[PATCH v5 0/9] meson-gx: reset RGMII PHYs and configure TX delay

[Jerome Brunet]

On Sun, 2017-02-19 at 22:41 +0100, Martin Blumenstingl wrote:
> This series adds the reset GPIOs for the (external) ethernet PHYs on
> all
> GXBB boards.
> Additionally it provides a ethernet PHY node which can be used to
> specify
> PHY-specific properties (this may be required if more boards require
> the
> "eee-broken-1000t" for the RTL8211F ethernet PHY). To make all board
> .dts
> consistent I chose to add the PHY node also for boards which don't
> have a
> RTL8211F PHY.
> 

Looks good to me. For the patchset:
Reviewed-by: Jerome Brunet <jbrunet at baylibre.com>

> 
> Martin Blumenstingl (9):
>   ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO
>   ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO
>   ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO
>   ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset
> GPIO
>   ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO
>   ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset
> GPIO
>   ARM64: dts: meson-gxbb-p201: fix ethernet support
>   ARM64: dts: amlogic: add the ethernet TX delay configuration
>   ARM64: dts: meson-gx: remove the phy-mode property from meson-gx
> 
>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi          |  1 -
>  .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts    | 17
> ++++++++++++++
>  .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts |  7 ++++++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts    | 25
> +++++++++++++++++++++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts    | 11 +++++++++
>  arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi   |  6 -----
>  .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi      | 21
> ++++++++++++++++-
>  .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts      | 26
> ++++++++++++++++++++++
>  .../boot/dts/amlogic/meson-gxbb-wetek-play2.dts    | 26
> ++++++++++++++++++++++
>  .../boot/dts/amlogic/meson-gxl-s905d-p230.dts      |  2 ++
>  .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts |  2 ++
>  arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts     |  2 ++
>  12 files changed, 138 insertions(+), 8 deletions(-)
>