[PATCH v3 12/13] ath10k: introduce dynamic pdev parameters
Bartosz Markowski
bartosz.markowski at tieto.com
Thu Sep 26 11:47:16 EDT 2013
This is done exactly the same way as for vdev.
Signed-off-by: Bartosz Markowski <bartosz.markowski at tieto.com>
---
drivers/net/wireless/ath/ath10k/core.h | 1 +
drivers/net/wireless/ath/ath10k/mac.c | 10 +--
drivers/net/wireless/ath/ath10k/wmi.c | 115 ++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 148 +++++++++++++++++++++++++++++++-
4 files changed, 265 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 124e724..d5da8a9 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -120,6 +120,7 @@ struct ath10k_wmi {
wait_queue_head_t tx_credits_wq;
struct wmi_cmd_map *cmd;
struct wmi_vdev_param_map *vdev_param;
+ struct wmi_pdev_param_map *pdev_param;
u32 num_mem_chunks;
struct ath10k_mem_chunk mem_chunks[ATH10K_MAX_MEM_REQS];
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b5ae01d..8684e03 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1882,12 +1882,12 @@ static int ath10k_start(struct ieee80211_hw *hw)
else if (ar->state == ATH10K_STATE_RESTARTING)
ar->state = ATH10K_STATE_RESTARTED;
- ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1);
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
if (ret)
ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n",
ret);
- ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0);
+ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 0);
if (ret)
ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
ret);
@@ -2209,7 +2209,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
int ret = 0;
- u32 vdev_param;
+ u32 vdev_param, pdev_param;
mutex_lock(&ar->conf_mutex);
@@ -2235,8 +2235,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
"vdev %d set beacon tx mode to staggered\n",
arvif->vdev_id);
- ret = ath10k_wmi_pdev_set_param(ar,
- WMI_PDEV_PARAM_BEACON_TX_MODE,
+ pdev_param = ar->wmi.pdev_param->beacon_tx_mode;
+ ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
WMI_BEACON_STAGGERED_MODE);
if (ret)
ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 89a8cb8..3460cf4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -383,6 +383,111 @@ static struct wmi_vdev_param_map wmi_10x_vdev_param_map = {
WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
};
+static struct wmi_pdev_param_map wmi_pdev_param_map = {
+ .tx_chain_mask = WMI_PDEV_PARAM_TX_CHAIN_MASK,
+ .rx_chain_mask = WMI_PDEV_PARAM_RX_CHAIN_MASK,
+ .txpower_limit2g = WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
+ .txpower_limit5g = WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
+ .txpower_scale = WMI_PDEV_PARAM_TXPOWER_SCALE,
+ .beacon_gen_mode = WMI_PDEV_PARAM_BEACON_GEN_MODE,
+ .beacon_tx_mode = WMI_PDEV_PARAM_BEACON_TX_MODE,
+ .resmgr_offchan_mode = WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ .protection_mode = WMI_PDEV_PARAM_PROTECTION_MODE,
+ .dynamic_bw = WMI_PDEV_PARAM_DYNAMIC_BW,
+ .non_agg_sw_retry_th = WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ .agg_sw_retry_th = WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
+ .sta_kickout_th = WMI_PDEV_PARAM_STA_KICKOUT_TH,
+ .ac_aggrsize_scaling = WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ .ltr_enable = WMI_PDEV_PARAM_LTR_ENABLE,
+ .ltr_ac_latency_be = WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ .ltr_ac_latency_bk = WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ .ltr_ac_latency_vi = WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ .ltr_ac_latency_vo = WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ .ltr_ac_latency_timeout = WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ .ltr_sleep_override = WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ .ltr_rx_override = WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
+ .ltr_tx_activity_timeout = WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ .l1ss_enable = WMI_PDEV_PARAM_L1SS_ENABLE,
+ .dsleep_enable = WMI_PDEV_PARAM_DSLEEP_ENABLE,
+ .pcielp_txbuf_flush = WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
