July 2023 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jul 2 23:25:10 PDT 2023
Ending: Mon Jul 31 07:14:38 PDT 2023
Messages: 217

• [PATCH master v1 3/6] firmware: optionally turn missing firmware errors into warnings   Marco Felsch
  • [PATCH master v1 3/6] firmware: optionally turn missing firmware errors into warnings   Ahmad Fatoum
• [PATCH master v1 5/6] ARM64: unset CONFIG_MISSING_FIRMWARE_ERROR for Rockchip/i.MX   Marco Felsch
  • [PATCH master v1 5/6] ARM64: unset CONFIG_MISSING_FIRMWARE_ERROR for Rockchip/i.MX   Ahmad Fatoum
• [PATCH master v1 6/6] firmware: don't hardcode firmware paths in srctree for existence check   Marco Felsch
• [PATCH] nios2: remove arch remains from drivers   Sascha Hauer
  • [PATCH] nios2: remove arch remains from drivers   Sascha Hauer
• [PATCH master v2 1/2] of: implement of_reparent_node helper   Sascha Hauer
  • [PATCH master v2 1/2] of: implement of_reparent_node helper   Ahmad Fatoum
• [PATCH master] sandbox: dts: skip reboot mode without hostfile   Ahmad Fatoum
  • [PATCH master] sandbox: dts: skip reboot mode without hostfile   Sascha Hauer
• [PATCH master] kbuild: delete images with missing firmware instead of truncating   Ahmad Fatoum
  • [PATCH master] kbuild: delete images with missing firmware instead of truncating   Sascha Hauer
• [PATCH] treewide: Print device nodes with %pOF   Sascha Hauer
• v2023.07.0   Sascha Hauer
  • v2023.07.0   Ahmad Fatoum
    • v2023.07.0   Sascha Hauer
  • v2023.07.1   Sascha Hauer
• [PATCH] firmware: fix alignment of firmware images   Ahmad Fatoum
  • [PATCH] firmware: fix alignment of firmware images   Sascha Hauer
• [PATCH 1/2] soc: imx: featctrl: add help text for CONFIG_IMX8M_FEATCTRL   Ahmad Fatoum
  • [PATCH 1/2] soc: imx: featctrl: add help text for CONFIG_IMX8M_FEATCTRL   Sascha Hauer
• [PATCH 2/2] soc: imx: have IMX8M_FEATCTRL select IMX_OCOTP   Ahmad Fatoum
• [PATCH master] firmware: use portable newline escape   Ahmad Fatoum
• [PATCH v2] firmware: use portable newline escape   Ahmad Fatoum
  • [PATCH v2] firmware: use portable newline escape   Sascha Hauer
• [PATCH 1/2] commands: test: simplify argv handling   Marco Felsch
  • [PATCH 2/2] commands: test: add based support for bash-test style   Marco Felsch
    • [PATCH 2/2] commands: test: add based support for bash-test style   Ahmad Fatoum
      • [PATCH 2/2] commands: test: add based support for bash-test style   Marco Felsch
      • [PATCH 2/2] commands: test: add based support for bash-test style   Sascha Hauer
      • [PATCH 2/2] commands: test: add based support for bash-test style   Marco Felsch
    • [PATCH 2/2] commands: test: add based support for bash-test style   Sascha Hauer
• [PATCH 1/2] ARM: i.MX8MP: Debix: refactor lowlevel setup functions   Marco Felsch
  • [PATCH 2/2] ARM: i.MX8MP: Add DEBIX SOM A and SOM A I/O Board support   Marco Felsch
  • [PATCH 1/2] ARM: i.MX8MP: Debix: refactor lowlevel setup functions   Ahmad Fatoum
  • [PATCH 1/2] ARM: i.MX8MP: Debix: refactor lowlevel setup functions   Sascha Hauer
• [PATCH] ARM: zynq: get ps_clk_rate from dt   Sascha Hauer
• [PATCH] Documentation: use current link to bootloader spec spec   Sascha Hauer
• [PATCH 1/2] fixup! ARM: i.MX8MP: Add DEBIX SOM A and SOM A I/O Board support   Marco Felsch
  • [PATCH 1/2] fixup! ARM: i.MX8MP: Add DEBIX SOM A and SOM A I/O Board support   Sascha Hauer
• [PATCH 2/2] ARM64: configs: multi_v8_defconfig: enable onboard usb hub support   Marco Felsch
