February 2017 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Feb 1 09:47:26 PST 2017
Ending: Tue Feb 28 15:12:38 PST 2017
Messages: 258

• [PATCH] Documentation: devicetree: meson-ir: "linux, rc-map-name" is supported   Rob Herring
• [PATCH] Documentation: devicetree: meson-ir: "linux, rc-map-name" is supported   Andreas Färber
• [PATCH] net: stmmac: don't set tx delay in RGMII_ID and RGMII_TXID mode   Heiner Kallweit
• [PATCH] net: stmmac: add separate warning for PTP not being supported by HW   Heiner Kallweit
• [PATCH v2] Documentation: devicetree: meson-ir: "linux, rc-map-name" is supported   Martin Blumenstingl
• [PATCH v2] Documentation: devicetree: meson-ir: "linux,rc-map-name" is supported   Martin Blumenstingl
• [PATCH v2] Documentation: devicetree: meson-ir: "linux,rc-map-name" is supported   Sean Young
• [PATCH 0/2] drm: meson: Fixup driver and module name   Neil Armstrong
• [PATCH 1/2] drm: meson: rename module name to meson-drm   Neil Armstrong
• [PATCH 2/2] drm: meson: rename driver name to meson-drm   Neil Armstrong
• [PATCH 2/2] drm: meson: rename driver name to meson-drm   Daniel Vetter
• [PATCH 2/2] drm: meson: rename driver name to meson-drm   Neil Armstrong
• [PATCH 2/2] drm: meson: rename driver name to meson-drm   Daniel Vetter
• [PATCH v2] Documentation: devicetree: meson-ir: "linux,rc-map-name" is supported   Andreas Färber
• [PATCH] net: stmmac: don't set tx delay in RGMII_ID and RGMII_TXID mode   David Miller
• [PATCH] net: stmmac: add separate warning for PTP not being supported by HW   David Miller
• [PATCH] mmc: meson: Assign the minimum clk rate as close to 100KHz as possible   Ulf Hansson
• [PATCH v2 1/9] mmc: meson-gx: fix setting f_min   Ulf Hansson
• [PATCH v2 4/9] mmc: meson-gx: improve meson_mmc_irq_thread   Kevin Hilman
• [PATCH v2 5/9] mmc: meson-gx: improve interrupt handling   Kevin Hilman
• [PATCH] mmc: meson: Assign the minimum clk rate as close to 100KHz as possible   Kevin Hilman
• [PATCH v2 7/9] mmc: meson-gx: reduce bounce buffer size   Kevin Hilman
• [PATCH v2 8/9] mmc: meson-gx: remove unneeded checks in remove   Kevin Hilman
• [GIT PULL] Amlogic 64-bit DT updates for v4.11, round 2   Kevin Hilman
• [PATCH] net: stmmac: don't set tx delay in RGMII_ID and RGMII_TXID mode   Martin Blumenstingl
• [PATCH] phy: meson8b-usb2: fix offsets for some of the registers   Martin Blumenstingl
• [PATCH 0/2] scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Heiner Kallweit
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Heiner Kallweit
• [PATCH 2/2] cpufreq: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Heiner Kallweit
• [PATCH v2 1/9] mmc: meson-gx: fix setting f_min   Heiner Kallweit
• [PATCH v2 1/9] mmc: meson-gx: fix setting f_min   Martin Blumenstingl
• [PATCH v2 1/9] mmc: meson-gx: fix setting f_min   Heiner Kallweit
• [PATCH 0/2] scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Neil Armstrong
• [PATCH] ARM64: dts: meson-gxbb: set reset for ethernet   Neil Armstrong
• [PATCH] mmc: meson-gx: add support for HS400 mode   Neil Armstrong
• [PATCH 0/2] scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Heiner Kallweit
• [PATCH] mmc: meson-gx: add support for HS400 mode   Heiner Kallweit
• [PATCH] ARM64: dts: meson-gxbb: set reset for ethernet   Heiner Kallweit
• [PATCH v3 1/9] mmc: meson: Assign the minimum clk rate as close to 400KHz as possible   Heiner Kallweit
• [PATCH v3 2/9] mmc: meson-gx: minor improvements in meson_mmc_set_ios   Heiner Kallweit
• [PATCH v3 3/9] mmc: meson-gx: improve meson_mmc_clk_set   Heiner Kallweit
• [PATCH v3 4/9] mmc: meson-gx: improve meson_mmc_irq_thread   Heiner Kallweit
• [PATCH v3 5/9] mmc: meson-gx: improve interrupt handling   Heiner Kallweit
• [PATCH v3 6/9] mmc: meson-gx: set max block count and request size   Heiner Kallweit
• [PATCH v3 7/9] mmc: meson-gx: reduce bounce buffer size   Heiner Kallweit
• [PATCH v3 8/9] mmc: meson-gx: remove unneeded checks in remove   Heiner Kallweit
• [PATCH v3 9/9] mmc: meson-gx: add support for HS400 mode   Heiner Kallweit
• [PATCH 0/4] reset: de-modularize the remaining reset drivers   Paul Gortmaker
• [PATCH 3/4] reset: meson: make it explicitly non-modular   Paul Gortmaker
• [PATCH 3/4] reset: meson: make it explicitly non-modular   Neil Armstrong
