February 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Feb 1 09:46:12 PST 2015
Ending: Sat Feb 28 09:52:48 PST 2015
Messages: 200

• [PATCH] ath10k: Replace ioread with wmb for data sync   Johannes Berg
• [PATCH] ath10k: Replace ioread with wmb for data sync   Johannes Berg
• [PATCH] ath10k: Replace ioread with wmb for data sync   Johannes Berg
• [PATCH] ath10k: Replace ioread with wmb for data sync   Johannes Berg
• [PATCH v2 3/4] mac80211: initialize rate control earlier for tdls station   Johannes Berg
• Failed to start radar detection: -22 (Invalid argument)   Jeremias Blendin
• Firmware (firmware-2-ct-non-commercial-full-13.bin) and ath10k_pci crash   Jeremias Blendin
• [PATCH] ath10k: Replace ioread with wmb for data sync   Adrian Chadd
• Question on setting tx-power in ath10k.   Adrian Chadd
• Firmware 10.2.4   Yeoh Chun-Yeow
• Any idea why we cannot disable /b rates?   Yeoh Chun-Yeow
• Any idea why we cannot disable /b rates?   Yeoh Chun-Yeow
• First QCA6174 firmware release   Olaf Dreyer
• oops in pwq_activate_delayed_work+0x1f/0x3f   Janusz Dziedzic
• Failed to start radar detection: -22 (Invalid argument)   Janusz Dziedzic
• Failed to start radar detection: -22 (Invalid argument)   Janusz Dziedzic
• [RFC 1/2] ath10k: add WOW disconnect support   Janusz Dziedzic
• [RFC 2/2] ath10k: add WOW patterns/magic packet   Janusz Dziedzic
• [RFCv2 1/4] ath10k: add WMI support for WOW   Janusz Dziedzic
• [RFCv2 2/4] ath10k: add WOW disconnect/magic-packet support   Janusz Dziedzic
• [RFCv2 3/4] ath10k: add WMI support for WOW patterns   Janusz Dziedzic
• [RFCv2 4/4] ath10k: add WOW patterns support   Janusz Dziedzic
• [PATCH] ath10k: Delete unnecessary checks before the function call "release_firmware"   SF Markus Elfring
• [PATCH] ath10k: Replace ioread with wmb for data sync   Florian Fainelli
• First QCA6174 firmware release   Sebastian Gottschall
• Unable to read firmware registers on crash?   Ben Greear
• Unable to read firmware registers on crash?   Ben Greear
• Unable to read firmware registers on crash?   Ben Greear
• Unable to read firmware registers on crash?   Ben Greear
• Unable to read firmware registers on crash?   Ben Greear
• More than one ath10k NIC will not load (bisected)   Ben Greear
• [PATCH 1/8] ath10k: scan should handle scan-start-failed event properly.   Ben Greear
• station kickout   Ben Greear
• More than one ath10k NIC will not load (bisected)   Ben Greear
• [RFT] ath10k: restart fw on tx-credit timeout   Ben Greear
• [RFT] ath10k: restart fw on tx-credit timeout   Ben Greear
• [RFT] ath10k: restart fw on tx-credit timeout   Ben Greear
• [RFT] ath10k: restart fw on tx-credit timeout   Ben Greear
• [PATCH] ath10k: Increase AST table SKID length limit   Ben Greear
• [RFT] ath10k: restart fw on tx-credit timeout   Ben Greear
• ath10k number-of-peers exceeded (hacked 3.17, CT firmware)   Ben Greear
• [PATCH v2] ath10k: Increase AST table SKID length limit   Ben Greear
• station kickout   Ben Greear
• Sending frames on monitor interface?   Ben Greear
• Sending frames on monitor interface?   Ben Greear
• CT firmware 10.1.467-13 is released.   Ben Greear
• CT firmware 10.1.467-13 is released.   Ben Greear
• ath10k + INTEL_IDLE aka. cstates == firmware crash   Ben Greear
• Sending frames on monitor interface?   Ben Greear
• Firmware (firmware-2-ct-non-commercial-full-13.bin) and ath10k_pci crash   Ben Greear
• Any idea why we cannot disable /b rates?   Ben Greear
