February 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Feb 1 00:28:57 PST 2016
Ending: Mon Feb 29 14:30:54 PST 2016
Messages: 504

• [PATCH 1/1] fs:ubifs:recovery:fixup UBIFS cannot recover master node issue   Richard Weinberger
• [PATCH v3 0/5] mtd: atmel_nand: Add support for NAND Flash on SAMA5D2   Romain Izard
  • [PATCH v3 1/5] mtd: atmel_nand: Support variable RB_EDGE interrupts   Romain Izard
  • [PATCH v3 2/5] dt-bindings: atmel_nand: Reword the documenation   Romain Izard
  • [PATCH v3 3/5] mtd: atmel_nand: Support PMECC on SAMA5D2   Romain Izard
  • [PATCH v3 4/5] mtd: atmel_nand: Support 32-bit ECC strength   Romain Izard
  • [PATCH v3 5/5] ARM: at91/dt: sama5d2: add nand0 and nfc0 nodes   Romain Izard
  • [PATCH v3 0/5] mtd: atmel_nand: Add support for NAND Flash on SAMA5D2   Yang, Wenyou
  • [PATCH v3 0/5] mtd: atmel_nand: Add support for NAND Flash on SAMA5D2   Boris Brezillon
    • [PATCH v3 0/5] mtd: atmel_nand: Add support for NAND Flash on SAMA5D2   Romain Izard
• [PATCH 3/3] mtd:spi-nor:fsl-quadspi:Add fast-read mode support   Yunhui Cui
• [PATCH v2 1/4] mtd:fsl-quadspi:use the property fields of SPI-NOR   Yunhui Cui
  • [PATCH v2 2/4] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ   Yunhui Cui
  • [PATCH v2 3/4] mtd:spi-nor:fsl-quadspi:Add fast-read mode support   Yunhui Cui
    • [PATCH v2 3/4] mtd:spi-nor:fsl-quadspi:Add fast-read mode support   Han Xu
      • [PATCH v2 3/4] mtd:spi-nor:fsl-quadspi:Add fast-read mode support   Yunhui Cui
      • [PATCH v2 3/4] mtd:spi-nor:fsl-quadspi:Add fast-read mode support   Han Xu
      • [PATCH v2 3/4] mtd:spi-nor:fsl-quadspi:Add fast-read mode support   Yunhui Cui
      • [PATCH v2 3/4] mtd:spi-nor:fsl-quadspi:Add fast-read mode support   Han Xu
  • [PATCH v2 4/4] mtd:spi_nor: Disable Micron flash HW protection   Yunhui Cui
• [PATCH]jffs2:bugfix for should not appeared directory hard link   David Woodhouse
• JFFS2 deadlock   David Woodhouse
  • JFFS2 deadlock   Thomas.Betker at rohde-schwarz.com
  • JFFS2 deadlock   Thomas.Betker at rohde-schwarz.com
    • JFFS2 deadlock   Joakim Tjernlund
      • JFFS2 deadlock   Thomas.Betker at rohde-schwarz.com
      • JFFS2 deadlock   David Woodhouse
      • JFFS2 deadlock   Brian Norris
• [PATCH v4.4-rc8] jffs2: xattr: Silence frame size warning   David Woodhouse
• [PATCH 21/22] mtd: cs553x: Fix dependencies for !HAS_IOMEM archs   Brian Norris
• [PATCH] mtd: brcmnand: set initial ECC params based on info from HW   Brian Norris
  • [PATCH] mtd: brcmnand: set initial ECC params based on info from HW   Florian Fainelli
    • [PATCH] mtd: brcmnand: set initial ECC params based on info from HW   Brian Norris
      • [PATCH] mtd: brcmnand: set initial ECC params based on info from HW   Florian Fainelli
      • [PATCH] mtd: brcmnand: set initial ECC params based on info from HW   Brian Norris
• [PATCH v2] mtd: nand: pxa3xx_nand: add register access debug   Brian Norris
  • [PATCH v2] mtd: nand: pxa3xx_nand: add register access debug   Robert Jarzmik
• [PATCH 3/3] mtd/ifc: Segregate IFC fcm and runtime registers   Brian Norris
  • [PATCH 3/3] mtd/ifc: Segregate IFC fcm and runtime registers   Li Yang
    • [PATCH 3/3] mtd/ifc: Segregate IFC fcm and runtime registers   Brian Norris
  • [PATCH 3/3] mtd/ifc: Segregate IFC fcm and runtime registers   Scott Wood
  • [PATCH 3/3] mtd/ifc: Segregate IFC fcm and runtime registers   Scott Wood
• [PATCH 1/3] driver/memory: Removal of deprecated NO_IRQ   Brian Norris
• [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Brian Norris
  • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Marek Vasut
    • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Vignesh R
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Marek Vasut
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Dinh Nguyen
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Marek Vasut
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   R, Vignesh
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Marek Vasut
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Vignesh R
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Marek Vasut
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Graham Moore
      • [PATCH V8 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.   Marek Vasut
• [PATCH] mtd: map: fix .set_vpp() documentation   Linus Walleij
  • [PATCH] mtd: map: fix .set_vpp() documentation   Brian Norris
• [PATCH v2 00/17] Add a bakvol module in UBI layer for MLC paired page power loss issue   Bean Huo
  • [PATCH v2 01/17] include:mtd:add multi-plane page program command   Bean Huo
  • [PATCH v2 02/17] include:mtd:add multi-plane program in mtd_info   Bean Huo
  • [PATCH v2 03/17] drivers:mtd:add dual plane page program support in partition layer   Bean Huo
    • [PATCH v2 03/17] drivers:mtd:add dual plane page program support in partition layer   kbuild test robot
  • [PATCH v2 04/17] drivers:mtd:nand:enable dual plane page program function   Bean Huo
    • [PATCH v2 04/17] drivers:mtd:nand:enable dual plane page program function   kbuild test robot