+ .pcielp_txbuf_watermark = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
+ .pcielp_txbuf_tmo_en = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
+ .pcielp_txbuf_tmo_value = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
+ .pdev_stats_update_period = WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ .vdev_stats_update_period = WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ .peer_stats_update_period = WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ .bcnflt_stats_update_period = WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ .pmf_qos = WMI_PDEV_PARAM_PMF_QOS,
+ .arp_ac_override = WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
+ .arpdhcp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED,
+ .dcs = WMI_PDEV_PARAM_DCS,
+ .ani_enable = WMI_PDEV_PARAM_ANI_ENABLE,
+ .ani_poll_period = WMI_PDEV_PARAM_ANI_POLL_PERIOD,
+ .ani_listen_period = WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ .ani_ofdm_level = WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
+ .ani_cck_level = WMI_PDEV_PARAM_ANI_CCK_LEVEL,
+ .dyntxchain = WMI_PDEV_PARAM_DYNTXCHAIN,
+ .proxy_sta = WMI_PDEV_PARAM_PROXY_STA,
+ .idle_ps_config = WMI_PDEV_PARAM_IDLE_PS_CONFIG,
+ .power_gating_sleep = WMI_PDEV_PARAM_POWER_GATING_SLEEP,
+ .fast_channel_reset = WMI_PDEV_PARAM_UNSUPPORTED,
+ .burst_dur = WMI_PDEV_PARAM_UNSUPPORTED,
+ .burst_enable = WMI_PDEV_PARAM_UNSUPPORTED,
+};
+
+static struct wmi_pdev_param_map wmi_10x_pdev_param_map = {
+ .tx_chain_mask = WMI_10X_PDEV_PARAM_TX_CHAIN_MASK,
+ .rx_chain_mask = WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
+ .txpower_limit2g = WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
+ .txpower_limit5g = WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
+ .txpower_scale = WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
+ .beacon_gen_mode = WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
+ .beacon_tx_mode = WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
+ .resmgr_offchan_mode = WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ .protection_mode = WMI_10X_PDEV_PARAM_PROTECTION_MODE,
+ .dynamic_bw = WMI_10X_PDEV_PARAM_DYNAMIC_BW,
+ .non_agg_sw_retry_th = WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ .agg_sw_retry_th = WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
+ .sta_kickout_th = WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
+ .ac_aggrsize_scaling = WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ .ltr_enable = WMI_10X_PDEV_PARAM_LTR_ENABLE,
+ .ltr_ac_latency_be = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ .ltr_ac_latency_bk = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ .ltr_ac_latency_vi = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ .ltr_ac_latency_vo = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ .ltr_ac_latency_timeout = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ .ltr_sleep_override = WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ .ltr_rx_override = WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
+ .ltr_tx_activity_timeout = WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ .l1ss_enable = WMI_10X_PDEV_PARAM_L1SS_ENABLE,
+ .dsleep_enable = WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
+ .pcielp_txbuf_flush = WMI_PDEV_PARAM_UNSUPPORTED,
+ .pcielp_txbuf_watermark = WMI_PDEV_PARAM_UNSUPPORTED,
+ .pcielp_txbuf_tmo_en = WMI_PDEV_PARAM_UNSUPPORTED,
+ .pcielp_txbuf_tmo_value = WMI_PDEV_PARAM_UNSUPPORTED,
+ .pdev_stats_update_period = WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ .vdev_stats_update_period = WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ .peer_stats_update_period = WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ .bcnflt_stats_update_period =
+ WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ .pmf_qos = WMI_10X_PDEV_PARAM_PMF_QOS,
+ .arp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED,
+ .arpdhcp_ac_override = WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
+ .dcs = WMI_10X_PDEV_PARAM_DCS,
+ .ani_enable = WMI_10X_PDEV_PARAM_ANI_ENABLE,