• Any idea why we cannot disable /b rates?   Ben Greear
• Any idea why we cannot disable /b rates?   Ben Greear
• Question on setting tx-power in ath10k.   Ben Greear
• Question on setting tx-power in ath10k.   Ben Greear
• Question on setting tx-power in ath10k.   Ben Greear
• Any idea why we cannot disable /b rates?   Ben Greear
• Getting a 'no-ack' tx status?   Ben Greear
• Getting a 'no-ack' tx status?   Ben Greear
• First QCA6174 firmware release   Joris Guisson
• First QCA6174 firmware release   Joris Guisson
• First QCA6174 firmware release   Austin Hendrix
• First QCA6174 firmware release   Austin Hendrix
• First QCA6174 firmware release   Austin Hendrix
• First QCA6174 firmware release   Austin Hendrix
• [PATCH] ath10k: Increase AST table SKID length limit   SenthilKumar Jegadeesan
• [PATCH] ath10k: Increase AST table SKID length limit   SenthilKumar Jegadeesan
• [PATCH v2] ath10k: Increase AST table SKID length limit   SenthilKumar Jegadeesan
• [PATCH] ath10k: Enable encrytion of ADDBA request in PMF configuration   SenthilKumar Jegadeesan
• [PATCH] ath10k: Remove trace about getting temperature   Matthias Kaehlcke
• Unable to read firmware registers on crash?   Michal Kazior
• Unable to read firmware registers on crash?   Michal Kazior
• [RFC 4/4] ath10k: introduce basic tdls functionality   Michal Kazior
• Unable to read firmware registers on crash?   Michal Kazior
• More than one ath10k NIC will not load (bisected)   Michal Kazior
• [RFTv2 2/5] ath10k: fix wmi-htc tx credit starvation   Michal Kazior
• More than one ath10k NIC will not load (bisected)   Michal Kazior
• [PATCH] ath10k: add TxBF support   Michal Kazior
• [PATCH 0/4] ath10k: implement fw stats for wmi-tlv   Michal Kazior
• [PATCH 1/2] ath10k: Bypass PLL setting on target init for QCA9888   Michal Kazior
• [PATCH v3 0/7] ath10k: add multi-channel support   Michal Kazior
• [PATCH v3 1/7] ath10k: allow empty ssid vdev config   Michal Kazior
• [PATCH v3 2/7] ath10k: implement chanctx API   Michal Kazior
• [PATCH v3 3/7] ath10k: implement adaptive qcs command   Michal Kazior
• [PATCH v3 4/7] ath10k: protect ar->arvifs linking with data_lock   Michal Kazior
• [PATCH v3 5/7] ath10k: rework tx queue locking   Michal Kazior
• [PATCH v3 6/7] ath10k: implement tx pause wmi event   Michal Kazior
• [PATCH v3 7/7] ath10k: enable multi-channel on supported devices   Michal Kazior
• [RFT] ath10k: restart fw on tx-credit timeout   Michal Kazior
• Unable to read firmware registers on crash?   Michal Kazior
• [RFT] ath10k: restart fw on tx-credit timeout   Michal Kazior
• [PATCH] ath10k: workaround corrupted htt rx events   Michal Kazior
• [RFT] ath10k: restart fw on tx-credit timeout   Michal Kazior
• First QCA6174 firmware release   Michal Kazior
• [PATCH] ath10k: Fix interrupt storm   Michal Kazior
• [RFT] ath10k: restart fw on tx-credit timeout   Michal Kazior
• [PATCH v3 2/7] ath10k: implement chanctx API   Michal Kazior
• [PATCH] ath10k: fix AP/IBSS CSA with template based fw   Michal Kazior
• [PATCH 1/2] ath10k: workaround qca6174 sta powersave issue   Michal Kazior
• [PATCH 2/2] ath10k: disable multi-vif ps by default   Michal Kazior
• [PATCH] ath10k: fix AP/IBSS CSA with template based fw   Michal Kazior
• [PATCH 0/4] ath10k: implement fw stats for wmi-tlv   Michal Kazior
• [PATCH v2] ath10k: fix AP/IBSS CSA with template based fw   Michal Kazior
• [PATCH V2 2/2] ath10k: Fix interrupt storm   Michal Kazior
• [PATCH 1/2] ath10k: fix broken traffic for 802.1x in client mode   Michal Kazior
