[PATCH 09/18] mmc: meson-gx: change interrupt name

[Kevin Hilman]

Heiner Kallweit <hkallweit1 at gmail.com> writes:

> So far the driver name is used for the interrupt. Therefore in
> /proc/interrupts we can't tell which interrupt belongs to which
> SD_EMMC port.
> So let's use the device name instead (what is the OF node name).
>
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>

Acked-by: Kevin Hilman <khilman at baylibre.com>

> ---
>  drivers/mmc/host/meson-gx-mmc.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index a67c811e..1a76c925 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -757,9 +757,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>  	writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
>  	writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
>  
> -	ret = devm_request_threaded_irq(&pdev->dev, host->irq,
> -					meson_mmc_irq, meson_mmc_irq_thread,
> -					IRQF_SHARED, DRIVER_NAME, host);
> +	ret = devm_request_threaded_irq(&pdev->dev, host->irq, meson_mmc_irq,
> +					meson_mmc_irq_thread, IRQF_SHARED,
> +					dev_name(&pdev->dev), host);
>  	if (ret)
>  		goto free_host;