+ .ani_poll_period = WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
+ .ani_listen_period = WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ .ani_ofdm_level = WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
+ .ani_cck_level = WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
+ .dyntxchain = WMI_10X_PDEV_PARAM_DYNTXCHAIN,
+ .proxy_sta = WMI_PDEV_PARAM_UNSUPPORTED,
+ .idle_ps_config = WMI_PDEV_PARAM_UNSUPPORTED,
+ .power_gating_sleep = WMI_PDEV_PARAM_UNSUPPORTED,
+ .fast_channel_reset = WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
+ .burst_dur = WMI_10X_PDEV_PARAM_BURST_DUR,
+ .burst_enable = WMI_10X_PDEV_PARAM_BURST_ENABLE,
+};
+
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
{
int ret;
@@ -1870,10 +1975,12 @@ int ath10k_wmi_attach(struct ath10k *ar)
ath10k_warn("Firmware 10.X is not yet supported\n");
ar->wmi.cmd = &wmi_10x_cmd_map;
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
+ ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
ret = -ENOTSUPP;
} else {
ar->wmi.cmd = &wmi_cmd_map;
ar->wmi.vdev_param = &wmi_vdev_param_map;
+ ar->wmi.pdev_param = &wmi_pdev_param_map;
ret = 0;
}
@@ -2009,12 +2116,16 @@ int ath10k_wmi_pdev_resume_target(struct ath10k *ar)
return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_resume_cmdid);
}
-int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
- u32 value)
+int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value)
{
struct wmi_pdev_set_param_cmd *cmd;
struct sk_buff *skb;
+ if (id == WMI_PDEV_PARAM_UNSUPPORTED) {
+ ath10k_warn("pdev param %d not supported by firmware\n", id);
+ return -EINVAL;
+ }
+
skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
if (!skb)
return -ENOMEM;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1518586..80ab2f0 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2072,6 +2072,60 @@ struct wmi_csa_event {
#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
+struct wmi_pdev_param_map {
+ u32 tx_chain_mask;
+ u32 rx_chain_mask;
+ u32 txpower_limit2g;
+ u32 txpower_limit5g;
+ u32 txpower_scale;
+ u32 beacon_gen_mode;
+ u32 beacon_tx_mode;
+ u32 resmgr_offchan_mode;
+ u32 protection_mode;
+ u32 dynamic_bw;
+ u32 non_agg_sw_retry_th;
+ u32 agg_sw_retry_th;
+ u32 sta_kickout_th;
+ u32 ac_aggrsize_scaling;
+ u32 ltr_enable;
+ u32 ltr_ac_latency_be;
+ u32 ltr_ac_latency_bk;
+ u32 ltr_ac_latency_vi;
+ u32 ltr_ac_latency_vo;
+ u32 ltr_ac_latency_timeout;
+ u32 ltr_sleep_override;
+ u32 ltr_rx_override;
+ u32 ltr_tx_activity_timeout;
+ u32 l1ss_enable;
+ u32 dsleep_enable;
+ u32 pcielp_txbuf_flush;
+ u32 pcielp_txbuf_watermark;
+ u32 pcielp_txbuf_tmo_en;
+ u32 pcielp_txbuf_tmo_value;
+ u32 pdev_stats_update_period;
+ u32 vdev_stats_update_period;
+ u32 peer_stats_update_period;
+ u32 bcnflt_stats_update_period;
+ u32 pmf_qos;
+ u32 arp_ac_override;
+ u32 arpdhcp_ac_override;
+ u32 dcs;
+ u32 ani_enable;
+ u32 ani_poll_period;
+ u32 ani_listen_period;
+ u32 ani_ofdm_level;
+ u32 ani_cck_level;
+ u32 dyntxchain;
+ u32 proxy_sta;
+ u32 idle_ps_config;
+ u32 power_gating_sleep;
+ u32 fast_channel_reset;
+ u32 burst_dur;
+ u32 burst_enable;
+};
+
+#define WMI_PDEV_PARAM_UNSUPPORTED 0
+
enum wmi_pdev_param {
/* TX chian mask */
WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
@@ -2171,6 +2225,97 @@ enum wmi_pdev_param {
WMI_PDEV_PARAM_POWER_GATING_SLEEP,
};
+enum wmi_10x_pdev_param {
+ /* TX chian mask */
+ WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
+ /* RX chian mask */
+ WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
+ /* TX power limit for 2G Radio */
+ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
+ /* TX power limit for 5G Radio */
+ WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
+ /* TX power scale */
+ WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
+ /* Beacon generation mode . 0: host, 1: target */
+ WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
+ /* Beacon generation mode . 0: staggered 1: bursted */
+ WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
+ /*
+ * Resource manager off chan mode .
