[PATCHv2 6/7] ath10k: remove wmi pending count limit
Michal Kazior
michal.kazior at tieto.com
Fri Sep 13 08:16:57 EDT 2013
It is no longer used nor necessary since WMI
commands can block.
Signed-off-by: Michal Kazior <michal.kazior at tieto.com>
---
drivers/net/wireless/ath/ath10k/core.h | 2 --
drivers/net/wireless/ath/ath10k/mac.c | 9 ---------
drivers/net/wireless/ath/ath10k/wmi.c | 32 --------------------------------
drivers/net/wireless/ath/ath10k/wmi.h | 2 --
4 files changed, 45 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 14b7d3d..c2b6a76 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -112,8 +112,6 @@ struct ath10k_wmi {
enum ath10k_htc_ep_id eid;
struct completion service_ready;
struct completion unified_ready;
- atomic_t pending_tx_count;
- wait_queue_head_t wq;
wait_queue_head_t tx_credits_wq;
struct sk_buff_head wmi_event_list;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 6c3e9d1..11aa13e 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1224,8 +1224,6 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
/* FIXME: why don't we print error if wmi call fails? */
ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
- ath10k_wmi_flush_tx(ar);
-
arvif->def_wep_key_index = 0;
}
@@ -1664,8 +1662,6 @@ static int ath10k_abort_scan(struct ath10k *ar)
return -EIO;
}
- ath10k_wmi_flush_tx(ar);
-
ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ);
if (ret == 0)
ath10k_warn("timed out while waiting for scan to stop\n");
@@ -1699,10 +1695,6 @@ static int ath10k_start_scan(struct ath10k *ar,
if (ret)
return ret;
- /* make sure we submit the command so the completion
- * timeout makes sense */
- ath10k_wmi_flush_tx(ar);
-
ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ);
if (ret == 0) {
ath10k_abort_scan(ar);
@@ -1924,7 +1916,6 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
ret = ath10k_monitor_destroy(ar);
}
- ath10k_wmi_flush_tx(ar);
mutex_unlock(&ar->conf_mutex);
return ret;
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 9152dae..b29d2b9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -23,30 +23,6 @@
#include "wmi.h"
#include "mac.h"
-void ath10k_wmi_flush_tx(struct ath10k *ar)
-{
- int ret;
-
- lockdep_assert_held(&ar->conf_mutex);
-
- if (ar->state == ATH10K_STATE_WEDGED) {
- ath10k_warn("wmi flush skipped - device is wedged anyway\n");
- return;
- }
-
- ret = wait_event_timeout(ar->wmi.wq,
- atomic_read(&ar->wmi.pending_tx_count) == 0,
- 5*HZ);
- if (atomic_read(&ar->wmi.pending_tx_count) == 0)
- return;
-
- if (ret == 0)
- ret = -ETIMEDOUT;
-
- if (ret < 0)
- ath10k_warn("wmi flush failed (%d)\n", ret);
-}
-
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
int ret;
@@ -85,9 +61,6 @@ static struct sk_buff *ath10k_wmi_alloc_skb(u32 len)
static void ath10k_wmi_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
{
dev_kfree_skb(skb);
-
- if (atomic_sub_return(1, &ar->wmi.pending_tx_count) == 0)
- wake_up(&ar->wmi.wq);
}
static int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
@@ -1243,7 +1216,6 @@ int ath10k_wmi_attach(struct ath10k *ar)
{
init_completion(&ar->wmi.service_ready);
init_completion(&ar->wmi.unified_ready);
- init_waitqueue_head(&ar->wmi.wq);
init_waitqueue_head(&ar->wmi.tx_credits_wq);
skb_queue_head_init(&ar->wmi.wmi_event_list);
@@ -1254,10 +1226,6 @@ int ath10k_wmi_attach(struct ath10k *ar)
void ath10k_wmi_detach(struct ath10k *ar)
{
- /* HTC should've drained the packets already */
- if (WARN_ON(atomic_read(&ar->wmi.pending_tx_count) > 0))
- ath10k_warn("there are still pending packets\n");
-
cancel_work_sync(&ar->wmi.wmi_event_work);
skb_queue_purge(&ar->wmi.wmi_event_list);
}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index b100431..2c52c23 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3044,7 +3044,6 @@ struct wmi_force_fw_hang_cmd {
#define WMI_MAX_EVENT 0x1000
/* Maximum number of pending TXed WMI packets */
-#define WMI_MAX_PENDING_TX_COUNT 128
#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
/* By default disable power save for IBSS */
@@ -3057,7 +3056,6 @@ int ath10k_wmi_attach(struct ath10k *ar);
void ath10k_wmi_detach(struct ath10k *ar);
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
-void ath10k_wmi_flush_tx(struct ath10k *ar);
int ath10k_wmi_connect_htc_service(struct ath10k *ar);
int ath10k_wmi_pdev_set_channel(struct ath10k *ar,
--
1.7.9.5
More information about the ath10k
mailing list