• [PATCH 2/2] ath10k: fix broken traffic for static WEP in IBSS   Michal Kazior
• Sending frames on monitor interface?   Michal Kazior
• QosControl missing in eapol key exchanging message   Michal Kazior
• Sending frames on monitor interface?   Michal Kazior
• ath10k + INTEL_IDLE aka. cstates == firmware crash   Michal Kazior
• ath10k + INTEL_IDLE aka. cstates == firmware crash   Michal Kazior
• [PATCH v2 4/4] ath10k: introduce basic tdls functionality   Michal Kazior
• [PATCH] ath10k: fix ap u-apsd cmd on qca6174 w/ wmi-tlv   Michal Kazior
• [PATCH] ath10k: fix TxBF VHT capabilities for 2+ RF-chain devices   Michal Kazior
• [PATCH 1/2] ath10k: refactor p2p noa code   Michal Kazior
• [PATCH 2/2] ath10k: implement handling of p2p noa event   Michal Kazior
• [PATCH v2] ath10k: Replace ioread with mb to drain write buffer   Jakub Kiciński
• [PATCH v2] ath10k: Replace ioread with mb to drain write buffer   Jakub Kiciński
• AW: number of peers exceeded after a short time   Conrad Kostecki
• AW: More than one ath10k NIC will not load (bisected)   Conrad Kostecki
• [PATCH] ath: support new FCC DFS Radar Type 1   Zefir Kurtisi
• [RFTv2 2/5] ath10k: fix wmi-htc tx credit starvation   Matti Laakso
• [RFT] ath10k: restart fw on tx-credit timeout   Matti Laakso
• [RFT] ath10k: restart fw on tx-credit timeout   Matti Laakso
• [PATCH 1/2] ath10k: Bypass PLL setting on target init for QCA9888   Rajkumar Manoharan
• [PATCH 2/2] ath10k: Increase copy engine entries for rx wmi   Rajkumar Manoharan
• [PATCH v2 1/2] ath10k: Bypass PLL setting on target init for QCA9888   Rajkumar Manoharan
• [PATCH v2 2/2] ath10k: Increase copy engine entries for rx wmi   Rajkumar Manoharan
• [PATCH 1/2] ath10k: increase duty cycle maximum limit   Rajkumar Manoharan
• [PATCH 2/2] ath10k: fix quiet duration configuration   Rajkumar Manoharan
• [PATCH 1/3] ath10k: add sysfs entry to configure quiet period   Rajkumar Manoharan
• [PATCH 2/3] ath10k: fix wrong symlink name on error path   Rajkumar Manoharan
• [PATCH 3/3] ath10k: add symlink for hwmon device   Rajkumar Manoharan
• [PATCH] ath10k: update MODULE_FIRMWARE definitions for QCA6174   Bartosz Markowski
• [PATCH] ath10k: Replace ioread with wmb for data sync   Peter Oh
• [PATCH] ath10k: Replace ioread with wmb for data sync   Peter Oh
• [PATCH] ath10k: Replace ioread with wmb for data sync   Peter Oh
• [PATCH] ath10k: Replace ioread with wmb for data sync   Peter Oh
• [PATCH] ath10k: Replace ioread with wmb for data sync   Peter Oh
• [PATCH] ath10k: Replace ioread with wmb for data sync   Peter Oh
• [PATCH] ath10k: Replace ioread with wmb for data sync   Peter Oh
• [PATCH] ath10k: Replace ioread with wmb for data sync   Peter Oh
• [PATCH v2 2/2] ath10k: Increase copy engine entries for rx wmi   Peter Oh
• [PATCH 1/3] ath: Introduce chirp parameter used by DFS   Peter Oh
• [PATCH 2/3] ath10k: Update chirp value in pulse event   Peter Oh
• [PATCH 3/3] ath: Enhance radar detection by looking up chirp   Peter Oh
• [PATCH 1/3] ath: Introduce chirp parameter used by DFS   Peter Oh
• [PATCH] ath: support new FCC DFS Radar Type 1   Peter Oh
• [RFC 0/4] ath10k: add basic tdls support   Marek Puzyniak
• [RFC 1/4] ath10k: unify tx mode and dispatch   Marek Puzyniak
• [RFC 2/4] ath10k: make peer type configurable   Marek Puzyniak
• [RFC 3/4] mac80211: initialize rate control earlier for tdls station   Marek Puzyniak
• [RFC 4/4] ath10k: introduce basic tdls functionality   Marek Puzyniak
