September 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Sep 1 01:34:51 PDT 2016
Ending: Fri Sep 30 08:55:59 PDT 2016
Messages: 377

• [PATCH WIP/RFC v3 1/6] iw_cxgb4: call dev_put() on l2t allocation failure   Christoph Hellwig
• [PATCH WIP/RFC v3 2/6] iw_cxgb4: block module unload until all ep resources are released   Christoph Hellwig
• [PATCH WIP/RFC v3 3/6] nvme_rdma: keep a ref on the ctrl during delete/flush   Christoph Hellwig
  • [PATCH WIP/RFC v3 3/6] nvme_rdma: keep a ref on the ctrl during delete/flush   Sagi Grimberg
• [PATCH WIP/RFC v3 6/6] nvme-rdma: use ib_client API to detect device removal   Christoph Hellwig
• [PATCH WIP/RFC v3 5/6] nvme-rdma: add DELETING queue flag   Christoph Hellwig
  • [PATCH WIP/RFC v3 5/6] nvme-rdma: add DELETING queue flag   Steve Wise
• blk-mq: allow passing in an external queue mapping V2   Christoph Hellwig
• [PATCH 4/7] blk-mq: allow the driver to pass in an affinity mask   Christoph Hellwig
  • [PATCH 4/7] blk-mq: allow the driver to pass in an affinity mask   Keith Busch
    • [PATCH 4/7] blk-mq: allow the driver to pass in an affinity mask   Keith Busch
    • [PATCH 4/7] blk-mq: allow the driver to pass in an affinity mask   Christoph Hellwig
      • [PATCH 4/7] blk-mq: allow the driver to pass in an affinity mask   Keith Busch
      • [PATCH 4/7] blk-mq: allow the driver to pass in an affinity mask   Christoph Hellwig
      • [PATCH 4/7] blk-mq: allow the driver to pass in an affinity mask   Keith Busch
      • [PATCH 4/7] blk-mq: allow the driver to pass in an affinity mask   Thomas Gleixner
• crash when connecting to targets using nr_io_queues < num cpus   Sagi Grimberg
  • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
    • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
      • crash when connecting to targets using nr_io_queues < num cpus   Sagi Grimberg
      • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
      • crash when connecting to targets using nr_io_queues < num cpus   Ming Lin
      • crash when connecting to targets using nr_io_queues < num cpus   Keith Busch
      • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
      • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
      • crash when connecting to targets using nr_io_queues < num cpus   'Christoph Hellwig'
      • crash when connecting to targets using nr_io_queues < num cpus   'Christoph Hellwig'
      • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
      • crash when connecting to targets using nr_io_queues < num cpus   'Christoph Hellwig'
      • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
      • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
      • crash when connecting to targets using nr_io_queues < num cpus   'Christoph Hellwig'
      • crash when connecting to targets using nr_io_queues < num cpus   Steve Wise
      • crash when connecting to targets using nr_io_queues < num cpus   Jens Axboe
      • crash when connecting to targets using nr_io_queues < num cpus   'Christoph Hellwig'
      • crash when connecting to targets using nr_io_queues < num cpus   Jens Axboe
      • crash when connecting to targets using nr_io_queues < num cpus   Jens Axboe
• [PATCH v4 1/6] iw_cxgb4: call dev_put() on l2t allocation failure   Steve Wise
• [PATCH v4 2/6] iw_cxgb4: block module unload until all ep resources are released   Steve Wise
• [PATCH WIP/RFC v3 4/6] nvme-rdma: destroy nvme queue rdma resources on connect failure   Steve Wise
• [PATCH v4 3/6] nvme_rdma: keep a ref on the ctrl during delete/flush   Steve Wise
