September 2013 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Sep 1 02:15:06 EDT 2013
Ending: Mon Sep 30 15:10:30 EDT 2013
Messages: 219

• Crash when loading module   Kalle Valo
• [PATCH 3/7] ath10k: remove void pointer from struct ath10k_pci_compl   Kalle Valo
• [PATCH v2 1/6] ath10k: use inline ce_state structure   Kalle Valo
• [PATCH v2 0/6] ath10k: CE cleanups   Kalle Valo
• [PATCH] ath10k: remove un ar_pci->cacheline_sz field   Kalle Valo
• [PATCH v2 0/7] ath10k: pci cleanup   Kalle Valo
• [PATCH v2 1/7] ath10k: pci: make host_ce_config_wlan[] more readable   Kalle Valo
• [PATCH v2 2/7] ath10k: make target_ce_config_wlan more readable   Kalle Valo
• [PATCH v2 3/7] ath10k: remove void pointer from struct ath10k_pci_compl   Kalle Valo
• [PATCH v2 4/7] ath10k: convert ath10k_pci_reg_read/write32() to take struct ath10k   Kalle Valo
• [PATCH v2 5/7] ath10k: clean up ath10k_ce_completed_send_next_nolock()   Kalle Valo
• [PATCH v2 6/7] ath10k: convert ath10k_pci_wake() to return   Kalle Valo
• [PATCH v2 7/7] ath10k: simplify ath10k_ce_init() wake up handling   Kalle Valo
• [PATCH v2 0/2] ath10k: detect hw1.0 boards   Kalle Valo
• [PATCH v2 1/2] ath10k: check chip id from the soc register during probe   Kalle Valo
• [PATCH v2 2/2] ath10k: add chip_id file to debugfs   Kalle Valo
• [PATCH v2 1/2] ath10k: check chip id from the soc register during probe   Christian Lamparter
• [PATCH v2 1/2] ath10k: check chip id from the soc register during probe   Kalle Valo
• [PATCH v2 0/6] ath10k: CE cleanups   Michal Kazior
• [PATCH v2 1/2] ath10k: check chip id from the soc register during probe   Zaki
• [PATCH v2 1/2] ath10k: check chip id from the soc register during probe   Kalle Valo
• [PATCH v2 0/7] ath10k: pci cleanup   Kalle Valo
• [PATCH v2 0/2] ath10k: detect hw1.0 boards   Kalle Valo
• [PATCH v3 1/2] ath10k: update wal_dbg_tx_stats structure with missing parameter.   Kalle Valo
• [PATCH v3 2/2] ath10k: implement per-VDEV FW statistics   Kalle Valo
• Pull request: ath 20130930   Kalle Valo
• [PATCH v4 0/2] add per-VDEV FW statistics   Bartosz Markowski
• [PATCH v4 1/2] ath10k: update wal_dbg_tx_stats structure with missing parameter.   Bartosz Markowski
• [PATCH v4 2/2] ath10k: implement per-VDEV FW statistics   Bartosz Markowski
• Pull request: ath 20130930   Kalle Valo
• [PATCH 0/3] ath10k: HTT stats   Kalle Valo
• [PATCH 1/3] ath10k: add trace event ath10k_htt_stats   Kalle Valo
• [PATCH 2/3] ath10k: implement ath10k_debug_start/stop()   Kalle Valo
• [PATCH 3/3] ath10k: add htt_stats_enable debugfs file   Kalle Valo
• [PATCH 1/2] ath10k: set the UART baud rate to 19200   Bartosz Markowski
• [PATCH 2/2] ath10k: remove obsolete INIT STATUS definitions   Bartosz Markowski
• [PATCH] ath10k: prevent CE from looping indefinitely   Michal Kazior
• [PATCH] Add missing braces to ath10k_pci_tx_pipe_cleanup   Dave Jones
• [OpenWrt-Devel] [PATCH] ath10k: enable Atheros 802.11ac driver   Hauke Mehrtens
• [PATCH] Add missing braces to ath10k_pci_tx_pipe_cleanup   Kalle Valo
• [PATCH 0/3] ath10k: HTT stats   Kalle Valo
• [PATCH v4 2/2] ath10k: implement per-VDEV FW statistics   Kalle Valo
• [PATCH 1/2] ath10k: set the UART baud rate to 19200   Kalle Valo
• [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup   Kalle Valo
