Any idea why we cannot disable /b rates?

[Ben Greear]

I'm going to start digging into the code, but in case someone already
knows...

I ran this command to try to disable any frames set at /b rates (AP is on channel 1).

But, according to ath10k sniffer, beacons are still sent with 1Mbps rate.

iw dev vap1 set bitrates legacy-2.4 12 mcs-2.4


Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com