• [PATCH v4 0/6] nvme-rdma device removal fixes   Steve Wise
  • [PATCH v4 4/6] nvme-rdma: destroy nvme queue rdma resources on connect failure   Steve Wise
    • [PATCH v4 4/6] nvme-rdma: destroy nvme queue rdma resources on connect failure   Steve Wise
  • [PATCH v4 5/6] nvme-rdma: add DELETING queue flag   Steve Wise
  • [PATCH v4 6/6] nvme-rdma: use ib_client API to detect device removal   Steve Wise
• nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
  • nvmf/rdma host crash during heavy load and keep alive recovery   Sagi Grimberg
    • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Sagi Grimberg
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Sagi Grimberg
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   'Christoph Hellwig'
      • nvmf/rdma host crash during heavy load and keep alive recovery   Sagi Grimberg
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Sagi Grimberg
      • nvmf/rdma host crash during heavy load and keep alive recovery   'Christoph Hellwig'
      • nvmf/rdma host crash during heavy load and keep alive recovery   'Christoph Hellwig'
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Gabriel Krisman Bertazi
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
    • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Sagi Grimberg
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
      • nvmf/rdma host crash during heavy load and keep alive recovery   Steve Wise
• [PATCH] admin-cmd: Added smart-log command support.   Chaitanya Kulkarni
  • [PATCH] admin-cmd: Added smart-log command support.   Sagi Grimberg
    • [PATCH] admin-cmd: Added smart-log command support.   Christoph Hellwig
      • [PATCH] admin-cmd: Added smart-log command support.   Sagi Grimberg
  • [PATCH] admin-cmd: Added smart-log command support.   Sagi Grimberg
    • [PATCH] admin-cmd: Added smart-log command support.   Christoph Hellwig
• [PATCH v5 0/6] nvme-rdma device removal fixes   Steve Wise
  • [PATCH v5 1/6] iw_cxgb4: call dev_put() on l2t allocation failure   Steve Wise
  • [PATCH v5 2/6] iw_cxgb4: block module unload until all ep resources are released   Steve Wise
  • [PATCH v5 3/6] nvme_rdma: keep a ref on the ctrl during delete/flush   Steve Wise
  • [PATCH v5 4/6] nvme-rdma: destroy nvme queue rdma resources on connect failure   Steve Wise
  • [PATCH v5 5/6] nvme-rdma: add DELETING queue flag   Steve Wise
  • [PATCH v5 6/6] nvme-rdma: use ib_client API to detect device removal   Steve Wise
  • [PATCH v5 0/6] nvme-rdma device removal fixes   Sagi Grimberg
    • [PATCH v5 0/6] nvme-rdma device removal fixes   Steve Wise
      • [PATCH v5 0/6] nvme-rdma device removal fixes   Sagi Grimberg
      • [PATCH v5 0/6] nvme-rdma device removal fixes   Steve Wise
• [PATCH 3/3] nvme: Enable autonomous power state transitions   J Freyensee
  • [PATCH 3/3] nvme: Enable autonomous power state transitions   Andy Lutomirski
• [PATCH v2 3/3] nvme: Enable autonomous power state transitions   J Freyensee
  • [PATCH v2 3/3] nvme: Enable autonomous power state transitions   Andy Lutomirski
    • [PATCH v2 3/3] nvme: Enable autonomous power state transitions   J Freyensee
• [PATCH 09/15] virtio-blk: Pass attribute group to device_add_disk   Michael S. Tsirkin
• Oops when completing request on the wrong queue   Gabriel Krisman Bertazi
• [PATCH] nvme-rdma: fix null pointer dereference on req->mr   Colin King
  • [PATCH] nvme-rdma: fix null pointer dereference on req->mr   Christoph Hellwig
  • [PATCH] nvme-rdma: fix null pointer dereference on req->mr   Sagi Grimberg