• [PATCH 1/8] ath10k: add BMI log level   Kalle Valo
• [PATCH 2/8] ath10k: rename ATH10K_DBG_CORE to BOOT   Kalle Valo
• [PATCH 3/8] ath10k: cleanup debug messages in core.c   Kalle Valo
• [PATCH 4/8] ath10k: add boot debug messages to pci.c and ce.c   Kalle Valo
• [PATCH 5/8] ath10k: add boot debug messages to htc.c   Kalle Valo
• [PATCH 6/8] ath10k: add boot messages to htt.c   Kalle Valo
• [PATCH 7/8] ath10k: clean mac.c debug messages   Kalle Valo
• [PATCH 8/8] ath10k: print phymode as a string   Kalle Valo
• [PATCH] ath10k: Calculate correct peer PHY mode for VHT   Kalle Valo
• [PATCH] ath10k: delete struct ce_sendlist   Kalle Valo
• [PATCH] ath10k: prevent CE from looping indefinitely   Kalle Valo
• [PATCH] ath10k: define ath10k_debug_start/_stop as static inline   Bartosz Markowski
• [PATCH] ath10k: define ath10k_debug_start/_stop as static inline   Kalle Valo
• [PATCH 06/12] wireless: ath10k: remove unnecessary pci_set_drvdata()   Jingoo Han
• [PATCH 0/7] ath10k: improve TX path   Michal Kazior
• [PATCH 1/7] ath10k: simplify HTC credits calculation   Michal Kazior
• [PATCH 2/7] ath10k: add HTC TX credits replenishing notification   Michal Kazior
• [PATCH 3/7] ath10k: make WMI commands block by design   Michal Kazior
• [PATCH 4/7] ath10k: simplify HTC command submitting   Michal Kazior
• [PATCH 5/7] ath10k: improve beacon submission latency   Michal Kazior
• [PATCH 6/7] ath10k: remove wmi pending count limit   Michal Kazior
• [PATCH 7/7] ath10k: remove wmi event worker thread   Michal Kazior
• [PATCH 1/7] ath10k: simplify HTC credits calculation   Bob Copeland
• [PATCH 06/12] wireless: ath10k: remove unnecessary pci_set_drvdata()   Kalle Valo
• [PATCH 06/12] wireless: ath10k: remove unnecessary pci_set_drvdata()   Jingoo Han
• [PATCH 1/7] ath10k: simplify HTC credits calculation   Michal Kazior
• [PATCH 0/8] ath10k: boot, bmi and mac debug message cleanup   Kalle Valo
• [PATCH] ath10k: Calculate correct peer PHY mode for VHT   Kalle Valo
• [PATCH] ath10k: delete struct ce_sendlist   Kalle Valo
• [PATCH 06/12] wireless: ath10k: remove unnecessary pci_set_drvdata()   Kalle Valo
• [PATCH 5/7] ath10k: improve beacon submission latency   Kalle Valo
• [PATCH 0/7] ath10k: improve TX path   Kalle Valo
• [PATCHv2 0/7] ath10k: improve TX path   Michal Kazior
• [PATCHv2 1/7] ath10k: simplify HTC credits calculation   Michal Kazior
• [PATCHv2 2/7] ath10k: add HTC TX credits replenishing notification   Michal Kazior
• [PATCHv2 3/7] ath10k: make WMI commands block by design   Michal Kazior
• [PATCHv2 4/7] ath10k: simplify HTC command submitting   Michal Kazior
• [PATCHv2 5/7] ath10k: improve beacon submission latency   Michal Kazior
• [PATCHv2 6/7] ath10k: remove wmi pending count limit   Michal Kazior
• [PATCHv2 7/7] ath10k: remove wmi event worker thread   Michal Kazior
• [RFC 0/4] ath10k: improve RX performance   Michal Kazior
• [RFC 1/4] ath10k: report A-MSDU subframes individually   Michal Kazior
• [RFC 2/4] ath10k: document decap modes   Michal Kazior
• [RFC 3/4] ath10k: cleanup RX decap handling   Michal Kazior
• [RFC 4/4] ath10k: align RX frames properly   Michal Kazior
• [PATCHv2 0/7] ath10k: improve TX path   Kalle Valo
