[PATCH v2 11/17] drivers:mtd:ubi:add disable/enable bakvol while ubi write
Bean Huo
jackyard88 at gmail.com
Mon Feb 1 18:30:46 PST 2016
From: Bean Huo <beanhuo at micron.com>
This patch is to modify ubi write action, add disable/enable backup operation according
to data type. For EC header, VID header,master node,super block writing,
bakvol module will not backup these data into bakvol volume.
Signed-off-by: BeanHuo <beanhuo at micron.com>
---
drivers/mtd/ubi/eba.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 51bca03..0f1f8a5 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -604,7 +604,7 @@ retry:
memcpy(ubi->peb_buf + offset, buf, len);
- err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
+ err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size, 0);
if (err) {
mutex_unlock(&ubi->buf_mutex);
up_read(&ubi->fm_eba_sem);
@@ -675,7 +675,7 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
dbg_eba("write %d bytes at offset %d of LEB %d:%d, PEB %d",
len, offset, vol_id, lnum, pnum);
- err = ubi_io_write_data(ubi, buf, pnum, offset, len);
+ err = ubi_io_write_data(ubi, buf, pnum, offset, len, ((lnum < 3) ? 0 : 1));
if (err) {
ubi_warn(ubi, "failed to write data to PEB %d", pnum);
if (err == -EIO && ubi->bad_allowed)
@@ -726,7 +726,7 @@ retry:
}
if (len) {
- err = ubi_io_write_data(ubi, buf, pnum, offset, len);
+ err = ubi_io_write_data(ubi, buf, pnum, offset, len, ((lnum < 3) ? 0 : 1));
if (err) {
ubi_warn(ubi, "failed to write %d bytes at offset %d of LEB %d:%d, PEB %d",
len, offset, vol_id, lnum, pnum);
@@ -848,7 +848,7 @@ retry:
goto write_error;
}
- err = ubi_io_write_data(ubi, buf, pnum, 0, len);
+ err = ubi_io_write_data(ubi, buf, pnum, 0, len, ((lnum < 3) ? 0:1));
if (err) {
ubi_warn(ubi, "failed to write %d bytes of data to PEB %d",
len, pnum);
@@ -968,7 +968,7 @@ retry:
goto write_error;
}
- err = ubi_io_write_data(ubi, buf, pnum, 0, len);
+ err = ubi_io_write_data(ubi, buf, pnum, 0, len, ((lnum < 3) ? 0 : 1));
if (err) {
ubi_warn(ubi, "failed to write %d bytes of data to PEB %d",
len, pnum);
@@ -1194,7 +1194,8 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
}
if (data_size > 0) {
- err = ubi_io_write_data(ubi, ubi->peb_buf, to, 0, aldata_size);
+ err = ubi_io_write_data(ubi, ubi->peb_buf, to, 0, aldata_size,
+ ((lnum < 3) ? 0 : 1));
if (err) {
if (err == -EIO)
err = MOVE_TARGET_WR_ERR;
--
1.9.1
More information about the linux-mtd
mailing list