• [PATCH 4.7 022/143] genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP   Greg Kroah-Hartman
• [PATCH 4.4 027/113] genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP   Greg Kroah-Hartman
• [PATCH] nvme: add back dependency on CONFIG_BLOCK   Arnd Bergmann
  • [PATCH] nvme: add back dependency on CONFIG_BLOCK   Sagi Grimberg
    • [PATCH] nvme: add back dependency on CONFIG_BLOCK   Christoph Hellwig
• [PATCH] nvme: Don't suspend admin queue that wasn't created   Gabriel Krisman Bertazi
  • [PATCH] nvme: Don't suspend admin queue that wasn't created   J Freyensee
  • [PATCH] nvme: Don't suspend admin queue that wasn't created   Jens Axboe
• [PATCH] nvme-cli: match treq value names to spec   Jay Freyensee
  • [PATCH] nvme-cli: match treq value names to spec   Sagi Grimberg
• [PATCH] nvme-cli: change nqntype to subtype, per spec   Jay Freyensee
  • [PATCH] nvme-cli: change nqntype to subtype, per spec   Sagi Grimberg
• [PATCH] nvme/quirk: Add a delay before checking device ready for memblaze device   Keith Busch
  • [PATCH] nvme/quirk: Add a delay before checking device ready for memblaze device   Jens Axboe
    • [PATCH] nvme/quirk: Add a delay before checking device ready for memblaze device   Jens Axboe
    • [PATCH] nvme/quirk: Add a delay before checking device ready for memblaze device   Wenbo Wang
    • [PATCH] nvme/quirk: Add a delay before checking device ready for memblaze device   Jens Axboe
• [PATCH] nvmetcli: README description of discovery   Jay Freyensee
  • [PATCH] nvmetcli: README description of discovery   Christoph Hellwig
• Failure with 8K Write operations   Narayan Ayalasomayajula
  • Failure with 8K Write operations   Sagi Grimberg
    • Failure with 8K Write operations   Narayan Ayalasomayajula
      • Failure with 8K Write operations   J Freyensee
      • Failure with 8K Write operations   Narayan Ayalasomayajula
      • Failure with 8K Write operations   J Freyensee
      • Failure with 8K Write operations   Narayan Ayalasomayajula
• Scheduled Maintenance & Upgrade   Help Desk
• [GIT PULL] yet another round of fabrics fixes for the next 4.8-rc   Sagi Grimberg
  • [GIT PULL] yet another round of fabrics fixes for the next 4.8-rc   Jens Axboe
• [PATCH, RFC] nvme: Do not test the read-ahead flag in cmd_flags   Bart Van Assche
  • [PATCH, RFC] nvme: Do not test the read-ahead flag in cmd_flags   Christoph Hellwig
    • [PATCH, RFC] nvme: Do not test the read-ahead flag in cmd_flags   Jens Axboe
      • [PATCH, RFC] nvme: Do not test the read-ahead flag in cmd_flags   Christoph Hellwig
      • [PATCH, RFC] nvme: Do not test the read-ahead flag in cmd_flags   Jens Axboe
• [PATCH v3 0/3] nvme power saving   Andy Lutomirski
  • [PATCH v3 1/3] nvme/scsi: Remove power management support   Andy Lutomirski
    • [PATCH v3 1/3] nvme/scsi: Remove power management support   Christoph Hellwig
      • [PATCH v3 1/3] nvme/scsi: Remove power management support   Keith Busch
      • [PATCH v3 1/3] nvme/scsi: Remove power management support   Christoph Hellwig
      • [PATCH v3 1/3] nvme/scsi: Remove power management support   Johannes Thumshirn
      • [PATCH v3 1/3] nvme/scsi: Remove power management support   J Freyensee
  • [PATCH v3 2/3] nvme: Pass pointers, not dma addresses, to nvme_get/set_features()   Andy Lutomirski
    • [PATCH v3 2/3] nvme: Pass pointers, not dma addresses, to nvme_get/set_features()   Christoph Hellwig
      • [PATCH v3 2/3] nvme: Pass pointers, not dma addresses, to nvme_get/set_features()   Andy Lutomirski
      • [PATCH v3 2/3] nvme: Pass pointers, not dma addresses, to nvme_get/set_features()   Jens Axboe
