October 2014 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Oct 1 01:20:23 PDT 2014
Ending: Fri Oct 31 01:03:43 PDT 2014
Messages: 263

• [PATCH v2 1/2] ath10k: add firmware crash counters   Kalle Valo
• [PATCH v2 01/10] ath10k: use 64-bit vdev map.   Kalle Valo
• Unable to upgrade firmware for QCA988x module, ath10k!   Ramprasad Vempati
• Unable to upgrade firmware for QCA988x module, ath10k!   Michal Kazior
• Unable to upgrade firmware for QCA988x module, ath10k!   Kalle Valo
• Unable to upgrade firmware for QCA988x module, ath10k!   Ramprasad Vempati
• [PATCH] ath10k: warn on unhandled htt events   Michal Kazior
• Unable to upgrade firmware for QCA988x module, ath10k!   Michal Kazior
• Unable to upgrade firmware for QCA988x module, ath10k!   Kalle Valo
• [PATCH] ath10k: don't create bssid peer for ibss   Janusz Dziedzic
• Unable to upgrade firmware for QCA988x module, ath10k!   Ramprasad Vempati
• [PATCH 0/4] ath10k: Add pktlog support   Rajkumar Manoharan
• [PATCH 1/4] ath10k: Add support to configure pktlog filter   Rajkumar Manoharan
• [PATCH 2/4] ath10k: add tracing for ath10k_htt_pktlog   Rajkumar Manoharan
• [PATCH 3/4] ath10k: add tracing for rx descriptor   Rajkumar Manoharan
• [PATCH 4/4] ath10k: add tracing for tx msdu pktlog event   Rajkumar Manoharan
• [PATCH 1/4] ath10k: Add support to configure pktlog filter   Michal Kazior
• [PATCH 1/4] ath10k: Add support to configure pktlog filter   Rajkumar Manoharan
• [PATCH 1/4] ath10k: Add support to configure pktlog filter   Michal Kazior
• ath10k: calibration data through Device Tree?   Kalle Valo
• [PATCH 1/4] ath10k: Add support to configure pktlog filter   Rajkumar Manoharan
• ath10k: calibration data through Device Tree?   Kalle Valo
• ath10k: calibration data through Device Tree?   Kalle Valo
• ath10k: calibration data through Device Tree?   Arnd Bergmann
• ath10k: calibration data through Device Tree?   Mark Rutland
• ath10k: calibration data through Device Tree?   Kalle Valo
• ath10k: calibration data through Device Tree?   Kalle Valo
• ath10k: calibration data through Device Tree?   Arnd Bergmann
• ath10k: calibration data through Device Tree?   Kalle Valo
• ath10k: calibration data through Device Tree?   Mark Rutland
• ath10k: calibration data through Device Tree?   Arnd Bergmann
• [PATCH v2 0/4] ath10k: Add pktlog support   Rajkumar Manoharan
• [PATCH v2 1/4] ath10k: Add support to configure pktlog filter   Rajkumar Manoharan
• [PATCH v2 2/4] ath10k: add tracing for ath10k_htt_pktlog   Rajkumar Manoharan
• [PATCH v2 3/4] ath10k: add tracing for rx descriptor   Rajkumar Manoharan
• [PATCH v2 4/4] ath10k: add tracing for tx info   Rajkumar Manoharan
• ath10k: calibration data through Device Tree?   Andy Lutomirski
• ath10k: calibration data through Device Tree?   Adrian Chadd
• ath10k: calibration data through Device Tree?   Andy Lutomirski
• Dynamic channel Access   Kamran Nishat
• Probe Response packets sometimes delayed by 200ms   Avery Pennarun
• Unable to upgrade firmware for QCA988x module, ath10k!   Michal Kazior
• RTS/CTS exchanges do not follow the RTS threshold   Okhwan Lee
• Probe Response packets sometimes delayed by 200ms   Michal Kazior
• RTS/CTS exchanges do not follow the RTS threshold   Michal Kazior
• Probe Response packets sometimes delayed by 200ms   Avery Pennarun
• Probe Response packets sometimes delayed by 200ms   Michal Kazior
• Dynamic channel Access   Yeoh Chun-Yeow
• Dynamic channel Access   Okhwan Lee
• ath10k: calibration data through Device Tree?   Arnd Bergmann
• ath10k: calibration data through Device Tree?   Andy Lutomirski
• ath10k: calibration data through Device Tree?   Mark Rutland