• [PATCH v2 1/3] commands: test: simplify argv handling   Marco Felsch
  • [PATCH v2 3/3] commands: test: add based support for bash-test style   Marco Felsch
• [PATCH v2 2/3] commands: test: replace printf with pr_err   Marco Felsch
  • [PATCH v2 2/3] commands: test: replace printf with pr_err   Sascha Hauer
    • [PATCH v2 2/3] commands: test: replace printf with pr_err   Marco Felsch
• [RFC 0/4] Run barebox on sc6531e-based feature phone   Sascha Hauer
  • [RFC 0/4] Run barebox on sc6531e-based feature phone   Antony Pavlov
• [PATCH v3 1/2] commands: test: simplify argv handling   Marco Felsch
  • [PATCH v3 2/2] commands: test: add based support for bash-test style   Marco Felsch
  • [PATCH v3 1/2] commands: test: simplify argv handling   Sascha Hauer
• [PATCH] net.c: Don't forget about the first fragment.   Christian Melki
  • [PATCH] net.c: Don't forget about the first fragment.   Sascha Hauer
• [PATCH 1/6] kbuild: clean start*_*.{p,ps}imximg files   Rouven Czerwinski
  • [PATCH 2/6] i.MX: HABv4: fix event status comparison   Rouven Czerwinski
  • [PATCH 3/6] i.MX: HABv4: extend support to i.MX8M SoCs   Rouven Czerwinski
    • [PATCH] fixup! i.MX: HABv4: extend support to i.MX8M SoCs   Ahmad Fatoum
      • [PATCH] fixup! i.MX: HABv4: extend support to i.MX8M SoCs   Marco Felsch
  • [PATCH 5/6] ARM: i.MX: introduce build_imx8m_habv4img   Rouven Czerwinski
  • [PATCH 6/6] ARM: i.MX: convert i.MX8MP/MM EVK to helper   Rouven Czerwinski
  • [PATCH 1/6] kbuild: clean start*_*.{p,ps}imximg files   Ahmad Fatoum
  • [PATCH 1/6] kbuild: clean start*_*.{p,ps}imximg files   Rouven Czerwinski
• [PATCH 4/6] ARM: i.MX: allow HAB for i.MX8M family   Rouven Czerwinski
• [PATCH] mci: imx-esdhc-pbl: fix image load in DDR mode   Marco Felsch
  • [PATCH] mci: imx-esdhc-pbl: fix image load in DDR mode   Ahmad Fatoum
  • [PATCH] mci: imx-esdhc-pbl: fix image load in DDR mode   Sascha Hauer
• [PATCH v1] ARM: at91: add support for SAMA5D3 - Ethernet Development System Board   Oleksij Rempel
  • [PATCH v1] ARM: at91: add support for SAMA5D3 - Ethernet Development System Board   Ahmad Fatoum
• [PATCH v2 1/3] ARM: at91: enable ddramc for sama5d3 and sama5d4   Oleksij Rempel
  • [PATCH v2 2/3] ARM: at91: add support for SAMA5D3 - Ethernet Development System Board   Oleksij Rempel
  • [PATCH v2 3/3] ARM: at91: microchip-ksz9477-evb: migrate to sama5d3_barebox_entry()   Oleksij Rempel
    • [PATCH v2 3/3] ARM: at91: microchip-ksz9477-evb: migrate to sama5d3_barebox_entry()   Ahmad Fatoum
      • [PATCH v2 3/3] ARM: at91: microchip-ksz9477-evb: migrate to sama5d3_barebox_entry()   Oleksij Rempel
      • [PATCH v2 3/3] ARM: at91: microchip-ksz9477-evb: migrate to sama5d3_barebox_entry()   Ahmad Fatoum
  • [PATCH v2 1/3] ARM: at91: enable ddramc for sama5d3 and sama5d4   Ahmad Fatoum
  • [PATCH v2 1/3] ARM: at91: enable ddramc for sama5d3 and sama5d4   Sascha Hauer
• [PATCH] ddr: imx8m: add comment and print out prior to first DDRC read   Ahmad Fatoum
  • [PATCH] ddr: imx8m: add comment and print out prior to first DDRC read   Marco Felsch
  • [PATCH] ddr: imx8m: add comment and print out prior to first DDRC read   Sascha Hauer
• [PATCH] commands: rm: add -f option to ignore nonexistent files   Ahmad Fatoum
  • [PATCH] commands: rm: add -f option to ignore nonexistent files   Sascha Hauer
• [PATCH master 1/3] usb: gadget: multi: do not double free on error   Ahmad Fatoum