  • [PATCH v3 3/3] nvme: Enable autonomous power state transitions   Andy Lutomirski
    • [PATCH v3 3/3] nvme: Enable autonomous power state transitions   Christoph Hellwig
      • [PATCH v3 3/3] nvme: Enable autonomous power state transitions   Andy Lutomirski
      • [PATCH v3 3/3] nvme: Enable autonomous power state transitions   Christoph Hellwig
    • [PATCH v3 3/3] nvme: Enable autonomous power state transitions   Keith Busch
• [PATCH RFC 00/21] blk-mq: Introduce combined hardware queues   Alexander Gordeev
  • [PATCH 03/21] block: Get rid of unused request_queue::nr_queues member   Alexander Gordeev
  • [PATCH 04/21] blk-mq: Do not limit number of queues to 'nr_cpu_ids' in allocations   Alexander Gordeev
  • [PATCH 05/21] blk-mq: Update hardware queue map after q->nr_hw_queues is set   Alexander Gordeev
  • [PATCH 06/21] block: Remove redundant blk_mq_ops::map_queue() interface   Alexander Gordeev
  • [PATCH 07/21] blk-mq: Remove a redundant assignment   Alexander Gordeev
  • [PATCH 08/21] blk-mq: Cleanup hardware context data node selection   Alexander Gordeev
  • [PATCH 09/21] blk-mq: Cleanup a loop exit condition   Alexander Gordeev
  • [PATCH 10/21] blk-mq: Get rid of unnecessary blk_mq_free_hw_queues()   Alexander Gordeev
  • [PATCH 11/21] blk-mq: Move duplicating code to blk_mq_exit_hctx()   Alexander Gordeev
  • [PATCH 12/21] blk-mq: Uninit hardware context in order reverse to init   Alexander Gordeev
  • [PATCH 13/21] blk-mq: Move hardware context init code into blk_mq_init_hctx()   Alexander Gordeev
  • [PATCH 14/21] blk-mq: Rework blk_mq_init_hctx() function   Alexander Gordeev
  • [PATCH 15/21] blk-mq: Pair blk_mq_hctx_kobj_init() with blk_mq_hctx_kobj_put()   Alexander Gordeev
  • [PATCH 16/21] blk-mq: Set flush_start_tag to BLK_MQ_MAX_DEPTH   Alexander Gordeev
  • [PATCH RFC 17/21] blk-mq: Introduce a 1:N hardware contexts   Alexander Gordeev
  • [PATCH RFC 18/21] blk-mq: Enable tag numbers exceed hardware queue depth   Alexander Gordeev
  • [PATCH RFC 19/21] blk-mq: Enable combined hardware queues   Alexander Gordeev
  • [PATCH RFC 20/21] blk-mq: Allow combined hardware queues   Alexander Gordeev
  • [PATCH 21/21] null_blk: Do not limit # of hardware queues to # of CPUs   Alexander Gordeev
  • [PATCH RFC 00/21] blk-mq: Introduce combined hardware queues   Christoph Hellwig
    • [PATCH RFC 00/21] blk-mq: Introduce combined hardware queues   Alexander Gordeev
  • [PATCH RFC 00/21] blk-mq: Introduce combined hardware queues   Keith Busch
    • [PATCH RFC 00/21] blk-mq: Introduce combined hardware queues   Alexander Gordeev
      • [PATCH RFC 00/21] blk-mq: Introduce combined hardware queues   Bart Van Assche
      • [PATCH RFC 00/21] blk-mq: Introduce combined hardware queues   Keith Busch
• [PATCH 01/21] blk-mq: Fix memory leaks on a queue cleanup   Alexander Gordeev
• [PATCH 02/21] blk-mq: Fix a potential NULL pointer assignment to hctx tags   Alexander Gordeev
• Should drivers like nvme let userspace control their latency via dev_pm_qos?   Andy Lutomirski
  • Should drivers like nvme let userspace control their latency via dev_pm_qos?   One Thousand Gnomes
    • Should drivers like nvme let userspace control their latency via dev_pm_qos?   Andy Lutomirski
  • Should drivers like nvme let userspace control their latency via dev_pm_qos?   Rafael J. Wysocki
    • Should drivers like nvme let userspace control their latency via dev_pm_qos?   Andy Lutomirski
• [PATCH v4 0/3] nvme power saving   Andy Lutomirski