• ath10k: calibration data through Device Tree?   Arnd Bergmann
• ath10k: calibration data through Device Tree?   Andy Lutomirski
• ath10k: calibration data through Device Tree?   Adrian Chadd
• [PATCH] ath10k: don't create bssid peer for ibss   Yeoh Chun-Yeow
• Probe Response packets sometimes delayed by 200ms   Avery Pennarun
• Unable to upgrade firmware for QCA988x module, ath10k!   Ramprasad Vempati
• Unable to upgrade firmware for QCA988x module, ath10k!   Michal Kazior
• [PATCH v2 1/4] ath10k: Add support to configure pktlog filter   Kalle Valo
• [PATCH v2 1/4] ath10k: Add support to configure pktlog filter   Rajkumar Manoharan
• [PATCH v2 1/4] ath10k: Add support to configure pktlog filter   Kalle Valo
• [PATCH] ath10k: advertise all possible firmware(-api) files   Bartosz Markowski
• [PATCH] ath10k: add missing '\n' to warning and error messages   Kalle Valo
• [PATCH 0/4] ath10k: Add tracing for tx and rx frames   Rajkumar Manoharan
• [PATCH 1/4] ath10k: add tracepoint for wmi mgmt tx frames   Rajkumar Manoharan
• [PATCH 2/4] ath10k: add tracepoint for wmi bcn tx   Rajkumar Manoharan
• [PATCH 3/4] ath10k: add htt rx tracepoints   Rajkumar Manoharan
• [PATCH 4/4] ath10k: add tracepoint for htt tx frames   Rajkumar Manoharan
• [PATCH 0/4] ath10k: Add tracing for tx and rx frames   Sujith Manoharan
• [PATCH 0/4] ath10k: Add tracing for tx and rx frames   Rajkumar Manoharan
• [PATCH 1/2] ath10k: add tracepoint for htt tx frames   Rajkumar Manoharan
• [PATCH 2/2] ath10k: add tracing for frame transmission   Rajkumar Manoharan
• [PATCH 1/2] ath10k: add tracepoint for htt tx frames   Rajkumar Manoharan
• [PATCH v2] ath10k: add tracing for frame transmission   Rajkumar Manoharan
• [PATCH] ath10k: don't create bssid peer for ibss   Janusz Dziedzic
• [PATCH] ath10k: fix WMI scan command length   Janusz Dziedzic
• [PATCH v2 0/4] ath10k: Add pktlog support   Kalle Valo
• [PATCH v2] ath10k: add tracing for frame transmission   Kalle Valo
• [PATCH v2] ath10k: add tracing for frame transmission   Kalle Valo
• ath10k: calibration data through Device Tree?   Kalle Valo
• Unable to upgrade firmware for QCA988x module, ath10k!   Ramprasad Vempati
• [PATCH v2] ath10k: add tracing for frame transmission   Rajkumar Manoharan
• [PATCH v2] ath10k: add tracing for frame transmission   Rajkumar Manoharan
• [PATCH] ath10k: fix kernel panic while shutting down AP   Rajkumar Manoharan
• [PATCH] ath10k: fix kernel panic while shutting down AP   Michal Kazior
• [PATCH] ath10k: fix kernel panic while shutting down AP   Kalle Valo
• [PATCH v2] ath10k: add tracing for frame transmission   Kalle Valo
• [PATCH] ath10k: warn on unhandled htt events   Kalle Valo
• [PATCH] ath10k: don't create bssid peer for ibss   Kalle Valo
• [PATCH] ath10k: advertise all possible firmware(-api) files   Kalle Valo
• [PATCH] ath10k: fix WMI scan command length   Kalle Valo
• [PATCH v2] ath10k: add tracing for frame transmission   Kalle Valo
• [PATCH] ath10k: fix kernel panic while shutting down AP   Rajkumar Manoharan
• [PATCH] ath10k: fix kernel panic while shutting down AP   Rajkumar Manoharan
• [PATCH] ath10k: fix kernel panic while shutting down AP   Michal Kazior
• [PATCH] ath10k: fix kernel panic while shutting down AP   Rajkumar Manoharan
• [PATCH] ath10k: fix kernel panic while shutting down AP   Rajkumar Manoharan
• [PATCH] ath10k: fix kernel panic while shutting down AP   Michal Kazior
• [PATCH] ath10k: fix kernel panic while shutting down AP   Michal Kazior
• [PATCH] ath10k: fix kernel panic while shutting down AP   Michal Kazior
• [PATCH] ath10k: fix kernel panic while shutting down AP   Kalle Valo
