ath10k firmware crash

[Bartosz Markowski]

On 13 October 2014 14:06, voncken <cedric.voncken at acksys.fr> wrote:
>> >
>> > Have you a benchmark reference with ATH10K ? at this time we can send
>> around 700 Mbit/s, is it the maximum or we can expected better ?
>>
>> If this is OTA then this is pretty good. If this is cabled RF w/ attentuator
>> it should be possible to get ~900mbps of UDP traffic with multiple streams on
>> iperf. At least that's what I was getting on 10.1 firmware (on both AP and
>> STA) last time I checked.
>>
>> Getting more than 700mbps OTA requires AP and STA antenna alignment voodoo.
>>
> I did some tests with a linksys WRT1900AC and I have ~950 mbps OTA easily.

You mean ath10k (STA) VS WRT1900AC get up ~950mbps?
If so, could you say what's the HW, FW version you use?

-- 
Bartosz