  • [PATCH v4 1/3] nvme/scsi: Remove power management support   Andy Lutomirski
    • [PATCH v4 1/3] nvme/scsi: Remove power management support   J Freyensee
  • [PATCH v4 2/3] nvme: Pass pointers, not dma addresses, to nvme_get/set_features()   Andy Lutomirski
  • [PATCH v4 3/3] nvme: Enable autonomous power state transitions   Andy Lutomirski
  • [PATCH v4 0/3] nvme power saving   J Freyensee
  • [PATCH v4 0/3] nvme power saving   Andy Lutomirski
    • [PATCH v4 0/3] nvme power saving   Christoph Hellwig
  • [PATCH v4 0/3] nvme power saving   Jens Axboe
    • [PATCH v4 0/3] nvme power saving   Andy Lutomirski
      • [PATCH v4 0/3] nvme power saving   Jens Axboe
      • [PATCH v4 0/3] nvme power saving   J Freyensee
      • [PATCH v4 0/3] nvme power saving   Andy Lutomirski
      • [PATCH v4 0/3] nvme power saving   Keith Busch
      • [PATCH v4 0/3] nvme power saving   Jens Axboe
  • [PATCH v4 0/3] nvme power saving   Christoph Hellwig
    • [PATCH v4 0/3] nvme power saving   Jens Axboe
• NVMf (NVME over fabrics) Performance   Kirubakaran Kaliannan
  • NVMf (NVME over fabrics) Performance   Sagi Grimberg
    • NVMf (NVME over fabrics) Performance   Kirubakaran Kaliannan
      • NVMf (NVME over fabrics) Performance   Sagi Grimberg
• NVMe management through a SCSI SEP target   Don Brace
• [PATCH 1/2] nvme-cli/fabrics: Add keep-alive-tmo param to connect cmd   Steve Wise
  • [PATCH 1/2] nvme-cli/fabrics: Add keep-alive-tmo param to connect cmd   J Freyensee
    • [PATCH 1/2] nvme-cli/fabrics: Add keep-alive-tmo param to connect cmd   Keith Busch
• [PATCH 2/2] nvme-cli/fabrics: Add reconnect-delay param to connect cmd   Steve Wise
  • [PATCH 2/2] nvme-cli/fabrics: Add reconnect-delay param to connect cmd   J Freyensee
• [PATCH] nvme-rdma: Fix early queue flags settings   Sagi Grimberg
  • [PATCH] nvme-rdma: Fix early queue flags settings   Steve Wise
    • [PATCH] nvme-rdma: Fix early queue flags settings   Sagi Grimberg
  • [PATCH] nvme-rdma: Fix early queue flags settings   Christoph Hellwig
    • [PATCH] nvme-rdma: Fix early queue flags settings   Steve Wise
      • [PATCH] nvme-rdma: Fix early queue flags settings   Sagi Grimberg
      • [PATCH] nvme-rdma: Fix early queue flags settings   'Christoph Hellwig'
      • [PATCH] nvme-rdma: Fix early queue flags settings   Steve Wise
      • [PATCH] nvme-rdma: Fix early queue flags settings   Steve Wise
      • [PATCH] nvme-rdma: Fix early queue flags settings   Steve Wise
      • [PATCH] nvme-rdma: Fix early queue flags settings   Sagi Grimberg
      • [PATCH] nvme-rdma: Fix early queue flags settings   Steve Wise
      • [PATCH] nvme-rdma: Fix early queue flags settings   Sagi Grimberg
• [PATCH] nvmet: Use direct IO for writes   Sagi Grimberg
  • [PATCH] nvmet: Use direct IO for writes   Christoph Hellwig
    • [PATCH] nvmet: Use direct IO for writes   Jens Axboe
      • [PATCH] nvmet: Use direct IO for writes   Sagi Grimberg
      • [PATCH] nvmet: Use direct IO for writes   Jens Axboe
      • [PATCH] nvmet: Use direct IO for writes   Sagi Grimberg
      • [PATCH] nvmet: Use direct IO for writes   Jens Axboe
      • [PATCH] nvmet: Use direct IO for writes   Christoph Hellwig
• newbie question: Chelsio NIC drivers want kernel 4.1   Riches Jr, Robert M
  • newbie question: Chelsio NIC drivers want kernel 4.1   J Freyensee
    • newbie question: Chelsio NIC drivers want kernel 4.1   Steve Wise
• [PATCH] nvme-rdma: only clear queue flags after successful connect   Sagi Grimberg
  • [PATCH] nvme-rdma: only clear queue flags after successful connect   Christoph Hellwig