  • [PATCH v2 05/17] drivers:mtd:ubi:add bakvol on-flash and RAM data structures   Bean Huo
  • [PATCH v2 06/17] drivers:mtd:ubi:add bakvol function define in ubi layer   Bean Huo
    • [PATCH v2 06/17] drivers:mtd:ubi:add bakvol function define in ubi layer   kbuild test robot
    • [PATCH v2 06/17] drivers:mtd:ubi:add bakvol function define in ubi layer   kbuild test robot
  • [PATCH v2 07/17] fs:ubifs:add bakvol function define in ubifs layer   Bean Huo
  • [PATCH v2 08/17] drivers:mtd:ubi:disable bakvol function while writing volume table   Bean Huo
  • [PATCH v2 09/17] drivers:mtd:ubi:get PEB according to specfied plane number   Bean Huo
  • [PATCH v2 10/17] drivers:mtd:ubi:enable bakvol function for fastmap operation   Bean Huo
  • [PATCH v2 11/17] drivers:mtd:ubi:add disable/enable bakvol while ubi write   Bean Huo
  • [PATCH v2 12/17] drivers:mtd:ubi:add disable bakvol while ubi detach   Bean Huo
  • [PATCH v2 13/17] drivers:mtd:ubi:add bakvol init while attach ubi   Bean Huo
  • [PATCH v2 14/17] drivers:mtd:ubi:add backup operation in ubi_io_write   Bean Huo
    • [PATCH v2 14/17] drivers:mtd:ubi:add backup operation in ubi_io_write   kbuild test robot
  • [PATCH v2 15/17] fs:ubifs:enable bakvol module and recover operation   Bean Huo
  • [PATCH v2 16/17] driver:mtd:ubi:add new bakvol module in ubi layer   Bean Huo
  • [PATCH v2 17/17] drivers:mtd:ubi: Kconfig Makefile   Bean Huo
    • [PATCH v2 17/17] drivers:mtd:ubi: Kconfig Makefile   kbuild test robot
    • [PATCH v2 17/17] drivers:mtd:ubi: Kconfig Makefile   kbuild test robot
    • [PATCH v2 17/17] drivers:mtd:ubi: Kconfig Makefile   kbuild test robot
      • [PATCH v2 17/17] drivers:mtd:ubi: Kconfig Makefile   Bean Huo 霍斌斌 (beanhuo)
      • [PATCH v2 17/17] drivers:mtd:ubi: Kconfig Makefile   Brian Norris
      • [PATCH v2 17/17] drivers:mtd:ubi: Kconfig Makefile   Bean Huo 霍斌斌 (beanhuo)
  • [PATCH v2 00/17] Add a bakvol module in UBI layer for MLC paired page power loss issue   Richard Weinberger
    • [PATCH v2 00/17] Add a bakvol module in UBI layer for MLC paired page power loss issue   Bean Huo 霍斌斌 (beanhuo)
• [linux-review:Bean-Huo/Add-a-bakvol-module-in-UBI-layer-for-MLC-paired-page-power-loss-issue/20160202-104450] 2078d3920abf1d89be7eaf087100b4482dd532dc BUILD DONE   kbuild test robot
• [PATCH kernel-tests] kbuild: don't CC the list for BUILD DONE notifications   Fengguang Wu
• [PATCH v8 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page   Markus Pargmann
  • [PATCH v8 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page   Han Xu
• [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Raghav Dogra
  • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Li Yang
    • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Scott Wood
      • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Li Yang
      • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Scott Wood
      • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Li Yang
    • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Brian Norris
      • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Scott Wood
      • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Raghav Dogra
      • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Scott Wood
      • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Raghav Dogra
      • [PATCH] mtd/ifc: Add support for IFC controller version 2.0   Scott Wood
• [PATCH v8 0/3] mtd: Qualcomm NAND controller driver   Archit Taneja
  • [PATCH v8 1/3] mtd: nand: don't select chip in nand_chip's block_bad op   Archit Taneja
  • [PATCH v8 2/3] mtd: nand: Qualcomm NAND controller driver   Archit Taneja
    • [PATCH v8 2/3] mtd: nand: Qualcomm NAND controller driver   Boris Brezillon
      • [PATCH v8 2/3] mtd: nand: Qualcomm NAND controller driver   Archit Taneja
      • [PATCH v8 2/3] mtd: nand: Qualcomm NAND controller driver   Archit Taneja
  • [PATCH v8 3/3] dt/bindings: qcom_nandc: Add DT bindings   Archit Taneja
• [PATCH linux-next v2 01/14] mtd: spi-nor: remove micron_quad_enable()   Cyrille Pitchen
  • [PATCH linux-next v2 01/14] mtd: spi-nor: remove micron_quad_enable()   Brian Norris
• [PATCH v3 00/14] mtd: spi-nor: add driver for Atmel QSPI controller   Cyrille Pitchen
  • [PATCH v3 01/14] mtd: spi-nor: remove micron_quad_enable()   Cyrille Pitchen
    • [PATCH v3 01/14] mtd: spi-nor: remove micron_quad_enable()   Brian Norris
  • [PATCH v3 02/14] mtd: spi-nor: properly detect the memory when it boots in Quad or Dual mode   Cyrille Pitchen
  • [PATCH v3 03/14] mtd: spi-nor: select op codes and SPI NOR protocols by manufacturer   Cyrille Pitchen
  • [PATCH v3 04/14] mtd: spi-nor: fix support of Macronix memories   Cyrille Pitchen
  • [PATCH v3 05/14] mtd: spi-nor: fix support of Winbond memories   Cyrille Pitchen
  • [PATCH v3 06/14] mtd: spi-nor: fix support of Micron memories   Cyrille Pitchen
  • [PATCH v3 07/14] mtd: spi-nor: fix support of Spansion memories   Cyrille Pitchen
  • [PATCH v3 08/14] mtd: spi-nor: configure the number of dummy clock cycles by manufacturer   Cyrille Pitchen
  • [PATCH v3 09/14] mtd: spi-nor: configure the number of dummy clock cycles on Micron memories   Cyrille Pitchen