• How to know the information about RTS reception in mac80211 or device driver   Michal Kazior
• How to know the information about RTS reception in mac80211 or device driver   Sujith Manoharan
• How to know the information about RTS reception in mac80211 or device driver   Michal Kazior
• [PATCH 0/5] ath10k: pci related fixes 2014-10-09   Michal Kazior
• [PATCH 1/5] ath10k: re-disable interrupts after target init   Michal Kazior
• [PATCH 2/5] ath10k: mask/unmask msi fw irq   Michal Kazior
• [PATCH 3/5] ath10k: make warm reset a bit safer and faster   Michal Kazior
• [PATCH 4/5] ath10k: split reset logic from power up   Michal Kazior
• [PATCH 5/5] ath10k: replace power up/down with reset callback   Michal Kazior
• [PATCH 0/3] ath10k: speed up recovery   Michal Kazior
• [PATCH 1/3] ath10k: fix possible bmi crash   Michal Kazior
• [PATCH 2/3] ath10k: expose hw restart via debugfs   Michal Kazior
• [PATCH 3/3] ath10k: speed up hw recovery   Michal Kazior
• [PATCH 3/3] ath10k: speed up hw recovery   Michal Kazior
• [PATCH 3/5] ath10k: make warm reset a bit safer and faster   Michal Kazior
• [PATCH] ath10k: fix kernel panic while shutting down AP   Rajkumar Manoharan
• [PATCH 0/3] ath10k: assoc clean ups 2014-10-10   Michal Kazior
• [PATCH 1/3] ath10k: clean up assoc code   Michal Kazior
• [PATCH 2/3] ath10k: skip some commands on reassoc   Michal Kazior
• [PATCH 3/3] ath10k: clean up sta auth/assoc code   Michal Kazior
• [PATCH] ath10k: simplify computation of mgmt rx band   Michal Kazior
• [PATCH] ath10k: use bss_info as txpower source   Michal Kazior
• [PATCH v2] ath10k: fix kernel panic while shutting down AP   Rajkumar Manoharan
• [PATCH] ath10k: use bss_info as txpower source   Kalle Valo
• ath10k firmware crash   Cedric VONCKEN
• [PATCH v2] ath10k: fix kernel panic while shutting down AP   Kalle Valo
• [PATCH] ath10k: use bss_info as txpower source   Michal Kazior
• ath10k firmware crash   Michal Kazior
• [PATCH 0/3] ath10k: cal file support   Kalle Valo
• [PATCH 1/3] ath10k: add back enum ath10k_bus   Kalle Valo
• [PATCH 2/3] ath10k: refactor ath10k_init_download_firmware()   Kalle Valo
• [PATCH 3/3] ath10k: retrieve calibration data from file   Kalle Valo
• [PROTOTYPE PATCH] ath10k: prototype code for Device Tree support   Kalle Valo
• ath10k firmware crash   voncken
• [PATCH 4/5] ath10k: split reset logic from power up   Kalle Valo
• ath10k firmware crash   Michal Kazior
• [PATCH 5/5] ath10k: replace power up/down with reset callback   Kalle Valo
• [PATCH 2/3] ath10k: expose hw restart via debugfs   Kalle Valo
• [PATCH 3/3] ath10k: speed up hw recovery   Kalle Valo
• [PATCH 5/5] ath10k: replace power up/down with reset callback   Michal Kazior
• [PATCH 3/3] ath10k: speed up hw recovery   Michal Kazior
• [PATCH 3/3] ath10k: speed up hw recovery   Kalle Valo
• [PATCH 2/3] ath10k: expose hw restart via debugfs   Michal Kazior
• ath10k firmware crash   voncken
• ath10k firmware crash   voncken
• ath10k firmware crash   Michal Kazior
• ath10k firmware crash   Michal Kazior
• ath10k firmware crash   voncken
• ath10k firmware crash   voncken
• ath10k firmware crash   voncken
• ath10k firmware crash   Bartosz Markowski
• ath10k firmware crash   voncken
• Constant transmit mode?   Ben Greear
• ath10k: calibration data through Device Tree?   Kumar Gala
• [PATCH v2 0/6] ath10k: pci related fixes 2014-10-09   Michal Kazior
• [PATCH v2 1/6] ath10k: re-disable interrupts after target init   Michal Kazior
• [PATCH v2 2/6] ath10k: mask/unmask msi fw irq   Michal Kazior
• [PATCH v2 3/6] ath10k: split ce pipe init/alloc further   Michal Kazior
• [PATCH v2 4/6] ath10k: make warm reset a bit safer and faster   Michal Kazior
