[PATCH v2 0/6] ath10k: pci related fixes 2014-10-09

[Michal Kazior]

Hi,

First 2 patches address some irq issues.

Other 4 fix and cleanup device resetting.

Hopefully this will make ath10k a little more
robust when it comes to warm reset.

As a side effect of the changes ath10k now boots a
little faster (slightly over a second instead of
two).

v2:
 * don't remove power_up/down [Kalle]
 * fix CE crash [Janusz]
 * remove irq workaround in patch #2


Michal Kazior (6):
  ath10k: re-disable interrupts after target init
  ath10k: mask/unmask msi fw irq
  ath10k: split ce pipe init/alloc further
  ath10k: make warm reset a bit safer and faster
  ath10k: split reset logic from power up
  ath10k: don't reset chip on power_down

 drivers/net/wireless/ath/ath10k/ce.c  |  56 +++--
 drivers/net/wireless/ath/ath10k/ce.h  |   8 +-
 drivers/net/wireless/ath/ath10k/hw.h  |   1 +
 drivers/net/wireless/ath/ath10k/pci.c | 390 +++++++++++++++++-----------------
 4 files changed, 227 insertions(+), 228 deletions(-)

-- 
1.8.5.3