[PATCH v3 resend] [media] serial_ir: ensure we're ready to receive interrupts

Mauro Carvalho Chehab mchehab at s-opensource.com
Sat Feb 25 06:47:54 PST 2017


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

From: Sean Young <sean at mess.org>

When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.

Also ensure that timeout_timer is setup.

Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com

[mchehab at s-opensource.com: moved serial_ir_probe() back to its original place]

Cc: <stable at vger.kernel.org> # 4.10
Signed-off-by: Sean Young <sean at mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab at s-opensource.com>
- ---

Something got wrong when trying to sign the patch on claws-mail.
Resending it.

 drivers/media/rc/serial_ir.c | 123 ++++++++++++++++++++++---------------------
 1 file changed, 62 insertions(+), 61 deletions(-)

diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 923fb2299553..41b54e40176c 100644
- --- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -487,10 +487,69 @@ static void serial_ir_timeout(unsigned long arg)
 	ir_raw_event_handle(serial_ir.rcdev);
 }
 
+/* Needed by serial_ir_probe() */
+static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
+			unsigned int count);
+static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle);
+static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier);
+static int serial_ir_open(struct rc_dev *rcdev);
+static void serial_ir_close(struct rc_dev *rcdev);
+
 static int serial_ir_probe(struct platform_device *dev)
 {
+	struct rc_dev *rcdev;
 	int i, nlow, nhigh, result;
 
+	rcdev = devm_rc_allocate_device(&dev->dev, RC_DRIVER_IR_RAW);
+	if (!rcdev)
+		return -ENOMEM;
+
+	if (hardware[type].send_pulse && hardware[type].send_space)
+		rcdev->tx_ir = serial_ir_tx;
+	if (hardware[type].set_send_carrier)
+		rcdev->s_tx_carrier = serial_ir_tx_carrier;
+	if (hardware[type].set_duty_cycle)
+		rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+	switch (type) {
+	case IR_HOMEBREW:
+		rcdev->input_name = "Serial IR type home-brew";
+		break;
+	case IR_IRDEO:
+		rcdev->input_name = "Serial IR type IRdeo";
+		break;
+	case IR_IRDEO_REMOTE:
+		rcdev->input_name = "Serial IR type IRdeo remote";
+		break;
+	case IR_ANIMAX:
+		rcdev->input_name = "Serial IR type AnimaX";
+		break;
+	case IR_IGOR:
+		rcdev->input_name = "Serial IR type IgorPlug";
+		break;
+	}
+
+	rcdev->input_phys = KBUILD_MODNAME "/input0";
+	rcdev->input_id.bustype = BUS_HOST;
+	rcdev->input_id.vendor = 0x0001;
+	rcdev->input_id.product = 0x0001;
+	rcdev->input_id.version = 0x0100;
+	rcdev->open = serial_ir_open;
+	rcdev->close = serial_ir_close;
+	rcdev->dev.parent = &serial_ir.pdev->dev;
+	rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
+	rcdev->driver_name = KBUILD_MODNAME;
+	rcdev->map_name = RC_MAP_RC6_MCE;
+	rcdev->min_timeout = 1;
+	rcdev->timeout = IR_DEFAULT_TIMEOUT;
+	rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
+	rcdev->rx_resolution = 250000;
+
+	serial_ir.rcdev = rcdev;
+
+	setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
+		    (unsigned long)&serial_ir);
+
 	result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
 				  share_irq ? IRQF_SHARED : 0,
 				  KBUILD_MODNAME, &hardware);
@@ -516,9 +575,6 @@ static int serial_ir_probe(struct platform_device *dev)
 		return -EBUSY;
 	}
 
- -	setup_timer(&serial_ir.timeout_timer, serial_ir_timeout,
- -		    (unsigned long)&serial_ir);
- -
 	result = hardware_init_port();
 	if (result < 0)
 		return result;
@@ -552,7 +608,8 @@ static int serial_ir_probe(struct platform_device *dev)
 			 sense ? "low" : "high");
 
 	dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- -	return 0;
+
+	return devm_rc_register_device(&dev->dev, rcdev);
 }
 
 static int serial_ir_open(struct rc_dev *rcdev)
@@ -723,7 +780,6 @@ static void serial_ir_exit(void)
 
 static int __init serial_ir_init_module(void)
 {
- -	struct rc_dev *rcdev;
 	int result;
 
 	switch (type) {
@@ -754,63 +810,9 @@ static int __init serial_ir_init_module(void)
 		sense = !!sense;
 
 	result = serial_ir_init();
- -	if (result)
- -		return result;
- -
- -	rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev, RC_DRIVER_IR_RAW);
- -	if (!rcdev) {
- -		result = -ENOMEM;
- -		goto serial_cleanup;
- -	}
- -
- -	if (hardware[type].send_pulse && hardware[type].send_space)
- -		rcdev->tx_ir = serial_ir_tx;
- -	if (hardware[type].set_send_carrier)
- -		rcdev->s_tx_carrier = serial_ir_tx_carrier;
- -	if (hardware[type].set_duty_cycle)
- -		rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
- -
- -	switch (type) {
- -	case IR_HOMEBREW:
- -		rcdev->input_name = "Serial IR type home-brew";
- -		break;
- -	case IR_IRDEO:
- -		rcdev->input_name = "Serial IR type IRdeo";
- -		break;
- -	case IR_IRDEO_REMOTE:
- -		rcdev->input_name = "Serial IR type IRdeo remote";
- -		break;
- -	case IR_ANIMAX:
- -		rcdev->input_name = "Serial IR type AnimaX";
- -		break;
- -	case IR_IGOR:
- -		rcdev->input_name = "Serial IR type IgorPlug";
- -		break;
- -	}
- -
- -	rcdev->input_phys = KBUILD_MODNAME "/input0";
- -	rcdev->input_id.bustype = BUS_HOST;
- -	rcdev->input_id.vendor = 0x0001;
- -	rcdev->input_id.product = 0x0001;
- -	rcdev->input_id.version = 0x0100;
- -	rcdev->open = serial_ir_open;
- -	rcdev->close = serial_ir_close;
- -	rcdev->dev.parent = &serial_ir.pdev->dev;
- -	rcdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
- -	rcdev->driver_name = KBUILD_MODNAME;
- -	rcdev->map_name = RC_MAP_RC6_MCE;
- -	rcdev->min_timeout = 1;
- -	rcdev->timeout = IR_DEFAULT_TIMEOUT;
- -	rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
- -	rcdev->rx_resolution = 250000;
- -
- -	serial_ir.rcdev = rcdev;
- -
- -	result = rc_register_device(rcdev);
- -
 	if (!result)
 		return 0;
- -serial_cleanup:
+
 	serial_ir_exit();
 	return result;
 }
@@ -818,7 +820,6 @@ static int __init serial_ir_init_module(void)
 static void __exit serial_ir_exit_module(void)
 {
 	del_timer_sync(&serial_ir.timeout_timer);
- -	rc_unregister_device(serial_ir.rcdev);
 	serial_ir_exit();
 }
 
- -- 
2.9.3


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
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=+Hja
-----END PGP SIGNATURE-----


More information about the linux-amlogic mailing list