  • [PATCH master 2/3] commands: usbserial: prevent double free   Ahmad Fatoum
  • [PATCH master 1/3] usb: gadget: multi: do not double free on error   Sascha Hauer
• [PATCH master 3/3] usb: gadget: return error on missing UDC   Ahmad Fatoum
• [PATCH 1/7] ARM: boards: make use of MDIO_MMD register defines   Marco Felsch
  • [PATCH 3/7] net: phy: sync phy_{write,read,modify}_mmd_indirect with linux   Marco Felsch
    • [PATCH 3/7] net: phy: sync phy_{write,read,modify}_mmd_indirect with linux   Ahmad Fatoum
      • [PATCH 3/7] net: phy: sync phy_{write,read,modify}_mmd_indirect with linux   Marco Felsch
      • [PATCH 3/7] net: phy: sync phy_{write,read,modify}_mmd_indirect with linux   Ahmad Fatoum
      • [PATCH 3/7] net: phy: sync phy_{write,read,modify}_mmd_indirect with linux   Marco Felsch
      • [PATCH 3/7] net: phy: sync phy_{write,read,modify}_mmd_indirect with linux   Ahmad Fatoum
      • [PATCH 3/7] net: phy: sync phy_{write,read,modify}_mmd_indirect with linux   Marco Felsch
      • [PATCH 3/7] net: phy: sync phy_{write,read,modify}_mmd_indirect with linux   Ahmad Fatoum
  • [PATCH 5/7] net: phy: at803x: add support for configuring SmartEEE   Marco Felsch
    • [PATCH 5/7] net: phy: at803x: add support for configuring SmartEEE   Ahmad Fatoum
      • [PATCH 5/7] net: phy: at803x: add support for configuring SmartEEE   Oleksij Rempel
  • [PATCH 1/7] ARM: boards: make use of MDIO_MMD register defines   Ahmad Fatoum
• [PATCH 2/7] net: phy: micrel: make use of MDIO_MMD register defines   Marco Felsch
  • [PATCH 2/7] net: phy: micrel: make use of MDIO_MMD register defines   Ahmad Fatoum
    • [PATCH 2/7] net: phy: micrel: make use of MDIO_MMD register defines   Marco Felsch
• [PATCH 4/7] net: phy: add phydev_{err,err_probe,info,warn,dbg} macros   Marco Felsch
  • [PATCH 4/7] net: phy: add phydev_{err,err_probe,info,warn,dbg} macros   Ahmad Fatoum
• [PATCH 6/7] net: phy: at803x: add disable hibernation mode support   Marco Felsch
  • [PATCH 6/7] net: phy: at803x: add disable hibernation mode support   Ahmad Fatoum
    • [PATCH 6/7] net: phy: at803x: add disable hibernation mode support   Marco Felsch
      • [PATCH 6/7] net: phy: at803x: add disable hibernation mode support   Ahmad Fatoum
• [PATCH 7/7] net: phy: at803x: disable extended next page bit   Marco Felsch
  • [PATCH 7/7] net: phy: at803x: disable extended next page bit   Ahmad Fatoum
• [PATCH 1/7] mci: sdhci: Add registers defines   Jules Maselbas
  • [PATCH 1/7] mci: sdhci: Add registers defines   Jules Maselbas
• [PATCH 1/8] mci: sdhci: Set 8-bit host caps   Jules Maselbas
  • [PATCH 2/8] mci: sdhci: Add registers defines   Jules Maselbas
  • [PATCH 3/8] mci: Add dwcmshc-sdhci driver   Jules Maselbas
    • [PATCH 3/8] mci: Add dwcmshc-sdhci driver   Sam Ravnborg
      • [PATCH 3/8] mci: Add dwcmshc-sdhci driver   Jules Maselbas
      • [PATCH 3/8] mci: Add dwcmshc-sdhci driver   Sascha Hauer
  • [PATCH 4/8] mci: sdhci: Actually return the error code instead of 0   Jules Maselbas
  • [PATCH 5/8] mci: sdhci: Add sd host v4 mode   Jules Maselbas
  • [PATCH 6/8] mci: sdhci: Add 64-bit DMA addressing suport for V4 mode   Jules Maselbas
  • [PATCH 7/8] mci: sdhci: Force DMA update to the next block boundary   Jules Maselbas
    • [PATCH 7/8] mci: sdhci: Force DMA update to the next block boundary   Jules Maselbas
    • [PATCH] fixup! mci: sdhci: Force DMA update to the next block boundary   Jules Maselbas