• [PATCH v2 5/6] ath10k: split reset logic from power up   Michal Kazior
• [PATCH v2 6/6] ath10k: don't reset chip on power_down   Michal Kazior
• [PATCH v2 0/3] ath10k: speed up recovery   Michal Kazior
• [PATCH v2 1/3] ath10k: fix possible bmi crash   Michal Kazior
• [PATCH v2 2/3] ath10k: expose hw restart via debugfs   Michal Kazior
• [PATCH v2 3/3] ath10k: speed up hw recovery   Michal Kazior
• [PATCH 0/7] ath10k: add support for new wmi-tlv backend   Michal Kazior
• [PATCH 1/7] ath10k: fix wmi svc bitmap dbg print   Michal Kazior
• [PATCH 2/7] ath10k: add sanity checks for service bmap parsing   Michal Kazior
• [PATCH 3/7] ath10k: make wmi service bitmap non-debug   Michal Kazior
• [PATCH 4/7] ath10k: implement intermediate event args   Michal Kazior
• [PATCH 5/7] ath10k: introduce wmi ops   Michal Kazior
• [PATCH 6/7] ath10k: make some wmi functions public   Michal Kazior
• [PATCH 7/7] ath10k: implement wmi-tlv backend   Michal Kazior
• [PATCH 7/7] ath10k: implement wmi-tlv backend   Michal Kazior
• [PATCH 0/9] ath10k: htt rx fixes and clean ups   Michal Kazior
• [PATCH 1/9] ath10k: don't drop control and null func Rx   Michal Kazior
• [PATCH 2/9] ath10k: remove unused variable   Michal Kazior
• [PATCH 3/9] ath10k: use ieee80211 defines for crypto param lengths   Michal Kazior
• [PATCH 4/9] ath10k: fix rx buffer tracing   Michal Kazior
• [PATCH 5/9] ath10k: deduplicate htt rx dma unmapping   Michal Kazior
• [PATCH 6/9] ath10k: don't drop frames aggressively   Michal Kazior
• [PATCH 7/9] ath10k: add extra sanity check when popping amsdu   Michal Kazior
• [PATCH 8/9] ath10k: don't forget to replenish after fragmented Rx   Michal Kazior
• [PATCH 9/9] ath10k: clear htt->rx_confused on load   Michal Kazior
• [PATCH v3] Add the target register read/write and memory dump debugfs interface   Yanbo Li
• [PATCH 7/7] ath10k: implement wmi-tlv backend   Ben Greear
• [PATCH] ath10k: add missing '\n' to warning and error messages   Kalle Valo
• [PATCH v3] Add the target register read/write and memory dump debugfs interface   Michal Kazior
• [PATCH 0/3] ath10k: cal file support   Kalle Valo
• [PATCH 0/3] ath10k: assoc clean ups 2014-10-10   Kalle Valo
• [PATCH] ath10k: simplify computation of mgmt rx band   Kalle Valo
• [PATCH] ath10k: use bss_info as txpower source   Kalle Valo
• [PATCH v2 3/3] ath10k: speed up hw recovery   Kalle Valo
• [PATCH v2 3/3] ath10k: speed up hw recovery   Michal Kazior
• [PATCH v2 3/3] ath10k: speed up hw recovery   Kalle Valo
• [PATCH 0/2] ath10k: minor htt tracing fix   Michal Kazior
• [PATCH 1/2] ath10k: remove tsf argument from rx_desc tracing   Michal Kazior
• [PATCH 2/2] ath10k: re-use trace class   Michal Kazior
• [PATCH v3] ath10k: Add the target register read/write and memory dump debugfs interface   Li, Yanbo
• [PATCH v3] ath10k: Add the target register read/write and memory dump debugfs interface   Michal Kazior
• [PATCH 1/2] ath10k: remove tsf argument from rx_desc tracing   Michal Kazior
• Change channel bandwidth without iw command   Okhwan Lee
• Change channel bandwidth without iw command   Michal Kazior
• ath10k: calibration data through Device Tree?   Kalle Valo
• [PATCH] ath10k: call correct function for frag threshold   Michal Kazior
• [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on survey   Felix Fietkau
• Change channel bandwidth without iw command   Okhwan Lee
• [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on survey   Kalle Valo
• [PATCH v2 4/6] ath10k: make warm reset a bit safer and faster   Michal Kazior
• [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on survey   Felix Fietkau
• [PATCH v2 4/6] ath10k: make warm reset a bit safer and faster   Kalle Valo