  • [PATCH] nvme-rdma: only clear queue flags after successful connect   Steve Wise
    • [PATCH] nvme-rdma: only clear queue flags after successful connect   Jens Axboe
• [PATCH] nvme: Add tertiary number to NVME_VS   Gabriel Krisman Bertazi
  • [PATCH] nvme: Add tertiary number to NVME_VS   Christoph Hellwig
  • [PATCH] nvme: Add tertiary number to NVME_VS   Sagi Grimberg
• [PATCH] nvmet: Make dsm number of ranges zero based   Sagi Grimberg
  • [PATCH] nvmet: Make dsm number of ranges zero based   Christoph Hellwig
• nvme-cli: Plea for help to document fabrics commands   J Freyensee
  • nvme-cli: Plea for help to document fabrics commands   Christoph Hellwig
• [PATCH RFC] nvme-cli: propose 'c' vs 'r' for connect flag   Jay Freyensee
  • [PATCH RFC] nvme-cli: propose 'c' vs 'r' for connect flag   Christoph Hellwig
    • [PATCH RFC] nvme-cli: propose 'c' vs 'r' for connect flag   Steve Wise
    • [PATCH RFC] nvme-cli: propose 'c' vs 'r' for connect flag   Keith Busch
      • [PATCH RFC] nvme-cli: propose 'c' vs 'r' for connect flag   J Freyensee
      • [PATCH RFC] nvme-cli: propose 'c' vs 'r' for connect flag   Sagi Grimberg
• [PATCH] nvme.h: resync with nvme-cli   Christoph Hellwig
  • [PATCH] nvme.h: resync with nvme-cli   Christoph Hellwig
  • [PATCH] nvme.h: resync with nvme-cli   Keith Busch
• nvme-cli: add endianess annotations   Christoph Hellwig
  • [PATCH 01/18] import linux/nvme.h   Christoph Hellwig
    • [PATCH 01/18] import linux/nvme.h   Sagi Grimberg
  • [PATCH 02/18] fix linux/nvme.h for use with nvme-cli   Christoph Hellwig
  • [PATCH 03/18] use nvme.h from Linux   Christoph Hellwig
  • [PATCH 04/18] dynamically allocate log page buffers   Christoph Hellwig
  • [PATCH 05/18] use abort() instead of __builtin_abort   Christoph Hellwig
  • [PATCH 06/18] various trivial sparse fixes   Christoph Hellwig
  • [PATCH 07/18] add support for checking endianess annotations using sparse   Christoph Hellwig
  • [PATCH 08/18] add missing endianess annoations for lightnvm data structures   Christoph Hellwig
  • [PATCH 09/18] fabrics: use correct endianess helper in print_discovery_log   Christoph Hellwig
  • [PATCH 10/18] intel: use correct endianess helpers in show_temp_stats   Christoph Hellwig
  • [PATCH 11/18] fix num_ctrls endianess in nvme_ns_attachment   Christoph Hellwig
  • [PATCH 12/18] add missing endianess conversions in print_list_item   Christoph Hellwig
  • [PATCH 13/18] add missing endianess conversions in json_nvme_id_ns   Christoph Hellwig
  • [PATCH 14/18] add missing endianess conversions in json_nvme_id_ctrl   Christoph Hellwig
  • [PATCH 15/18] add missing endianess conversions in json_smart_log   Christoph Hellwig
  • [PATCH 16/18] add missing endianess conversions in __lnvm_do_get_bbtbl   Christoph Hellwig
  • [PATCH 17/18] add missing endianess conversions in __lnvm_do_set_bbtbl   Christoph Hellwig
  • [PATCH 18/18] add missing endianess conversions in lnvm_do_set_bbtbl   Christoph Hellwig
  • nvme-cli: add endianess annotations   Keith Busch
• [PATCH] blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx   Christoph Hellwig
• [PATCH] nvme-cli: change 'r' to 'c' for connect flag   Jay Freyensee
• [GIT PULL] nvme fabrics patches for 4.9   Sagi Grimberg
  • [GIT PULL] nvme fabrics patches for 4.9   Jens Axboe
• [PATCH v3] add u64 number parser   James Smart
  • [PATCH v3] add u64 number parser   Linus Torvalds
• [PATCH v4] add u64 number parser   James Smart
  • [PATCH v4] add u64 number parser   J Freyensee
• [PATCH] lightnvm: add missing \n to end of dev_err message   Colin King