  • [PATCH v3 10/14] mtd: spi-nor: configure the number of dummy clock cycles on Macronix memories   Cyrille Pitchen
  • [PATCH v3 11/14] mtd: spi-nor: configure the number of dummy clock cycles on Spansion memories   Cyrille Pitchen
  • [PATCH v3 12/14] mtd: m25p80: add support of dual and quad spi protocols to all commands   Cyrille Pitchen
  • [PATCH v3 13/14] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver   Cyrille Pitchen
  • [PATCH v3 14/14] mtd: atmel-quadspi: add driver for Atmel QSPI controller   Cyrille Pitchen
• [PATCH v2 00/51] mtd: rework ECC layout definition   Boris Brezillon
  • [PATCH v2 01/51] mtd: kill the ecclayout->oobavail field   Boris Brezillon
  • [PATCH v2 02/51] mtd: create an mtd_oobavail() helper and make use of it   Boris Brezillon
  • [PATCH v2 03/51] mtd: mtdswap: remove useless if (!mtd->ecclayout) test   Boris Brezillon
  • [PATCH v2 04/51] mtd: nand: simplify nand_bch_init() usage   Boris Brezillon
  • [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions   Boris Brezillon
    • [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions   Boris Brezillon
    • [PATCH v2 05/51] mtd: add mtd_ooblayout_xxx() helper functions   Boris Brezillon
  • [PATCH v2 06/51] mtd: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v2 07/51] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
    • [PATCH v2 07/51] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v2 08/51] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v2 09/51] mtd: nand: fsl_ifc: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v2 10/51] mtd: nand: gpmi: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v2 11/51] mtd: nand: lpc32xx: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v2 12/51] mtd: nand: omap2: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v2 13/51] mtd: onenand: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v2 14/51] mtd: add mtd_set_ecclayout() helper function   Boris Brezillon
  • [PATCH v2 15/51] mtd: use mtd_set_ecclayout() where appropriate   Boris Brezillon
  • [PATCH v2 16/51] mtd: nand: use mtd_set_ecclayout() where appropriate   Boris Brezillon
  • [PATCH v2 17/51] mtd: onenand: use mtd_set_ecclayout() where appropriate   Boris Brezillon
  • [PATCH v2 18/51] mtd: docg3: use mtd_set_ecclayout() where appropriate   Boris Brezillon
    • [PATCH v2 18/51] mtd: docg3: use mtd_set_ecclayout() where appropriate   Robert Jarzmik
  • [PATCH v2 19/51] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition   Boris Brezillon
  • [PATCH v2 20/51] mtd: docg3: switch to mtd_ooblayout_ops   Boris Brezillon
    • [PATCH v2 20/51] mtd: docg3: switch to mtd_ooblayout_ops   Robert Jarzmik
  • [PATCH v2 21/51] mtd: nand: implement the default mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 22/51] mtd: nand: bch: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 23/51] mtd: nand: sharpsl: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 24/51] mtd: nand: jz4740: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 25/51] mtd: nand: atmel: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 26/51] mtd: nand: bf5xx: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 27/51] mtd: nand: brcm: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 28/51] mtd: nand: cafe: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 29/51] mtd: nand: davinci: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 30/51] mtd: nand: denali: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 31/51] mtd: nand: diskonchip: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 32/51] mtd: nand: docg4: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 33/51] mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 34/51] mtd: nand: fsl_ifc: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 35/51] mtd: nand: fsmc: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 36/51] mtd: nand: gpmi: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 37/51] mtd: nand: hisi504: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 38/51] mtd: nand: jz4780: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 39/51] mtd: nand: lpc32xx: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 40/51] mtd: nand: mxc: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 41/51] mtd: nand: omap2: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 42/51] mtd: nand: pxa3xx: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 43/51] mtd: nand: s3c2410: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 44/51] mtd: nand: sh_flctl: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 45/51] mtd: nand: sm_common: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 46/51] mtd: nand: sunxi: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 47/51] mtd: nand: vf610: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 48/51] mtd: onenand: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 49/51] staging: mt29f_spinand: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v2 50/51] mtd: nand: kill the ecc->layout field   Boris Brezillon
