[PATCH v2 2/4] ath10k: update missing hw_params of QCA9377 hw1.1

Bartosz Markowski bartosz.markowski at tieto.com
Thu Nov 5 00:50:41 PST 2015


The uart_pin was incorrectly configured for QCA9377
and the recently added hw_params were omitted.

Signed-off-by: Bartosz Markowski <bartosz.markowski at tieto.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 11e42720035b..345770f1625a 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -141,8 +141,10 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.id = QCA9377_HW_1_1_DEV_VERSION,
 		.name = "qca9377 hw1.1",
 		.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
-		.uart_pin = 7,
+		.uart_pin = 6,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
 		.fw = {
 			.dir = QCA9377_HW_1_0_FW_DIR,
 			.fw = QCA9377_HW_1_0_FW_FILE,
-- 
2.1.2




More information about the ath10k mailing list