  • [PATCH] lightnvm: add missing \n to end of dev_err message   J Freyensee
• [PATCH] nvme-rdma: add missing \n to end of dev_err message   Colin King
  • [PATCH] nvme-rdma: add missing \n to end of dev_err message   J Freyensee
• [PATCH] nvme: add missing \n to end of dev_warn message   Colin King
  • [PATCH] nvme: add missing \n to end of dev_warn message   J Freyensee
• [PATCH 1/3] nvme-fabrics: patch target code in prep for FC transport support   James Smart
  • [PATCH 1/3] nvme-fabrics: patch target code in prep for FC transport support   Christoph Hellwig
• [PATCH 2/3] nvme-fabrics: set sqe.command_id in core not transports   James Smart
  • [PATCH 2/3] nvme-fabrics: set sqe.command_id in core not transports   Christoph Hellwig
• [PATCH 3/3] nvme-fabrics: Move controller id to opts struct   James Smart
  • [PATCH 3/3] nvme-fabrics: Move controller id to opts struct   Christoph Hellwig
    • [PATCH 3/3] nvme-fabrics: Move controller id to opts struct   James Smart
      • [PATCH 3/3] nvme-fabrics: Move controller id to opts struct   Christoph Hellwig
      • [PATCH 3/3] nvme-fabrics: Move controller id to opts struct   James Smart
• [PATCH 0/2 v2] nvme-fabrics: infrastructure changes for fc protocol support   James Smart
• [PATCH 1/2 v2] nvme-fabrics: patch target code in prep for FC transport support   James Smart
• [PATCH 2/2 v2] nvme-fabrics: set sqe.command_id in core not transports   James Smart
  • [PATCH 2/2 v2] nvme-fabrics: set sqe.command_id in core not transports   Christoph Hellwig
• [PATCH 0/9] Introduce blk_quiesce_queue() and blk_resume_queue()   Bart Van Assche
  • [PATCH 1/9] blk-mq: Introduce blk_mq_queue_stopped()   Bart Van Assche
    • [PATCH 1/9] blk-mq: Introduce blk_mq_queue_stopped()   Hannes Reinecke
    • [PATCH 1/9] blk-mq: Introduce blk_mq_queue_stopped()   Johannes Thumshirn
  • [PATCH 2/9] dm: Fix a race condition related to stopping and starting queues   Bart Van Assche
    • [PATCH 2/9] dm: Fix a race condition related to stopping and starting queues   Hannes Reinecke
    • [PATCH 2/9] dm: Fix a race condition related to stopping and starting queues   Johannes Thumshirn
  • [PATCH 3/9] [RFC] nvme: Use BLK_MQ_S_STOPPED instead of QUEUE_FLAG_STOPPED in blk-mq code   Bart Van Assche
  • [PATCH 4/9] block: Move blk_freeze_queue() and blk_unfreeze_queue() code   Bart Van Assche
    • [PATCH 4/9] block: Move blk_freeze_queue() and blk_unfreeze_queue() code   Hannes Reinecke
      • [PATCH 4/9] block: Move blk_freeze_queue() and blk_unfreeze_queue() code   Johannes Thumshirn
  • [PATCH 5/9] block: Extend blk_freeze_queue_start() to the non-blk-mq path   Bart Van Assche
    • [PATCH 5/9] block: Extend blk_freeze_queue_start() to the non-blk-mq path   Johannes Thumshirn
    • [PATCH 5/9] block: Extend blk_freeze_queue_start() to the non-blk-mq path   Ming Lei
      • [PATCH 5/9] block: Extend blk_freeze_queue_start() to the non-blk-mq path   Bart Van Assche
      • [PATCH 5/9] block: Extend blk_freeze_queue_start() to the non-blk-mq path   Bart Van Assche
  • [PATCH 6/9] block: Rename mq_freeze_wq and mq_freeze_depth   Bart Van Assche
    • [PATCH 6/9] block: Rename mq_freeze_wq and mq_freeze_depth   Johannes Thumshirn
  • [PATCH 7/9] blk-mq: Introduce blk_quiesce_queue() and blk_resume_queue()   Bart Van Assche
  • [PATCH 8/9] SRP transport: Port srp_wait_for_queuecommand() to scsi-mq   Bart Van Assche
  • [PATCH 9/9] [RFC] nvme: Fix a race condition   Bart Van Assche
    • [PATCH 9/9] [RFC] nvme: Fix a race condition   Steve Wise
