AW: More than one ath10k NIC will not load (bisected)
Conrad Kostecki
ck at conrad-kostecki.de
Thu Feb 5 12:50:36 PST 2015
> Do you have a PC with 2 NICs in it that you could try yourself?
I have two ath10k cards build in my soekris.
Those are working fine without any problems.
Both cards are loading fine.
[ 2.731750] ath10k_pci 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 3.037142] ath10k_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[ 3.037192] ath10k_pci 0000:07:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
[ 3.037564] ath10k_pci 0000:0c:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 3.340106] ath10k_pci 0000:0c:00.0: irq 43 for MSI/MSI-X
[ 3.340145] ath10k_pci 0000:0c:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
[ 4.461521] ath10k_pci 0000:07:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.2-00082-4-2 api 3 htt 2.1
[ 4.469965] ath10k_pci 0000:07:00.0: debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
[ 5.070084] ath: EEPROM regdomain: 0x0
[ 5.070086] ath: EEPROM indicates default country code should be used
[ 5.070087] ath: doing EEPROM country->regdmn map search
[ 5.070090] ath: country maps to regdmn code: 0x37
[ 5.070092] ath: Country alpha2 being used: DE
[ 5.070093] ath: Regpair used: 0x37
[ 5.085625] ath10k_pci 0000:0c:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.2-00082-4-2 api 3 htt 2.1
[ 5.085631] ath10k_pci 0000:0c:00.0: debug 0 debugfs 0 tracing 0 dfs 1 testmode 0
[ 5.680073] ath: EEPROM regdomain: 0x0
[ 5.680078] ath: EEPROM indicates default country code should be used
[ 5.680080] ath: doing EEPROM country->regdmn map search
[ 5.680083] ath: country maps to regdmn code: 0x37
[ 5.680085] ath: Country alpha2 being used: DE
[ 5.680087] ath: Regpair used: 0x37
More information about the ath10k
mailing list