QCA998X not working at all

Sebastian Gottschall s.gottschall at dd-wrt.com
Thu Nov 19 10:21:01 PST 2015


simple solution.

as for ath9k. otp must be ignored for various chipsets, since they wont 
return valid results

--- core.c (Revision 2702)
+++ core.c (Arbeitskopie)
@@ -1735,9 +1735,8 @@

   ret = ath10k_core_get_board_id_from_otp(ar);
   if (ret && ret != -EOPNOTSUPP) {
-  ath10k_err(ar, "failed to get board id from otp for qca99x0: %d\n",
+  ath10k_err(ar, "failed to get board id from otp for qca99x0: %d, 
ignore\n",
          ret);
-  return ret;
   }

   ret = ath10k_core_fetch_board_file(ar);



Am 19.11.2015 um 18:12 schrieb Sebastian Gottschall:
> Am 19.11.2015 um 17:13 schrieb Ben Greear:
>>
>> git clone git://dmz2.candelatech.com/linux.ath
> same effect with yours
>
>     6.201141] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
> [    6.201593] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0 
> irq_mode 0 reset_mode 0
> [    8.578573] ath10k_pci 0000:01:00.0: unable to read from the device
> [    8.578605] ath10k_pci 0000:01:00.0: could not execute otp for 
> board id check: -110
> [    8.583648] ath10k_pci 0000:01:00.0: failed to get board id from 
> otp for qca99x0: -110
> [    8.591338] ath10k_pci 0000:01:00.0: could not probe fw (-110)
> [    8.600062] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
> [    8.605600] ath10k_pci 0001:01:00.0: pci irq legacy interrupts 0 
> irq_mode 0 reset_mode 0
> [   10.798574] ath10k_pci 0001:01:00.0: unable to read from the device
> [   10.798598] ath10k_pci 0001:01:00.0: could not execute otp for 
> board id check: -110
> [   10.803644] ath10k_pci 0001:01:00.0: failed to get board id from 
> otp for qca99x0: -110
> [   10.811346] ath10k_pci 0001:01:00.0: could not probe fw (-110)
>
>
> _______________________________________________
> ath10k mailing list
> ath10k at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
>




More information about the ath10k mailing list