      • [PATCH 9/9] [RFC] nvme: Fix a race condition   Bart Van Assche
      • [PATCH 9/9] [RFC] nvme: Fix a race condition   James Bottomley
      • [PATCH 9/9] [RFC] nvme: Fix a race condition   Bart Van Assche
      • [PATCH 9/9] [RFC] nvme: Fix a race condition   Steve Wise
      • [PATCH 9/9] [RFC] nvme: Fix a race condition   Steve Wise
  • [PATCH 0/9] Introduce blk_quiesce_queue() and blk_resume_queue()   Mike Snitzer
    • [PATCH 0/9] Introduce blk_quiesce_queue() and blk_resume_queue()   Bart Van Assche
    • [PATCH 0/9] Introduce blk_quiesce_queue() and blk_resume_queue()   Bart Van Assche
• nvme-cli won't build   Steve Wise
  • nvme-cli won't build   Christoph Hellwig
    • nvme-cli won't build   Christoph Hellwig
      • nvme-cli won't build   Steve Wise
• Create IO queue variation between kernels   Nisha Miller
  • Create IO queue variation between kernels   Keith Busch
• [PATCH 0/1] nvme : Add sysfs entry for NVMe CMBs when appropriate   Stephen Bates
  • [PATCH 1/1] nvme : Add sysfs entry for NVMe CMBs when appropriate   Stephen Bates
    • [PATCH 1/1] nvme : Add sysfs entry for NVMe CMBs when appropriate   Jon Derrick
      • [PATCH 1/1] nvme : Add sysfs entry for NVMe CMBs when appropriate   Stephen Bates
• [PATCH 0/4] .txt input files for discover man pages   Jay Freyensee
  • [PATCH 1/4] nvme-cli: Documentation for nvme-discover   Jay Freyensee
  • [PATCH 3/4] nvme-cli: Add nvme-connect.txt shell for fill in   Jay Freyensee
  • [PATCH 4/4] nvme-cli: Add discover connect cmds to main list   Jay Freyensee
• [PATCH 2/4] nvme-cli: Tweak discover summary to match docs   Jay Freyensee
• [PATCH v2 0/7] Introduce blk_quiesce_queue() and blk_resume_queue()   Bart Van Assche
  • [PATCH v2 1/7] blk-mq: Introduce blk_mq_queue_stopped()   Bart Van Assche
  • [PATCH v2 4/7] blk-mq: Introduce blk_quiesce_queue() and blk_resume_queue()   Bart Van Assche
    • [PATCH v2 4/7] blk-mq: Introduce blk_quiesce_queue() and blk_resume_queue()   Hannes Reinecke
    • [PATCH v2 4/7] blk-mq: Introduce blk_quiesce_queue() and blk_resume_queue()   Ming Lei
      • [PATCH v2 4/7] blk-mq: Introduce blk_quiesce_queue() and blk_resume_queue()   Bart Van Assche
  • [PATCH v2 5/7] dm: Fix a race condition related to stopping and starting queues   Bart Van Assche
  • [PATCH v2 6/7] SRP transport: Port srp_wait_for_queuecommand() to scsi-mq   Bart Van Assche
    • [PATCH v2 6/7] SRP transport: Port srp_wait_for_queuecommand() to scsi-mq   Hannes Reinecke
  • [PATCH v2 7/7] [RFC] nvme: Fix a race condition   Bart Van Assche
  • [PATCH v2 2/7] dm: Use BLK_MQ_S_STOPPED instead of QUEUE_FLAG_STOPPED in blk-mq code   Bart Van Assche
  • [PATCH v2 3/7] [RFC] nvme: Use BLK_MQ_S_STOPPED instead of QUEUE_FLAG_STOPPED in blk-mq code   Bart Van Assche
• PROBLEM: nvmet rxe : Kernel oops when running nvmf IO over rdma_rxe   Stephen Bates
• nvme header updates   Christoph Hellwig
  • [PATCH 1/5] nvme.h: resync with nvme-cli   Christoph Hellwig
  • [PATCH 2/5] nvme.h: don't use uuid_be   Christoph Hellwig
  • [PATCH 3/5] nvme.h: add an enum for cns values   Christoph Hellwig
    • [PATCH 3/5] nvme.h: add an enum for cns values   Keith Busch
  • [PATCH 4/5] nvme: use symbolic constants for CNS values   Christoph Hellwig
    • [PATCH 4/5] nvme: use symbolic constants for CNS values   Keith Busch
  • [PATCH 5/5] nvmet: use symbolic constants for CNS values   Christoph Hellwig
  • nvme header updates   Gabriel Krisman Bertazi

Last message date: Fri Sep 30 08:55:59 PDT 2016
Archived on: Fri Sep 30 08:56:38 PDT 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...