• [RFC 3/4] ath10k: cleanup RX decap handling   Kalle Valo
• [RFC 3/4] ath10k: cleanup RX decap handling   Michal Kazior
• [PATCH] ath10k: implement host memory chunks feature   Bartosz Markowski
• [PATCH] ath10k: implement host memory chunks feature   Michal Kazior
• [PATCH] ath10k: implement host memory chunks feature   Bartosz Markowski
• [PATCH 0/5] ath10k: tx performance patches   Michal Kazior
• [PATCH 1/5] ath10k: use num_pending_tx instead of msdu id bitmap   Michal Kazior
• [PATCH 2/5] ath10k: avoid needless memset on TX path   Michal Kazior
• [PATCH 3/5] ath10k: decouple HTT TX completions   Michal Kazior
• [PATCH 4/5] ath10k: cleanup HTT TX functions   Michal Kazior
• [PATCH 5/5] ath10k: use msdu headroom to store txfrag   Michal Kazior
• [PATCH] ath10k: implement host memory chunks feature   Michal Kazior
• [RFC] ath10k: replenish HTT RX buffers in a tasklet   Michal Kazior
• [PATCH] ath10k: fix num_sends_allowed replenishing   Michal Kazior
• [PATCH] ath10k: fix tracing of ath10k_wmi_cmd   Michal Kazior
• [PATCH] ath10k: fix tracing of ath10k_wmi_cmd   Kalle Valo
• [PATCH] ath10k: fix num_sends_allowed replenishing   Kalle Valo
• [PATCH 0/5] ath10k: tx performance patches   Kalle Valo
• [RFC] ath10k: replenish HTT RX buffers in a tasklet   Kalle Valo
• [RFC 0/4] ath10k: improve RX performance   Kalle Valo
• [RFC 3/4] ath10k: cleanup RX decap handling   Kalle Valo
• [RFC] ath10k: replenish HTT RX buffers in a tasklet   Michal Kazior
• [RFC] ath10k: replenish HTT RX buffers in a tasklet   Kalle Valo
• [RFC 0/4] ath10k: improve RX performance   Michal Kazior
• [RFC 0/4] ath10k: improve RX performance   Kalle Valo
• Pull request: ath 20130930   Kalle Valo
• [PATCH] ath10k: replenish HTT RX buffers in a tasklet   Michal Kazior
• [PATCH] ath10k: make monitor vdev down before stoping it   Marek Puzyniak
• [PATCH 0/5] ath10k: improve RX performance   Michal Kazior
• [PATCH 1/5] ath10k: report A-MSDU subframes individually   Michal Kazior
• [PATCH 2/5] ath10k: document decap modes   Michal Kazior
• [PATCH 3/5] ath10k: cleanup RX decap handling   Michal Kazior
• [PATCH 4/5] ath10k: fix Native Wifi decap mode RX   Michal Kazior
• [PATCH 5/5] ath10k: align RX frames properly   Michal Kazior
• [PATCH 00/13] ath10k: dual-firmware support (MAIN and 10.X)   Bartosz Markowski
• [PATCH 01/13] ath10k: introduce dynamic WMI structures   Bartosz Markowski
• [PATCH 02/13] ath10k: add wmi_10x_<cmd/event> definitions   Bartosz Markowski
• [PATCH 03/13] ath10k: warn if give WMI command is not supported   Bartosz Markowski
• [PATCH 04/13] ath10k: implement WMI events handling frame for both firmwares   Bartosz Markowski
• [PATCH 05/13] ath10k: split ath10k_wmi_service_ready_event_rx   Bartosz Markowski
• [PATCH 06/13] ath10k: drop the fw versioning sanity check   Bartosz Markowski
• [PATCH 07/13] ath10k: implement host memory chunks   Bartosz Markowski
• [PATCH 08/13] ath10k: bring back the WMI path for mgmt frames   Bartosz Markowski
• [PATCH 09/13] ath10k: split wmi_cmd_init path   Bartosz Markowski
• [PATCH 10/13] ath10k: add TARGET values for 10.x firmware   Bartosz Markowski
• [PATCH 11/13] ath10k: introduce dynamic vdev parameters   Bartosz Markowski
• [PATCH 12/13] ath10k: introduce dynamic pdev parameters   Bartosz Markowski