+ * 0: turn off off chan mode. 1: turn on offchan mode
+ */
+ WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
+ /*
+ * Protection mode:
+ * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
+ */
+ WMI_10X_PDEV_PARAM_PROTECTION_MODE,
+ /* Dynamic bandwidth 0: disable 1: enable */
+ WMI_10X_PDEV_PARAM_DYNAMIC_BW,
+ /* Non aggregrate/ 11g sw retry threshold.0-disable */
+ WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
+ /* aggregrate sw retry threshold. 0-disable*/
+ WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
+ /* Station kickout threshold (non of consecutive failures).0-disable */
+ WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
+ /* Aggerate size scaling configuration per AC */
+ WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
+ /* LTR enable */
+ WMI_10X_PDEV_PARAM_LTR_ENABLE,
+ /* LTR latency for BE, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
+ /* LTR latency for BK, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
+ /* LTR latency for VI, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
+ /* LTR latency for VO, in us */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
+ /* LTR AC latency timeout, in ms */
+ WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
+ /* LTR platform latency override, in us */
+ WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
+ /* LTR-RX override, in us */
+ WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
+ /* Tx activity timeout for LTR, in us */
+ WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
+ /* L1SS state machine enable */
+ WMI_10X_PDEV_PARAM_L1SS_ENABLE,
+ /* Deep sleep state machine enable */
+ WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
+ /* pdev level stats update period in ms */
+ WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
+ /* vdev level stats update period in ms */
+ WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
+ /* peer level stats update period in ms */
+ WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
+ /* beacon filter status update period */
+ WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
+ /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
+ WMI_10X_PDEV_PARAM_PMF_QOS,
+ /* Access category on which ARP and DHCP frames are sent */
+ WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
+ /* DCS configuration */
+ WMI_10X_PDEV_PARAM_DCS,
+ /* Enable/Disable ANI on target */
+ WMI_10X_PDEV_PARAM_ANI_ENABLE,
+ /* configure the ANI polling period */
+ WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
+ /* configure the ANI listening period */
+ WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
+ /* configure OFDM immunity level */
+ WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
+ /* configure CCK immunity level */
+ WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
+ /* Enable/Disable CDD for 1x1 STAs in rate control module */
+ WMI_10X_PDEV_PARAM_DYNTXCHAIN,
+ /* Enable/Disable Fast channel reset*/
+ WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
+ /* Set Bursting DUR */
+ WMI_10X_PDEV_PARAM_BURST_DUR,
+ /* Set Bursting Enable*/
+ WMI_10X_PDEV_PARAM_BURST_ENABLE,
+};
+
struct wmi_pdev_set_param_cmd {
__le32 param_id;
__le32 param_value;
@@ -3797,8 +3942,7 @@ int ath10k_wmi_pdev_suspend_target(struct ath10k *ar);
int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
u16 rd5g, u16 ctl2g, u16 ctl5g);
-int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
- u32 value);
+int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value);
int ath10k_wmi_cmd_init(struct ath10k *ar);
int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *);
void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
--
1.7.10
More information about the ath10k
mailing list