• [PATCH] ARM64: dts: meson-gxbb: set reset for ethernet   Neil Armstrong
• [PATCH v3 9/9] mmc: meson-gx: add support for HS400 mode   Neil Armstrong
• [PATCH 0/4] reset: de-modularize the remaining reset drivers   Philipp Zabel
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Sudeep Holla
• [PATCH v3 1/9] mmc: meson: Assign the minimum clk rate as close to 400KHz as possible   Ulf Hansson
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Kevin Hilman
• [PATCH 0/4] mmc: add pwrseq-based hw_reset   Heiner Kallweit
• [PATCH 1/4] mmc: pwrseq: add op reset to struct mmc_pwrseq_ops   Heiner Kallweit
• [PATCH 2/4] mmc: pwrseq: implement reset operation in pwrseq_emmc   Heiner Kallweit
• [PATCH 3/4] mmc: meson-gx: add pwrseq-based hw_reset   Heiner Kallweit
• [PATCH 4/4] ARM64: dts: meson-gxbb-odroidc2: add hw-reset capability flag for emmc port   Heiner Kallweit
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Sudeep Holla
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Michał Zegan
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Sudeep Holla
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Michał Zegan
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Neil Armstrong
• [PATCH 1/2] clk: scpi: RfC - Allow to ignore invalid SCPI DVFS clock rates   Sudeep Holla
• [PATCH] ARM64: dts: meson-gxbb-odroidc2: switch ethernet phy mode to rgmii-txid   Heiner Kallweit
• [PATCH] phy: meson8b-usb2: fix offsets for some of the registers   Jerome Brunet
• [PATCH 0/2] meson-gxbb: Add mali-450 support   Neil Armstrong
• [PATCH 1/2] clk: meson-gxbb: Add MALI clocks and fix GP0 pll support   Neil Armstrong
• [PATCH 2/2] ARM64: dts: meson-gxbb: Add Mali node   Neil Armstrong
• [PATCH 0/2] Add support for HwaCom AmazeTV   Carlo Caione
• [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Carlo Caione
• [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Carlo Caione
• [PATCH 00/18] mmc: meson-gx: code and performance improvements   Heiner Kallweit
• [PATCH 01/18] mmc: meson-gx: set segment host parameters   Heiner Kallweit
• [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23   Heiner Kallweit
• [PATCH 03/18] mmc: meson-gx: explicitely call stop command for multi-block commands only   Heiner Kallweit
• [PATCH 04/18] mmc: meson-gx: improve meson_mmc_start_cmd   Heiner Kallweit
• [PATCH 05/18] mmc: meson-gx: eliminate struct sd_emmc_data   Heiner Kallweit
• [PATCH 06/18] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Heiner Kallweit
• [PATCH 07/18] mmc: meson-gx: check return value of sg_copy_[from,to]_buffer   Heiner Kallweit
• [PATCH 08/18] mmc: meson-gx: make two functions return void   Heiner Kallweit
• [PATCH 09/18] mmc: meson-gx: change interrupt name   Heiner Kallweit
• [PATCH 10/18] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host   Heiner Kallweit
• [PATCH 11/18] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init   Heiner Kallweit
• [PATCH 12/18] mmc: meson-gx: remove member parent_mux from struct meson_host   Heiner Kallweit
• [PATCH 13/18] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Heiner Kallweit
• [PATCH 14/18] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init   Heiner Kallweit
• [PATCH 15/18] mmc: meson-gx: improve initial configuration   Heiner Kallweit
• [PATCH 16/18] mmc: meson-gx: improve response reading and sending stop command   Heiner Kallweit
• [PATCH 17/18] mmc: meson-gx: remove member mrq from struct meson_host   Heiner Kallweit
• [PATCH 18/18] mmc: meson-gx: move handling of one case from threaded handler to main irq   Heiner Kallweit
• [PATCH] ARM64: dts: meson-gxbb-odroidc2: Enable SARADC node   Heiner Kallweit
• [PATCH 09/18] mmc: meson-gx: change interrupt name   Ben Dooks
• [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23   Kevin Hilman
• [PATCH 04/18] mmc: meson-gx: improve meson_mmc_start_cmd   Kevin Hilman
• [PATCH 05/18] mmc: meson-gx: eliminate struct sd_emmc_data   Kevin Hilman
• [PATCH 06/18] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Kevin Hilman
• [PATCH 07/18] mmc: meson-gx: check return value of sg_copy_[from, to]_buffer   Kevin Hilman
• [PATCH 08/18] mmc: meson-gx: make two functions return void   Kevin Hilman
• [PATCH 09/18] mmc: meson-gx: change interrupt name   Kevin Hilman