  • [PATCH v2 51/51] mtd: kill the nand_ecclayout struct   Boris Brezillon
• [PATCH v4 0/5] Tegra 2 NAND Flash Support   Boris Brezillon
• You have new fax, document 000145710   Interfax Online
• [PATCH v6] mtd: spi-nor: add hisilicon spi-nor flash controller driver   Jiancheng Xue
  • [PATCH v6] mtd: spi-nor: add hisilicon spi-nor flash controller driver   Ezequiel Garcia
• [PATCH] mtd: nand: pxa3xx_nand: add support for partial chunks   Ezequiel Garcia
  • [PATCH] mtd: nand: pxa3xx_nand: add support for partial chunks   Robert Jarzmik
• hi Linux   Jeff Stevens
• [PATCH] mtd: denali: fix property name for Denali DT binding   Masahiro Yamada
  • [PATCH] mtd: denali: fix property name for Denali DT binding   Arnd Bergmann
    • [PATCH] mtd: denali: fix property name for Denali DT binding   Masahiro Yamada
      • [PATCH] mtd: denali: fix property name for Denali DT binding   Rob Herring
• brcmnand (iproc): bitflips and ECC errors due to ignored ECC config   Rafał Miłecki
  • brcmnand (iproc): bitflips and ECC errors due to ignored ECC config   Kamal Dasu
    • brcmnand (iproc): bitflips and ECC errors due to ignored ECC config   Brian Norris
      • brcmnand (iproc): bitflips and ECC errors due to ignored ECC config   Kamal Dasu
      • brcmnand (iproc): bitflips and ECC errors due to ignored ECC config   Rafał Miłecki
      • brcmnand (iproc): bitflips and ECC errors due to ignored ECC config   Kamal Dasu
      • brcmnand (iproc): bitflips and ECC errors due to ignored ECC config   Rafał Miłecki
• [PATCH] mtd: spi-nor: Add support for ISSI is25lp128   Nikita Nazarenko
• [PATCH v5 3/5] mtd: devices: m25p80: add support for mmap read request   Mark Brown
  • [PATCH v5 3/5] mtd: devices: m25p80: add support for mmap read request   Vignesh R
    • [PATCH v5 3/5] mtd: devices: m25p80: add support for mmap read request   Mark Brown
      • [PATCH v5 3/5] mtd: devices: m25p80: add support for mmap read request   Vignesh R
      • [PATCH v5 3/5] mtd: devices: m25p80: add support for mmap read request   Mark Brown
      • [PATCH v5 3/5] mtd: devices: m25p80: add support for mmap read request   R, Vignesh
      • [PATCH v5 3/5] mtd: devices: m25p80: add support for mmap read request   Vignesh R
• [PATCH v4 0/5] mtd: atmel_nand: Add support for NAND Flash on SAMA5D2   Romain Izard
  • [PATCH v4 1/5] mtd: atmel_nand: Support variable RB_EDGE interrupts   Romain Izard
    • [PATCH v4 1/5] mtd: atmel_nand: Support variable RB_EDGE interrupts   Brian Norris
  • [PATCH v4 2/5] dt-bindings: atmel_nand: Reword the documentation   Romain Izard
  • [PATCH v4 3/5] mtd: atmel_nand: Support PMECC on SAMA5D2   Romain Izard
  • [PATCH v4 5/5] ARM: at91/dt: sama5d2: add nand0 and nfc0 nodes   Romain Izard
• [PATCH v4 4/5] mtd: atmel_nand: Support 32-bit ECC strength   Romain Izard
  • [PATCH v4 4/5] mtd: atmel_nand: Support 32-bit ECC strength   Brian Norris
• [PATCH v2] mtd: nand: pxa3xx_nand: add support for partial chunks   Thomas Petazzoni
  • [PATCH v2] mtd: nand: pxa3xx_nand: add support for partial chunks   Ezequiel Garcia
    • [PATCH v2] mtd: nand: pxa3xx_nand: add support for partial chunks   Brian Norris
• [PATCH] mtd: spi-nor: Add support for s25fl116k   Sascha Hauer
  • [PATCH v2] mtd: spi-nor: Add support for s25fl116k   Sascha Hauer
    • [PATCH v2] mtd: spi-nor: Add support for s25fl116k   Brian Norris
  • [PATCH] mtd: spi-nor: Add support for s25fl116k   kbuild test robot
• [PATCH] MAINTAINERS: update Han's email   Han Xu
  • [PATCH] MAINTAINERS: update Han's email   Brian Norris
• [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Rafał Miłecki
  • [PATCH 2/3] mtd: nand: read (from DT) and store ECC algorithm   Rafał Miłecki
    • [PATCH 2/3] mtd: nand: read (from DT) and store ECC algorithm   Kamal Dasu
  • [PATCH 3/3] mtd: brcmnand: fix check for Hamming algorithm   Rafał Miłecki
    • [PATCH 3/3] mtd: brcmnand: fix check for Hamming algorithm   Kamal Dasu
  • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Kamal Dasu
  • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Rob Herring
  • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Boris Brezillon
    • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Rafał Miłecki
      • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Boris Brezillon
      • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Rafał Miłecki
      • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Boris Brezillon
      • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Rafał Miłecki
      • [PATCH 1/3] of: mtd: add helper reading "nand-ecc-algo" from DT   Boris Brezillon
• [PATCH linux-next v4 06/11] mtd: bcm63xxpart: Remove dependency on mach-bcm63xx   Brian Norris
• [PATCH linux-next v4 07/11] MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function   Brian Norris
• [PATCH] mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'   Brian Norris
• [PATCH] mtd: nand: pxa3xx_nand: fix dmaengine initialization   Robert Jarzmik
  • [PATCH] mtd: nand: pxa3xx_nand: fix dmaengine initialization   Ezequiel Garcia
    • [PATCH] mtd: nand: pxa3xx_nand: fix dmaengine initialization   Robert Jarzmik