• [PATCH v2 4/6] ath10k: make warm reset a bit safer and faster   Michal Kazior
• [PATCH v2 0/3] ath10k: speed up recovery   Michal Kazior
• [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on survey   Kalle Valo
• [PATCH v2 0/6] ath10k: pci related fixes 2014-10-09   Kalle Valo
• [PATCH v2 0/3] ath10k: speed up recovery   Kalle Valo
• [PATCH] ath10k: fix pm resume after suspend   Bartosz Markowski
• [PATCH 1/2] ath10k: remove tsf argument from rx_desc tracing   Kalle Valo
• Enabling ham radio channels on ath10k   Alessandro Bolletta
• [PATCH 7/9] ath10k: add extra sanity check when popping amsdu   Kalle Valo
• [PATCH] ath10k: fix pm resume after suspend   Kalle Valo
• Change channel bandwidth without iw command   Michal Kazior
• [PATCH 7/7] ath10k: implement wmi-tlv backend   Michal Kazior
• Change channel bandwidth without iw command   Okhwan Lee
• Change channel bandwidth without iw command   Michal Kazior
• Pull request: ath 20141024   Kalle Valo
• [PATCH 0/9] ath10k: htt rx fixes and clean ups   Kalle Valo
• [PATCH 0/2] ath10k: minor htt tracing fix   Kalle Valo
• [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on survey   Kalle Valo
• [PATCH] ath10k: call correct function for frag threshold   Kalle Valo
• [PATCH v3] Add the target register read/write and memory dump debugfs interface   Kalle Valo
• [PATCH v3] Add the target register read/write and memory dump debugfs interface   YanBo
• QUALCOMM spoof attempt detected: Pull request: ath 20141024   Oh, Peter
• Change channel bandwidth without iw command   Okhwan Lee
• [PATCH v2] ath10k: fix pm resume after suspend   Bartosz Markowski
• [PATCH] ath10k: fix pm resume after suspend   Bartosz Markowski
• Pull request: ath 20141024   John W. Linville
• [PATCH] ath10k: avoid possible deadlock with scan timeout   Michal Kazior
• [PATCH v3 0/4] ath10k: pci related fixes 2014-10-09   Michal Kazior
• [PATCH v3 1/4] ath10k: change ce ring cleanup logic   Michal Kazior
• [PATCH v3 2/4] ath10k: make warm reset a bit safer and faster   Michal Kazior
• [PATCH v3 3/4] ath10k: split reset logic from power up   Michal Kazior
• [PATCH v3 4/4] ath10k: don't reset chip on power_down   Michal Kazior
• [PATCH v3 0/3] ath10k: speed up recovery   Michal Kazior
• [PATCH v3 1/3] ath10k: fix possible bmi crash   Michal Kazior
• [PATCH v3 2/3] ath10k: expose hw restart via debugfs   Michal Kazior
• [PATCH v3 3/3] ath10k: speed up hw recovery   Michal Kazior
• [PATCH 7/7] ath10k: implement wmi-tlv backend   Michal Kazior
• [PATCH] ath10k: add tracing for tx ieee80211 header   Rajkumar Manoharan
• [PATCH] ath10k: add tracing for tx ieee80211 header   Johannes Berg
• [PATCH] ath10k: add tracing for tx ieee80211 header   Rajkumar Manoharan
• [PATCH] ath10k: handle ieee80211 header and payload tracing separately   Rajkumar Manoharan
• [PATCH] ath10k: handle ieee80211 header and payload tracing separately   Johannes Berg
• TX Power Concerns between Firmware   Pushpal Sidhu
• [PATCH] ath10k: handle ieee80211 header and payload tracing separately   Rajkumar Manoharan
• [PATCH v2] ath10k: handle ieee80211 header and payload tracing separately   Rajkumar Manoharan
• [PATCH] ath10k: avoid possible deadlock with scan timeout   Kalle Valo
• [PATCH v3 0/4] ath10k: pci related fixes 2014-10-09   Kalle Valo
• [PATCH v3 0/3] ath10k: speed up recovery   Kalle Valo
• [PATCH v2] ath10k: fix pm resume after suspend   Kalle Valo
• [PATCH v3] ath10k: fix pm resume after suspend   Bartosz Markowski

Last message date: Fri Oct 31 01:03:43 PDT 2014
Archived on: Fri Oct 31 01:04:18 PDT 2014

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...