• [PATCH 10/18] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host   Kevin Hilman
• [PATCH] reset: fix shared reset triggered_count decrement on error   Jerome Brunet
• [PATCH 11/18] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init   Kevin Hilman
• [PATCH 12/18] mmc: meson-gx: remove member parent_mux from struct meson_host   Kevin Hilman
• [PATCH 13/18] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Kevin Hilman
• [PATCH 14/18] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init   Kevin Hilman
• [PATCH 15/18] mmc: meson-gx: improve initial configuration   Kevin Hilman
• [PATCH 16/18] mmc: meson-gx: improve response reading and sending stop command   Kevin Hilman
• [PATCH 14/18] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init   Heiner Kallweit
• [PATCH 17/18] mmc: meson-gx: remove member mrq from struct meson_host   Kevin Hilman
• [PATCH 13/18] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Heiner Kallweit
• [PATCH 04/18] mmc: meson-gx: improve meson_mmc_start_cmd   Heiner Kallweit
• [PATCH 09/18] mmc: meson-gx: change interrupt name   Heiner Kallweit
• [PATCH 00/18] mmc: meson-gx: code and performance improvements   Kevin Hilman
• [PATCH] reset: fix shared reset triggered_count decrement on error   Martin Blumenstingl
• [PATCH 00/18] mmc: meson-gx: code and performance improvements   Heiner Kallweit
• [PATCH 04/18] mmc: meson-gx: improve meson_mmc_start_cmd   Heiner Kallweit
• [PATCH 13/18] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Kevin Hilman
• [PATCH 04/18] mmc: meson-gx: improve meson_mmc_start_cmd   Kevin Hilman
• [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23   Heiner Kallweit
• [PATCH 13/18] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Heiner Kallweit
• [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23   Ulf Hansson
• [PATCH] reset: fix shared reset triggered_count decrement on error   Philipp Zabel
• [PATCH 0/2] mmc: meson-gx: fix mmc module unloading   Michał Zegan
• [PATCH 0/2] mmc: meson-gx: fix mmc module unloading   Michał Zegan
• [PATCH 0/2] mmc: meson-gx: fix module unloading   Michał Zegan
• [PATCH 1/2] mmc: meson-gx: prevent cfg_div_clk from being disabled on init   Michał Zegan
• [PATCH 2/2] mmc: meson-gx: remove mmc host on device removal   Michał Zegan
• [PATCH v3 0/2] drm: Support framebuffer panning   Neil Armstrong
• [GIT PULL] Amlogic 64-bit DT updates for v4.11, round 2   Arnd Bergmann
• [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23   Heiner Kallweit
• [PATCH v2 0/9] mmc: meson-gx: series with smaller improvements   Heiner Kallweit
• [PATCH v2 1/9] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Heiner Kallweit
• [PATCH v2 2/9] mmc: meson-gx: make two functions return void   Heiner Kallweit
• [PATCH v2 3/9] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host   Heiner Kallweit
• [PATCH v2 4/9] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init   Heiner Kallweit
• [PATCH v2 5/9] mmc: meson-gx: remove member parent_mux from struct meson_host   Heiner Kallweit
• [PATCH v2 6/9] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Heiner Kallweit
• [PATCH v2 7/9] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init   Heiner Kallweit
• [PATCH v2 8/9] mmc: meson-gx: improve initial configuration   Heiner Kallweit
• [PATCH v2 9/9] mmc: meson-gx: remove member mrq from struct meson_host   Heiner Kallweit
• [PATCH 1/2] mmc: meson-gx: prevent cfg_div_clk from being disabled on init   Kevin Hilman
• [PATCH 2/2] mmc: meson-gx: remove mmc host on device removal   Kevin Hilman
• [PATCH 1/2] mmc: meson-gx: prevent cfg_div_clk from being disabled on init   Michał Zegan
• [PATCH 2/2] mmc: meson-gx: remove mmc host on device removal   Michał Zegan
• [PATCH v2 6/9] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Kevin Hilman
• [PATCH 2/2] mmc: meson-gx: remove mmc host on device removal   Kevin Hilman
• [PATCH v2 6/9] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Michał Zegan
• [PATCH v2 6/9] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Heiner Kallweit
• [PATCH v2 6/9] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Heiner Kallweit
• [PATCH v2 6/9] mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init   Michał Zegan