• [PATCH] ath10k: fix wmm params per vdev   Marek Puzyniak
• [PATCH] ath10k: fix wmm params per vdev   Marek Puzyniak
• [PATCH v2] ath10k: fix wmm params per vdev   Marek Puzyniak
• [PATCH v2 0/4] ath10k: add basic tdls support   Marek Puzyniak
• [PATCH v2 1/4] ath10k: unify tx mode and dispatch   Marek Puzyniak
• [PATCH v2 2/4] ath10k: make peer type configurable   Marek Puzyniak
• [PATCH v2 3/4] mac80211: initialize rate control earlier for tdls station   Marek Puzyniak
• [PATCH v2 4/4] ath10k: introduce basic tdls functionality   Marek Puzyniak
• [PATCH 1/2] ath10k: Bypass PLL setting on target init for QCA9888   Rajkumar
• [PATCH v2 2/2] ath10k: Increase copy engine entries for rx wmi   Rajkumar
• [PATCH v2 1/2] ath10k: Bypass PLL setting on target init for QCA9888   Rajkumar
• [PATCH v2] ath10k: Increase AST table SKID length limit   Salakava Jegadeesan, Senthil
• QosControl missing in eapol key exchanging message   Shu, Nick
• CT firmware 10.1.467-13 is released.   Dave Taht
• [PATCH] ath10k: Fix interrupt storm   Vasanthakumar Thiagarajan
• [PATCH] ath10k: Fix interrupt storm   Vasanthakumar Thiagarajan
• [PATCH] ath10k: Fix interrupt storm   Vasanthakumar Thiagarajan
• [PATCH V2 1/2] ath10k: Move ath10k_vdev_stop() up before ath10k_vdev_start_restart()   Vasanthakumar Thiagarajan
• [PATCH V2 2/2] ath10k: Fix interrupt storm   Vasanthakumar Thiagarajan
• [PATCH V2 2/2] ath10k: Fix interrupt storm   Vasanthakumar Thiagarajan
• [PATCH V3 1/2] ath10k: Move ath10k_vdev_stop() up before ath10k_vdev_start_restart()   Vasanthakumar Thiagarajan
• [PATCH V3 2/2] ath10k: Fix interrupt storm   Vasanthakumar Thiagarajan
• [PATCH] ath10k:Prevent setting wrong key idx for station   Kalle Valo
• [PATCH v2 1/2] ath10k: change dma beacon cmd prototype   Kalle Valo
• [PATCH] ath10k: Use TX cksum offload only for CHECKSUM_PARTIAL   Kalle Valo
• [PATCH-RESEND] ath10k: add log level configuration for fw_dbglog   Kalle Valo
• [PATCH] ath10k: enable qca6174 hw3.2   Kalle Valo
• [PATCH 4/8] ath10k: make dbglog debug messages be 'warn' level.   Kalle Valo
• [PATCH 3/8] ath10k: fix spelling mistakes and add details to mac logging.   Kalle Valo
• [PATCH 1/8] ath10k: scan should handle scan-start-failed event properly.   Kalle Valo
• [PATCH 0/4] ath10k: implement fw stats for wmi-tlv   Kalle Valo
• [PATCH] ath10k: add TxBF support   Kalle Valo
• More than one ath10k NIC will not load (bisected)   Kalle Valo
• More than one ath10k NIC will not load (bisected)   Kalle Valo
• First QCA6174 firmware release   Kalle Valo
• [PATCH] ath10k: fix wmm params per vdev   Kalle Valo
• station kickout   Kalle Valo
• [PATCH 1/8] ath10k: scan should handle scan-start-failed event properly.   Kalle Valo
• [PATCH] ath10k: defer AP self-peer removal wait   Kalle Valo
• [PATCH 0/4] ath10k: implement fw stats for wmi-tlv   Kalle Valo
• [PATCH] ath10k: add TxBF support   Kalle Valo
• [PATCH] ath10k: fix AP/IBSS CSA with template based fw   Kalle Valo
• [PATCH] ath10k: fix AP/IBSS CSA with template based fw   Kalle Valo
• ath10k + INTEL_IDLE aka. cstates == firmware crash   Fabian Wittenberg
• ath10k + INTEL_IDLE aka. cstates == firmware crash   Fabian Wittenberg
• ath10k + INTEL_IDLE aka. cstates == firmware crash   Fabian Wittenberg
• Firmware (firmware-2-ct-non-commercial-full-13.bin) and ath10k_pci crash   Fabian Wittenberg

Last message date: Sat Feb 28 09:52:48 PST 2015
Archived on: Sat Feb 28 09:53:15 PST 2015

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...