• [PATCH 13/13] ath10k: handle FW API differences for scan structures   Bartosz Markowski
• [PATCH 01/13] ath10k: introduce dynamic WMI structures   Michal Kazior
• [PATCH 11/13] ath10k: introduce dynamic vdev parameters   Michal Kazior
• [PATCH 12/13] ath10k: introduce dynamic pdev parameters   Michal Kazior
• [PATCH 08/13] ath10k: bring back the WMI path for mgmt frames   Michal Kazior
• [PATCH 00/11 - GIT PULL] drivers: net: Last block of Remove extern from function prototypes   Joe Perches
• [PATCH 04/11] ath: Remove extern from function prototypes   Joe Perches
• [PATCH 0/3] ath10k: implement FW IE support   Kalle Valo
• [PATCH 1/3] ath10k: rename board_data in struct ath10k   Kalle Valo
• [PATCH 2/3] ath10k: store separate pointers for firmware data   Kalle Valo
• [PATCH 3/3] ath10k: implement firmware IE container support   Kalle Valo
• [PATCH 3/3] ath10k: implement firmware IE container support   Michal Kazior
• [PATCH 3/3] ath10k: implement firmware IE container support   Kalle Valo
• [PATCH 3/3] ath10k: implement firmware IE container support   Michal Kazior
• [PATCH 3/3] ath10k: implement firmware IE container support   Kalle Valo
• [PATCH 0/5] ath10k: improve RX performance   Kalle Valo
• [PATCH 04/11] ath: Remove extern from function prototypes   Kalle Valo
• [PATCH 0/5] ath10k: improve RX performance   Michal Kazior
• [PATCH 01/13] ath10k: introduce dynamic WMI structures   Kalle Valo
• [PATCH 09/13] ath10k: split wmi_cmd_init path   Kalle Valo
• [PATCH 01/13] ath10k: introduce dynamic WMI structures   Kalle Valo
• [PATCH 01/13] ath10k: introduce dynamic WMI structures   Michal Kazior
• [PATCH 07/13] ath10k: implement host memory chunks   Kalle Valo
• [PATCH 01/13] ath10k: introduce dynamic WMI structures   Kalle Valo
• [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X)   Bartosz Markowski
• [PATCH v2 01/13] ath10k: introduce dynamic WMI structures   Bartosz Markowski
• [PATCH v2 02/13] ath10k: add wmi_10x_<cmd/event> definitions   Bartosz Markowski
• [PATCH v2 03/13] ath10k: warn if give WMI command is not supported   Bartosz Markowski
• [PATCH v2 04/13] ath10k: implement WMI events handling frame for both firmwares   Bartosz Markowski
• [PATCH v2 05/13] ath10k: split ath10k_wmi_service_ready_event_rx   Bartosz Markowski
• [PATCH v2 06/13] ath10k: drop the fw versioning sanity check   Bartosz Markowski
• [PATCH v2 07/13] ath10k: implement host memory chunks   Bartosz Markowski
• [PATCH v2 08/13] ath10k: bring back the WMI path for mgmt frames   Bartosz Markowski
• [PATCH v2 09/13] ath10k: split wmi_cmd_init path   Bartosz Markowski
• [PATCH v2 10/13] ath10k: add TARGET values for 10.x firmware   Bartosz Markowski
• [PATCH v2 11/13] ath10k: introduce dynamic vdev parameters   Bartosz Markowski
• [PATCH v2 12/13] ath10k: introduce dynamic pdev parameters   Bartosz Markowski
• [PATCH v2 13/13] ath10k: handle FW API differences for scan structures   Bartosz Markowski
• [PATCH v2 03/13] ath10k: warn if give WMI command is not supported   Kalle Valo
• [PATCH v2 05/13] ath10k: split ath10k_wmi_service_ready_event_rx   Kalle Valo
• [PATCH v2 00/13] ath10k: dual-firmware support (MAIN and 10.X)   Kalle Valo
• [PATCH] ath10k: replenish HTT RX buffers in a tasklet   Kalle Valo