      • [PATCH] mtd: nand: pxa3xx_nand: fix dmaengine initialization   Ezequiel Garcia
• [PATCH 2/6] mtd: physmap_of: add a hook for Versatile write protection   Linus Walleij
  • [PATCH 2/6] mtd: physmap_of: add a hook for Versatile write protection   Linus Walleij
• [PATCH v7] mtd: spi-nor: add hisilicon spi-nor flash controller driver   Jiancheng Xue
• Multiple NANDs on non contiguous chip selects, how?   Sascha Hauer
  • Multiple NANDs on non contiguous chip selects, how?   Boris Brezillon
    • Multiple NANDs on non contiguous chip selects, how?   Sascha Hauer
• [PATCH][v2] mtd/ifc: Add support for IFC controller version 2.0   Raghav Dogra
• [PATCH] mtd: atmel_nand: move the hsmc_clk from nfc node to nand node   Wenyou Yang
  • [PATCH] mtd: atmel_nand: move the hsmc_clk from nfc node to nand node   Nicolas Ferre
    • [PATCH] mtd: atmel_nand: move the hsmc_clk from nfc node to nand node   Yang, Wenyou
• [PATCH][v3] mtd/ifc: Add support for IFC controller version 2.0   Raghav Dogra
  • [PATCH][v3] mtd/ifc: Add support for IFC controller version 2.0   Scott Wood
  • [PATCH][v3] mtd/ifc: Add support for IFC controller version 2.0   Leo Li
    • [PATCH][v3] mtd/ifc: Add support for IFC controller version 2.0   Scott Wood
• [PATCH v4 1/7] mtd: spi-nor: fsl-quadspi: add big-endian support   Han Xu
• [PATCH v4 2/7] mtd: spi-nor: fsl-quadspi: add support for ls1021a   Han Xu
• [PATCH v4 3/7] mtd: spi-nor: fsl-quadspi: add support for layerscape   Han Xu
• [PATCH v4 4/7] Documentation: fsl-quadspi: Add fsl, ls2080a-dspi compatible string   Han Xu
• [PATCH v4 5/7] Documentation: fsl-quadspi: Add fsl, ls2080a-qspi compatible string   Han Xu
• [PATCH v4 6/7] dts/ls2080a: update the DTS for QSPI and DSPI support   Han Xu
• [PATCH v4 7/7] Documentation: fsl-quadspi: Add optional properties   Han Xu
• [PATCH] MAINTAINERS: add maintainer entry for FREESCALE GPMI NAND driver   Han Xu
  • [PATCH] MAINTAINERS: add maintainer entry for FREESCALE GPMI NAND driver   Huang Shijie
    • [PATCH] MAINTAINERS: add maintainer entry for FREESCALE GPMI NAND driver   Brian Norris
• [PATCH v2] mtd: atmel_nand: move the hsmc_clk from nfc node to nand node   Wenyou Yang
• NAND dump questions   Gary Thomas
  • NAND dump questions   Richard Weinberger
    • NAND dump questions   Gary Thomas
      • NAND dump questions   Han Xu
• NAND Bad Block Marking Policy   Guilherme de Oliveira Costa
  • NAND Bad Block Marking Policy   Ricard Wanderlof
  • NAND Bad Block Marking Policy   Ricard Wanderlof
  • NAND Bad Block Marking Policy   Ricard Wanderlof
• [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms   Roger Quadros
  • [PATCH v5 01/26] ARM: OMAP2+: gpmc: Add platform data   Roger Quadros
  • [PATCH v5 02/26] ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data   Roger Quadros
  • [PATCH v5 03/26] memory: omap-gpmc: Introduce GPMC to NAND interface   Roger Quadros
  • [PATCH v5 04/26] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers   Roger Quadros
  • [PATCH v5 05/26] memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status   Roger Quadros
  • [PATCH v5 06/26] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check   Roger Quadros
  • [PATCH v5 07/26] memory: omap-gpmc: Implement IRQ domain for NAND IRQs   Roger Quadros
  • [PATCH v5 08/26] mtd: nand: omap: Copy platform data parameters to omap_nand_info data   Roger Quadros
  • [PATCH v5 09/26] mtd: nand: omap: Clean up device tree support   Roger Quadros
  • [PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation   Roger Quadros
    • [PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation   Rob Herring
      • [PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation   Roger Quadros
  • [PATCH v5 11/26] memory: omap-gpmc: Prevent mapping into 1st 16MB   Roger Quadros
  • [PATCH v5 12/26] memory: omap-gpmc: Move device tree binding to correct location   Roger Quadros
    • [PATCH v5 12/26] memory: omap-gpmc: Move device tree binding to correct location   Rob Herring
      • [PATCH v5 12/26] memory: omap-gpmc: Move device tree binding to correct location   Roger Quadros
  • [PATCH v5 13/26] memory: omap-gpmc: Support general purpose input for WAITPINs   Roger Quadros
  • [PATCH v5 14/26] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring   Roger Quadros
  • [PATCH v5 15/26] memory: omap-gpmc: Support WAIT pin edge interrupts   Roger Quadros
  • [PATCH v5 16/26] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs   Roger Quadros
  • [PATCH v5 17/26] mtd: nand: omap2: Implement NAND ready using gpiolib   Roger Quadros
  • [PATCH v5 18/26] ARM: dts: dra7: Fix NAND device nodes.   Roger Quadros
  • [PATCH v5 19/26] ARM: dts: dra7x-evm: Provide NAND ready pin   Roger Quadros
  • [PATCH v5 20/26] ARM: dts: am437x: Fix NAND device nodes   Roger Quadros
  • [PATCH v5 21/26] ARM: dts: am437x: Provide NAND ready pin   Roger Quadros
  • [PATCH v5 22/26] ARM: dts: am335x: Fix NAND device nodes   Roger Quadros
  • [PATCH v5 23/26] ARM: dts: am335x: Provide NAND ready pin   Roger Quadros
  • [PATCH v5 24/26] ARM: dts: dm814x: Fix gpmc and NAND node   Roger Quadros