• [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd   Heiner Kallweit
• [PATCH v3 2/10] mmc: meson-gx: make two functions return void   Heiner Kallweit
• [PATCH v3 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host   Heiner Kallweit
• [PATCH v3 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init   Heiner Kallweit
• [PATCH v3 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host   Heiner Kallweit
• [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe   Heiner Kallweit
• [PATCH v3 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init   Heiner Kallweit
• [PATCH v3 8/10] mmc: meson-gx: improve initial configuration   Heiner Kallweit
• [PATCH v3 9/10] mmc: meson-gx: remove member mrq from struct meson_host   Heiner Kallweit
• [PATCH v3 10/10] mmc: meson-gx: replace magic timeout numbers with constants   Heiner Kallweit
• [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe   Michał Zegan
• [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe   Heiner Kallweit
• [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe   Michał Zegan
• [PATCH] mmc: meson-gx: fix error path when driver initialization fails before enabling clocks   Michał Zegan
• [PATCH v2] mmc: meson-gx: remove mmc host on device removal   Michał Zegan
• [PATCH 02/18] mmc: meson-gx: remove code for unsupported CMD23   Heiner Kallweit
• [PATCH 04/18] mmc: meson-gx: improve meson_mmc_start_cmd   Heiner Kallweit
• [PATCH 0/2] hwrng: meson: add clock handling   Heiner Kallweit
• [PATCH 1/2] hwrng: meson: expose RNG0 clock via DT   Heiner Kallweit
• [PATCH 2/2] hwrng: meson: add clock handling to driver   Heiner Kallweit
• [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay   Martin Blumenstingl
• [PATCH v5 1/9] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO   Martin Blumenstingl
• [PATCH v5 2/9] ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO   Martin Blumenstingl
• [PATCH v5 3/9] ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO   Martin Blumenstingl
• [PATCH v5 4/9] ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO   Martin Blumenstingl
• [PATCH v5 5/9] ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO   Martin Blumenstingl
• [PATCH v5 6/9] ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO   Martin Blumenstingl
• [PATCH v5 7/9] ARM64: dts: meson-gxbb-p201: fix ethernet support   Martin Blumenstingl
• [PATCH v5 8/9] ARM64: dts: amlogic: add the ethernet TX delay configuration   Martin Blumenstingl
• [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx   Martin Blumenstingl
• [PATCH 0/1] ARM64: defconfig: add support for PWM LEDs   Martin Blumenstingl
• [PATCH 1/1] ARM64: defconfig: enable the leds-pwm driver and default-on trigger   Martin Blumenstingl
• [PATCH 0/1] meson-gxl: improve support for the P212 board   Martin Blumenstingl
• [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design   Martin Blumenstingl
• [PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay   Jerome Brunet
• [PATCH 1/2] hwrng: meson: expose RNG0 clock via DT   Jerome Brunet
• [PATCH 2/2] hwrng: meson: add clock handling to driver   PrasannaKumar Muralidharan
• [PATCH 0/2] hwrng: meson: add clock handling   Neil Armstrong
• [PATCH v2 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Heiner Kallweit
• [PATCH v2 2/3] ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node   Heiner Kallweit
• [PATCH v2 3/3] hwrng: meson: add clock handling to driver   Heiner Kallweit
• [PATCH v2 2/3] ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node   Neil Armstrong
• [PATCH v2 3/3] hwrng: meson: add clock handling to driver   Neil Armstrong
• [PATCH v2 3/3] hwrng: meson: add clock handling to driver   Heiner Kallweit
• [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Heiner Kallweit
• [PATCH v3 2/4] ARM64: dts: meson-gx: add clock to DT binding documentation for hwrng   Heiner Kallweit
• [PATCH v3 3/4] ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node   Heiner Kallweit
• [PATCH v3 4/4] hwrng: meson: add clock handling to driver   Heiner Kallweit
• [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Rob Herring
• [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Rob Herring
• [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Carlo Caione
