[PATCH 5/7] clk: meson8b: add the mplls clocks 0, 1 and 2

Jerome Brunet jbrunet at baylibre.com
Tue Feb 28 05:30:00 PST 2017


Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 drivers/clk/meson/meson8b.c | 103 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/meson8b.h |  20 ++++++++-
 2 files changed, 122 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 44c24bf754cd..034df7556126 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -245,6 +245,96 @@ static struct clk_fixed_factor meson8b_fclk_div7 = {
 	},
 };
 
+static struct meson_clk_mpll meson8b_mpll0 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL7,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll0",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll meson8b_mpll1 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL8,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll1",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
+static struct meson_clk_mpll meson8b_mpll2 = {
+	.sdm = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 0,
+		.width   = 14,
+	},
+	.sdm_en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 15,
+		.width   = 1,
+	},
+	.n2 = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 16,
+		.width   = 9,
+	},
+	.en = {
+		.reg_off = HHI_MPLL_CNTL9,
+		.shift   = 14,
+		.width   = 1,
+	},
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "mpll2",
+		.ops = &meson_clk_mpll_ops,
+		.parent_names = (const char *[]){ "fixed_pll" },
+		.num_parents = 1,
+	},
+};
+
 /*
  * FIXME cpu clocks and the legacy composite clocks (e.g. clk81) are both PLL
  * post-dividers and should be modeled with their respective PLLs via the
@@ -491,6 +581,9 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
 		[CLKID_AO_AHB_SRAM]	    = &meson8b_ao_ahb_sram.hw,
 		[CLKID_AO_AHB_BUS]	    = &meson8b_ao_ahb_bus.hw,
 		[CLKID_AO_IFACE]	    = &meson8b_ao_iface.hw,
+		[CLKID_MPLL0]		    = &meson8b_mpll0.hw,
+		[CLKID_MPLL1]		    = &meson8b_mpll1.hw,
+		[CLKID_MPLL2]		    = &meson8b_mpll2.hw,
 	},
 	.num = CLK_NR_CLKS,
 };
@@ -501,6 +594,12 @@ static struct meson_clk_pll *const meson8b_clk_plls[] = {
 	&meson8b_sys_pll,
 };
 
+static struct meson_clk_mpll *const meson8b_clk_mplls[] = {
+	&meson8b_mpll0,
+	&meson8b_mpll1,
+	&meson8b_mpll2,
+};
+
 static struct clk_gate *meson8b_clk_gates[] = {
 	&meson8b_clk81,
 	&meson8b_ddr,
@@ -610,6 +709,10 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
 		meson8b_clk_plls[i]->base = clk_base;
 
+	/* Populate base address for MPLLs */
+	for (i = 0; i < ARRAY_SIZE(meson8b_clk_mplls); i++)
+		meson8b_clk_mplls[i]->base = clk_base;
+
 	/* Populate the base address for CPU clk */
 	meson8b_cpu_clk.base = clk_base;
 
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index 010e9582888d..3881defc8644 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -42,6 +42,21 @@
 #define HHI_VID_PLL_CNTL		0x320 /* 0xc8 offset in data sheet */
 
 /*
+ * MPLL register offeset taken from the S905 datasheet. Vendor kernel source
+ * confirm these are the same for the S805.
+ */
+#define HHI_MPLL_CNTL			0x280 /* 0xa0 offset in data sheet */
+#define HHI_MPLL_CNTL2			0x284 /* 0xa1 offset in data sheet */
+#define HHI_MPLL_CNTL3			0x288 /* 0xa2 offset in data sheet */
+#define HHI_MPLL_CNTL4			0x28C /* 0xa3 offset in data sheet */
+#define HHI_MPLL_CNTL5			0x290 /* 0xa4 offset in data sheet */
+#define HHI_MPLL_CNTL6			0x294 /* 0xa5 offset in data sheet */
+#define HHI_MPLL_CNTL7			0x298 /* 0xa6 offset in data sheet */
+#define HHI_MPLL_CNTL8			0x29C /* 0xa7 offset in data sheet */
+#define HHI_MPLL_CNTL9			0x2A0 /* 0xa8 offset in data sheet */
+#define HHI_MPLL_CNTL10			0x2A4 /* 0xa9 offset in data sheet */
+
+/*
  * CLKID index values
  *
  * These indices are entirely contrived and do not map onto the hardware.
@@ -142,8 +157,11 @@
 #define CLKID_AO_AHB_SRAM	90
 #define CLKID_AO_AHB_BUS	91
 #define CLKID_AO_IFACE		92
+#define CLKID_MPLL0		93
+#define CLKID_MPLL1		94
+#define CLKID_MPLL2		95
 
-#define CLK_NR_CLKS		93
+#define CLK_NR_CLKS		96
 
 /* include the CLKIDs that have been made part of the stable DT binding */
 #include <dt-bindings/clock/meson8b-clkc.h>
-- 
2.9.3




More information about the linux-amlogic mailing list