  • [PATCH v5 25/26] ARM: dts: dm816x: Fix gpmc and NAND node   Roger Quadros
  • [PATCH v5 26/26] ARM: dts: omap3: Fix gpmc and NAND nodes   Roger Quadros
  • [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms   Tony Lindgren
    • [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms   Roger Quadros
      • [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms   Tony Lindgren
      • [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms   Roger Quadros
      • [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms   nick
  • [PATCH v5 00/26] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms   Roger Quadros
• [PATCH] mtd: onenand: fix deadlock in onenand_block_markbad   Aaro Koskinen
  • [PATCH] mtd: onenand: fix deadlock in onenand_block_markbad   Artem Bityutskiy
• [PATCH v2] mtd: onenand: fix deadlock in onenand_block_markbad   Aaro Koskinen
  • [PATCH v2] mtd: onenand: fix deadlock in onenand_block_markbad   Artem Bityutskiy
  • [PATCH v2] mtd: onenand: fix deadlock in onenand_block_markbad   Brian Norris
• [PATCH] ubifs: Implement O_TMPFILE   Richard Weinberger
  • [PATCH] ubifs: Implement O_TMPFILE   Pavel Machek
    • [PATCH] ubifs: Implement O_TMPFILE   Richard Weinberger
• [PATCH] ubi: Fix out of bounds write in volume update code   Richard Weinberger
  • [PATCH] ubi: Fix out of bounds write in volume update code   Boris Brezillon
• [PATCH RESEND] gpmi-nand: Handle ECC Errors in erased pages   Markus Pargmann
  • [PATCH RESEND] gpmi-nand: Handle ECC Errors in erased pages   Boris Brezillon
• ubifs+overlayfs   Richard Weinberger
  • ubifs+overlayfs   Dave Chinner
    • ubifs+overlayfs   Vivek Goyal
  • ubifs+overlayfs   Pushpal Sidhu
• [PATCH] ARM: tegra: add "jedec,spi-nor" flash compatible binding   Rafał Miłecki
  • [PATCH] ARM: tegra: add "jedec,spi-nor" flash compatible binding   Brian Norris
• [PATCH 1/3] ubi: tests: Replace variable-length array with malloc()   David Gstir
  • [PATCH 3/3] ubi: tests: Speedup io_paral by using rand_r()   David Gstir
• [PATCH 2/3] ubi: tests: Support up to 65k NAND page size   David Gstir
• [PATCH] ubi: Fix early logging   Richard Weinberger
  • [PATCH] ubi: Fix early logging   Joe Perches
    • [PATCH] ubi: Fix early logging   Richard Weinberger
      • [PATCH] mtd: ubi: Add logging functions ubi_msg, ubi_warn and ubi_err   Joe Perches
• [PATCH v3] mtd: atmel_nand: move the hsmc_clk from nfc node to nand node   Wenyou Yang
  • [PATCH v3] mtd: atmel_nand: move the hsmc_clk from nfc node to nand node   Nicolas Ferre
    • [PATCH v3] mtd: atmel_nand: move the hsmc_clk from nfc node to nand node   Brian Norris
      • [PATCH v3] mtd: atmel_nand: move the hsmc_clk from nfc node to nand node   Alexandre Belloni
• [PATCH] ubifs: Add logging functions for ubifs_msg, ubifs_err and ubifs_warn   Joe Perches
• [PATCH v6] mtd: support BB SRAM on ICP DAS LP-8x4x   Sergei Ianovich
  • [PATCH v6] mtd: support BB SRAM on ICP DAS LP-8x4x   Rob Herring
• [PATCH V2] ubifs: Add logging functions for ubifs_msg, ubifs_err and ubifs_warn   Joe Perches
• [PATCH 0/5] support gpmi on i.MX6UL/7D and HW bitflip on i.MX6QP/7D   Han Xu
  • [PATCH 1/5] mtd: nand: gpmi: add GPMI NAND support for i.MX7D   Han Xu
  • [PATCH 2/5] mtd: nand: gpmi: document the clocks and clock-names in DT property   Han Xu
  • [PATCH 3/5] mtd: nand: gpmi: correct bitflip for erased NAND page   Han Xu
  • [PATCH 4/5] mtd: nand: gpmi: support NAND on i.MX6UL   Han Xu
  • [PATCH 5/5] mtd: nand: gpmi: document the new supported chip in DT   Han Xu
• [PATCH 00/35 v4] separate operations from flags in the bio/request structs   mchristi at redhat.com
  • [PATCH 01/35] block/fs/drivers: remove rw argument from submit_bio   mchristi at redhat.com
  • [PATCH 02/35] block: add REQ_OP definitions and bi_op/op fields   mchristi at redhat.com
  • [PATCH 03/35] block, fs, mm, drivers: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 04/35] fs: have submit_bh users pass in op and flags separately   mchristi at redhat.com
  • [PATCH 05/35] fs: have ll_rw_block users pass in op and flags separately   mchristi at redhat.com
  • [PATCH 06/35] direct-io: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 07/35] btrfs: have submit_one_bio users setup bio bi_op   mchristi at redhat.com
  • [PATCH 08/35] btrfs: set bi_op tp REQ_OP   mchristi at redhat.com
  • [PATCH 09/35] btrfs: update __btrfs_map_block for bi_op transition   mchristi at redhat.com
  • [PATCH 10/35] btrfs: don't pass rq_flag_bits if there is a bio   mchristi at redhat.com
  • [PATCH 11/35] f2fs: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 12/35] gfs2: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 13/35] xfs: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 14/35] hfsplus: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 15/35] mpage: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 16/35] nilfs: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 17/35] ocfs2: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 18/35] pm: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 19/35] dm: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 20/35] dm: pass dm stats data dir instead of bi_rw   mchristi at redhat.com