• [PATCH] ath10k: make monitor vdev down before stoping it   Kalle Valo
• [PATCH v3 00/13] ath10k: dual-firmware support (MAIN and 10.X)   Bartosz Markowski
• [PATCH v3 01/13] ath10k: introduce dynamic WMI structures   Bartosz Markowski
• [PATCH v3 02/13] ath10k: add wmi_10x_<cmd/event> definitions   Bartosz Markowski
• [PATCH v3 03/13] ath10k: warn if give WMI command is not supported   Bartosz Markowski
• [PATCH v3 04/13] ath10k: implement WMI events handling frame for both firmwares   Bartosz Markowski
• [PATCH v3 05/13] ath10k: split ath10k_wmi_service_ready_event_rx   Bartosz Markowski
• [PATCH v3 06/13] ath10k: drop the fw versioning sanity check   Bartosz Markowski
• [PATCH v3 07/13] ath10k: implement host memory chunks   Bartosz Markowski
• [PATCH v3 08/13] ath10k: bring back the WMI path for mgmt frames   Bartosz Markowski
• [PATCH v3 09/13] ath10k: split wmi_cmd_init path   Bartosz Markowski
• [PATCH v3 10/13] ath10k: add TARGET values for 10.x firmware   Bartosz Markowski
• [PATCH v3 11/13] ath10k: introduce dynamic vdev parameters   Bartosz Markowski
• [PATCH v3 12/13] ath10k: introduce dynamic pdev parameters   Bartosz Markowski
• [PATCH v3 13/13] ath10k: handle FW API differences for scan structures   Bartosz Markowski
• [PATCH 00/11 - GIT PULL] drivers: net: Last block of Remove extern from function prototypes   David Miller
• [PATCH 00/11 - GIT PULL] drivers: net: Last block of Remove extern from function prototypes   Joe Perches
• Pull request: ath 20130930   John W. Linville
• [PATCH 00/11 - GIT PULL] drivers: net: Last block of Remove extern from function prototypes   David Miller
• [PATCH v3 00/13] ath10k: dual-firmware support (MAIN and 10.X)   Kalle Valo
• [PATCH v2 0/3] ath10k: implement FW IE support   Kalle Valo
• [PATCH v2 1/3] ath10k: rename board_data in struct ath10k   Kalle Valo
• [PATCH v2 2/3] ath10k: store separate pointers for firmware data   Kalle Valo
• [PATCH v2 3/3] ath10k: implement firmware IE container support   Kalle Valo
• [PATCH 0/2] ath10k: fixes   Michal Kazior
• [PATCH 1/2] ath10k: Fix bug in max. VHT A-MPDU size   Michal Kazior
• [PATCH 2/2] ath10k: fix scheduling while atomic bug   Michal Kazior
• [PATCH 0/4] ath10k: clean ups   Michal Kazior
• [PATCH 1/4] ath10k: split tid calculation from tx function   Michal Kazior
• [PATCH 2/4] ath10k: split vdev_id calculation from tx function   Michal Kazior
• [PATCH 3/4] ath10k: remove ce_sendlist_send   Michal Kazior
• [PATCH 4/4] ath10k: remove num_sends_allowed   Michal Kazior
• [PATCH v2 0/3] ath10k: implement FW IE support   Kalle Valo
• [PATCH v3 0/3] ath10k: implement FW IE support   Kalle Valo
• [PATCH v3 1/3] ath10k: rename board_data in struct ath10k   Kalle Valo
• [PATCH v3 2/3] ath10k: store separate pointers for firmware data   Kalle Valo
• [PATCH v3 3/3] ath10k: implement firmware IE container support   Kalle Valo
• [PATCH v3 0/3] ath10k: implement FW IE support   Kalle Valo
• [PATCH 1/4] ath10k: split tid calculation from tx function   Kalle Valo
• [PATCH 2/4] ath10k: split vdev_id calculation from tx function   Kalle Valo

Last message date: Mon Sep 30 15:10:30 EDT 2013
Archived on: Mon Sep 30 15:10:58 EDT 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...