• [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Andreas Färber
• [PATCH 0/2] Add support for HwaCom AmazeTV   Carlo Caione
• [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Carlo Caione
• [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Carlo Caione
• [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Rob Herring
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   kernel test robot
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Linus Torvalds
• media / serial_ir: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Linus Torvalds
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Ingo Molnar
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Sean Young
• [PATCH] [media] serial_ir: ensure we're ready to receive interrupts   Sean Young
• [PATCH] [media] serial_ir: ensure we're ready to receive interrupts   Mauro Carvalho Chehab
• [PATCH] [media] serial_ir: ensure we're ready to receive interrupts   Mauro Carvalho Chehab
• [PATCH v3 resend] [media] serial_ir: ensure we're ready to receive interrupts   Mauro Carvalho Chehab
• [PATCH v3 resend] [media] serial_ir: ensure we're ready to receive interrupts   Mauro Carvalho Chehab
• [PATCH v3.1] [media] serial_ir: ensure we're ready to receive interrupts   Mauro Carvalho Chehab
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Linus Torvalds
• [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Kevin Hilman
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Thomas Gleixner
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Thomas Gleixner
• [PATCH v3 1/3] clk: meson-gxbb: expose clock CLKID_RNG0   Neil Armstrong
• [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Rob Herring
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Ingo Molnar
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Tony Lindgren
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Thomas Gleixner
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Thomas Gleixner
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Tony Lindgren
• [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Andreas Färber
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Linus Torvalds
• [PATCH v2 2/3] ARM64: dts: meson-gx: add clock CLKID_RNG0 to hwrng node   Rob Herring
• [PATCH 1/2] devicetree: Add vendor prefix for Hwacom Systems Inc.   Rob Herring
• [PATCH v3 2/4] ARM64: dts: meson-gx: add clock to DT binding documentation for hwrng   Rob Herring
• [PATCH 2/2] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV   Rob Herring
• [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe   Kevin Hilman
• [PATCH v3 10/10] mmc: meson-gx: replace magic timeout numbers with constants   Kevin Hilman
• [PATCH] mmc: meson-gx: fix error path when driver initialization fails before enabling clocks   Kevin Hilman
• [PATCH v2] mmc: meson-gx: remove mmc host on device removal   Kevin Hilman
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Ingo Molnar
• [PATCH] clk: meson: fix SET_PARM macro   Jerome Brunet
• [WARNING: A/V UNSCANNABLE][Merge tag 'media/v4.11-1' of git] ff58d005cd: BUG: unable to handle kernel NULL pointer dereference at 0000039c   Thomas Gleixner
• [PATCH 0/7] clk: meson: update clock controller for audio support   Jerome Brunet
• [PATCH 1/7] clk: meson8b: put dividers and muxes in tables   Jerome Brunet
• [PATCH 2/7] clk: gxbb: put dividers and muxes in tables   Jerome Brunet
• [PATCH 3/7] clk: meson: mpll: add rw operation   Jerome Brunet
• [PATCH 4/7] clk: meson: gxbb: mpll: use rw operation   Jerome Brunet
• [PATCH 5/7] clk: meson8b: add the mplls clocks 0, 1 and 2   Jerome Brunet
• [PATCH 6/7] clk: meson: mpll: correct N2 maximum value   Jerome Brunet
• [PATCH 7/7] dt-bindings: clk: gxbb: expose i2s output clock gates   Jerome Brunet
• [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design   Neil Armstrong
• [PATCH] clk: meson: fix SET_PARM macro   Kevin Hilman
• [PATCH] clk: meson: fix SET_PARM macro   Stephen Boyd
• [PATCH] clk: meson: fix SET_PARM macro   Jerome Brunet
• [PATCH 1/1] ARM64: dts: meson-gxl: improve support for the P212 reference design   Rob Herring

Last message date: Tue Feb 28 15:12:38 PST 2017
Archived on: Tue Feb 28 15:13:27 PST 2017

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...