  • [PATCH 21/35] bcache: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 22/35] drbd: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 23/35] md/raid: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 24/35] xen: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 25/35] target: set bi_op to REQ_OP   mchristi at redhat.com
  • [PATCH 26/35] block: set op to REQ_OP   mchristi at redhat.com
    • [PATCH 26/35] block: set op to REQ_OP   kbuild test robot
  • [PATCH 27/35] drivers: set request op to REQ_OP   mchristi at redhat.com
  • [PATCH 28/35] blktrace: get op from req->op/bio->bi_op   mchristi at redhat.com
  • [PATCH 29/35] ide cd: do not set REQ_WRITE on requests.   mchristi at redhat.com
  • [PATCH 30/35] block, fs, drivers: do not test bi_rw for REQ_OPs   mchristi at redhat.com
  • [PATCH 31/35] block, fs: remove old REQ definitions.   mchristi at redhat.com
    • [PATCH 31/35] block, fs: remove old REQ definitions.   kbuild test robot
  • [PATCH 32/35] block: shrink bi_rw and bi_op   mchristi at redhat.com
  • [PATCH 33/35] block, drivers: add REQ_OP_FLUSH operation   mchristi at redhat.com
  • [PATCH 34/35] block: add QUEUE_FLAGs for flush and fua   mchristi at redhat.com
  • [PATCH 35/35] block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH   mchristi at redhat.com
  • [PATCH 00/35 v4] separate operations from flags in the bio/request structs   Christoph Hellwig
    • [PATCH 00/35 v4] separate operations from flags in the bio/request structs   Mike Christie
• Filesystems over UBI can't handle badblocks   Guilherme de Oliveira Costa
  • Filesystems over UBI can't handle badblocks   Richard Weinberger
    • Filesystems over UBI can't handle badblocks   Ricard Wanderlof
  • Filesystems over UBI can't handle badblocks   Artem Bityutskiy
    • Filesystems over UBI can't handle badblocks   Richard Weinberger
      • Filesystems over UBI can't handle badblocks   Artem Bityutskiy
  • Filesystems over UBI can't handle badblocks   Richard Weinberger
• [PATCH] mtd: brcmnand: Fix v7.1 register offsets   Florian Fainelli
  • [PATCH] mtd: brcmnand: Fix v7.1 register offsets   Brian Norris
• [PATCH] jffs2: Don't add summary entry when MTD write fails   David Woodhouse
  • [PATCH] jffs2: Don't add summary entry when MTD write fails   Thomas.Betker at rohde-schwarz.com
• [PATCH v7] mtd: nand: increase ready wait timeout and report timeouts   Richard Weinberger
  • [PATCH v7] mtd: nand: increase ready wait timeout and report timeouts   Brian Norris
    • [PATCH v7] mtd: nand: increase ready wait timeout and report timeouts   Boris Brezillon
      • [PATCH v7] mtd: nand: increase ready wait timeout and report timeouts   Richard Weinberger
      • [PATCH v7] mtd: nand: increase ready wait timeout and report timeouts   Harvey Hunt
• [PATCH v2] clk: uniphier: add clock drivers for UniPhier SoCs   Stephen Boyd
• [PATCH v3 00/52] mtd: rework ECC layout definition   Boris Brezillon
  • [PATCH v3 01/52] mtd: kill the ecclayout->oobavail field   Boris Brezillon
  • [PATCH v3 02/52] mtd: create an mtd_oobavail() helper and make use of it   Boris Brezillon
  • [PATCH v3 03/52] mtd: mtdswap: remove useless if (!mtd->ecclayout) test   Boris Brezillon
  • [PATCH v3 04/52] mtd: nand: simplify nand_bch_init() usage   Boris Brezillon
  • [PATCH v3 05/52] mtd: add mtd_ooblayout_xxx() helper functions   Boris Brezillon
  • [PATCH v3 06/52] mtd: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v3 07/52] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
    • [PATCH v3 07/52] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate   Harvey Hunt
      • [PATCH v3 07/52] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
      • [PATCH v3 07/52] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate   Harvey Hunt
      • [PATCH v3 07/52] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
      • [PATCH v3 07/52] mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate   Harvey Hunt
  • [PATCH v3 08/52] mtd: nand: atmel: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v3 09/52] mtd: nand: fsl_ifc: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v3 10/52] mtd: nand: gpmi: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v3 11/52] mtd: nand: lpc32xx: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v3 12/52] mtd: nand: omap2: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v3 13/52] mtd: onenand: use mtd_ooblayout_xxx() helpers where appropriate   Boris Brezillon
  • [PATCH v3 14/52] mtd: add mtd_set_ecclayout() helper function   Boris Brezillon
  • [PATCH v3 15/52] mtd: use mtd_set_ecclayout() where appropriate   Boris Brezillon
  • [PATCH v3 16/52] mtd: nand: use mtd_set_ecclayout() where appropriate   Boris Brezillon
  • [PATCH v3 17/52] mtd: onenand: use mtd_set_ecclayout() where appropriate   Boris Brezillon
  • [PATCH v3 18/52] mtd: docg3: use mtd_set_ecclayout() where appropriate   Boris Brezillon
  • [PATCH v3 19/52] mtd: create an mtd_ooblayout_ops struct to ease ECC layout definition   Boris Brezillon
