peerid. But other firmwares using version 2.X (10.1, 10.2.2, 10.2.4
and 10.4) are using 32-bit for peerid in htt tx desc. So far no issue is found
with the existing code setting peerid and freq for HTT version 2.X, this could
be mainly because of 0 as frequecy (home channel) is being always passed with
those firmwares. There may be issues when non-zero freq is passed with firmware
using < 3.4 htt version. To be safe use target_version_major and target_version_minor
along with htt-op-version before configuring peer id and freq in htt tx desc.
Fixes: 8d6d36243610 ("ath10k: fix offchan reliability")
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar at qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/htt.h | 9 +++++++--
drivers/net/wireless/ath/ath10k/htt_tx.c | 13 +++++++++++--
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 2bad50e..44fb4f2 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -166,8 +166,13 @@ struct htt_data_tx_desc {
__le16 len;
__le16 id;
__le32 frags_paddr;
- __le16 peerid;
- __le16 freq;
+ union {
+ __le32 peerid;
+ struct {
+ __le16 peerid;
+ __le16 freq;
+ } __packed offchan_tx;
+ } __packed;
u8 prefetch[0]; /* start of frame, for FW classification engine */
} __packed;
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 1682397..bf19247 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -681,8 +681,17 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
skb_cb->htt.txbuf->cmd_tx.len = __cpu_to_le16(msdu->len);
skb_cb->htt.txbuf->cmd_tx.id = __cpu_to_le16(msdu_id);
skb_cb->htt.txbuf->cmd_tx.frags_paddr = __cpu_to_le32(frags_paddr);
- skb_cb->htt.txbuf->cmd_tx.peerid = __cpu_to_le16(HTT_INVALID_PEERID);
- skb_cb->htt.txbuf->cmd_tx.freq = __cpu_to_le16(skb_cb->htt.freq);
+ if (ar->htt.target_version_major >= 3 &&
+ ar->htt.target_version_minor >= 4 &&
+ ar->htt.op_version == ATH10K_FW_HTT_OP_VERSION_TLV) {
+ skb_cb->htt.txbuf->cmd_tx.offchan_tx.peerid =
+ __cpu_to_le16(HTT_INVALID_PEERID);
+ skb_cb->htt.txbuf->cmd_tx.offchan_tx.freq =
+ __cpu_to_le16(skb_cb->htt.freq);
+ } else {
+ skb_cb->htt.txbuf->cmd_tx.peerid =
+ __cpu_to_le32(HTT_INVALID_PEERID);
+ }
trace_ath10k_htt_tx(ar, msdu_id, msdu->len, vdev_id, tid);
ath10k_dbg(ar, ATH10K_DBG_HTT,
--
1.9.1
More information about the ath10k
mailing list