  • [PATCH v3 20/52] mtd: docg3: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 21/52] mtd: nand: implement the default mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 22/52] mtd: nand: bch: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 23/52] mtd: nand: sharpsl: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 24/52] mtd: nand: jz4740: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 25/52] mtd: nand: atmel: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 26/52] mtd: nand: bf5xx: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 27/52] mtd: nand: brcm: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 28/52] mtd: nand: cafe: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 29/52] mtd: nand: davinci: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 30/52] mtd: nand: denali: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 31/52] mtd: nand: diskonchip: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 32/52] mtd: nand: docg4: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 33/52] mtd: nand: fsl_elbc: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 34/52] mtd: nand: fsl_ifc: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 35/52] mtd: nand: fsmc: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 36/52] mtd: nand: fsmc: get rid of the fsmc_nand_eccplace struct   Boris Brezillon
  • [PATCH v3 37/52] mtd: nand: gpmi: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 38/52] mtd: nand: hisi504: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 39/52] mtd: nand: jz4780: switch to mtd_ooblayout_ops   Boris Brezillon
    • [PATCH v3 39/52] mtd: nand: jz4780: switch to mtd_ooblayout_ops   Harvey Hunt
  • [PATCH v3 40/52] mtd: nand: lpc32xx: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 41/52] mtd: nand: mxc: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 42/52] mtd: nand: omap2: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 43/52] mtd: nand: pxa3xx: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 44/52] mtd: nand: s3c2410: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 45/52] mtd: nand: sh_flctl: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 46/52] mtd: nand: sm_common: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 47/52] mtd: nand: sunxi: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 48/52] mtd: nand: vf610: switch to mtd_ooblayout_ops   Boris Brezillon
    • [PATCH v3 48/52] mtd: nand: vf610: switch to mtd_ooblayout_ops   Stefan Agner
      • [PATCH v3 48/52] mtd: nand: vf610: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 49/52] mtd: onenand: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 50/52] staging: mt29f_spinand: switch to mtd_ooblayout_ops   Boris Brezillon
  • [PATCH v3 51/52] mtd: nand: kill the ecc->layout field   Boris Brezillon
  • [PATCH v3 52/52] mtd: kill the nand_ecclayout struct   Boris Brezillon
  • [PATCH v3 00/52] mtd: rework ECC layout definition   Stefan Agner
    • [PATCH v3 00/52] mtd: rework ECC layout definition   Boris Brezillon
• No subject   Fredrick Prashanth John Berchmans
  • No subject   Richard Weinberger
• LOAN OFFER   Alvin Scott
• [RESEND PATCH v7] mtd: spi-nor: add hisilicon spi-nor flash controller driver   Jiancheng Xue
• [PATCH] mtd: bcm47xxsflash: use ioremap_cachable() instead of KSEG0ADDR()   Rafał Miłecki
  • [PATCH] mtd: bcm47xxsflash: use ioremap_cachable() instead of KSEG0ADDR()   Maciej W. Rozycki
    • [PATCH] mtd: bcm47xxsflash: use ioremap_cachable() instead of KSEG0ADDR()   Rafał Miłecki
• [PATCH V2] mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR()   Rafał Miłecki
• [PATCH v2 0/3] fix memremap on ARM   Ard Biesheuvel
  • [PATCH v2 1/3] Revert "mtd: pxa2xx-flash: switch from ioremap_cache to memremap"   Ard Biesheuvel
  • [PATCH v2 2/3] memremap: add arch specific hook for MEMREMAP_WB mappings   Ard Biesheuvel
  • [PATCH v2 3/3] ARM: memremap: implement arch_memremap_wb()   Ard Biesheuvel
• [PATCH v2 0/8] mtd: spi-nor: locking fixes and updates   Ezequiel Garcia
• [PATCH] mtd: spi-nor: update flags for n25q128a   Ezequiel Garcia
  • [PATCH] mtd: spi-nor: update flags for n25q128a   Rafał Miłecki
    • [PATCH] mtd: spi-nor: update flags for n25q128a   Ezequiel Garcia
• [PATCH 0/2] mtd: m25p80: make use of recently introduced max_transfer_size in SPI core   Heiner Kallweit
• [PATCH 1/2] mtd: m25p80: fix retlen usage in m25p80_read and propagate errors   Heiner Kallweit
• [PATCH 2/2] mtd: m25p80: consider max_transfer_size when reading   Heiner Kallweit
• [PATCH v2] mtd: spi-nor: add subsector flag to n25q128a   Ezequiel Garcia
• [PATCH v2 6/8] mtd: spi-nor: add SPI_NOR_HAS_LOCK flag   Ezequiel Garcia
• [PATCH v2] mtd: avoid stack overflow in MTD CFI code   Arnd Bergmann
• R: Brown's new order   info at torpildenizinsaat.com
• [PATCH v2 7/8] mtd: spi-nor: add TB (Top/Bottom) protect support   Ezequiel Garcia
• jffs2: Improve post-mount CRC scan efficiency   Woodhouse, David

Last message date: Mon Feb 29 14:30:54 PST 2016
Archived on: Mon Feb 29 14:31:20 PST 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...