  • [PATCH 8/8] mci: dwcmshc: Use sdhci_enable_v4_mode()   Jules Maselbas
• [PATCH] kvx: Remove unused defines   Jules Maselbas
  • [PATCH] kvx: Remove unused defines   Sascha Hauer
• [PATCH 1/3] soc: kvx: Rename function to match global variable   Jules Maselbas
  • [PATCH 2/3] soc: kvx: Fix memory leaks   Jules Maselbas
  • [PATCH 3/3] soc: kvx: Add board_sn global var from OTP   Jules Maselbas
    • [PATCH 3/3] soc: kvx: Add board_sn global var from OTP   Sascha Hauer
      • [PATCH 3/3] soc: kvx: Add board_sn global var from OTP   Jules Maselbas
  • [PATCH 1/3] soc: kvx: Rename function to match global variable   Sascha Hauer
• [PATCH] of_firmware: fix lookup of fpga manager   Michael Tretter
  • [PATCH] of_firmware: fix lookup of fpga manager   Sascha Hauer
• [PATCH] .gitignore: Add generated scripts/rkimage to .gitignore   Alexander Shiyan
  • [PATCH 1/2] i2c: Added feature to get bus number from alias   Alexander Shiyan
    • [PATCH 1/2] i2c: Added feature to get bus number from alias   Sascha Hauer
  • [PATCH 2/2] i2c: rockchip: Get I2C bus number from devicetree alias   Alexander Shiyan
• [PATCH] mfd: rk808: Add missing RK809 chip ID to poweroff handler   Alexander Shiyan
• [PATCH 1/5] mtd: spi-nor: Add SPI_NOR_QUAD_WRITE hwcap   Jules Maselbas
  • [PATCH 2/5] mtd: spi-nor: enable {dual,quad}-read and quad-write for w25q256   Jules Maselbas
  • [PATCH 3/5] mtd: spi-nor: enable quad-write for is25lp01g   Jules Maselbas
  • [PATCH 4/5] mtd: spi-nor: move SPI_NOR_MAX_ADDR_WIDTH define to spi-nor.h   Jules Maselbas
  • [PATCH 5/5] mtd: spi-nor: Add Synopsys DesignWare Octal SPI driver   Jules Maselbas
    • [PATCH 5/5] mtd: spi-nor: Add Synopsys DesignWare Octal SPI driver   Sascha Hauer
• [PATCH] common: bootm: support locating kernel in FIT image in zero page   Steffen Trumtrar
  • [PATCH] common: bootm: support locating kernel in FIT image in zero page   Ahmad Fatoum
    • [PATCH] common: bootm: support locating kernel in FIT image in zero page   Michael Tretter
    • [PATCH] common: bootm: support locating kernel in FIT image in zero page   Sascha Hauer
• [PATCH] rsa: escape pkcs11 string passed to RSA command   Rouven Czerwinski
  • [PATCH] rsa: escape pkcs11 string passed to RSA command   Sascha Hauer
• [PATCH] fdt: copy terminating '\0' in lstrcpy()   Enrico Scholz
  • [PATCH] fdt: copy terminating '\0' in lstrcpy()   Sascha Hauer
• [PATCH 1/2] net: ifup: check for ctrl+c during ifup   Ahmad Fatoum
  • [PATCH 2/2] net: ifup: don't redo ifup -a1 if we have a gateway   Ahmad Fatoum
  • [PATCH 1/2] net: ifup: check for ctrl+c during ifup   Sascha Hauer
• [PATCH] commands: go: support passing integer arguments instead of argc/argv   Ahmad Fatoum
  • [PATCH] commands: go: support passing integer arguments instead of argc/argv   Sascha Hauer
• [PATCH] mfd: regulator: initial support for pca9450   Holger Assmann
  • [PATCH] mfd: regulator: initial support for pca9450   Sascha Hauer
• [PATCH] bootchooser: honour reset source   Holger Assmann
  • [PATCH] bootchooser: honour reset source   Sascha Hauer
• [PATCH 00/21] MIPS: semi-random code improvements   Denis Orlov
  • [PATCH 02/21] MIPS: addrspace: simplify the header   Denis Orlov
  • [PATCH 03/21] MIPS: main_entry-pbl: remove unused variable   Denis Orlov
  • [PATCH 04/21] MIPS: barebox.lds: remove extra whitespace   Denis Orlov
  • [PATCH 05/21] MIPS: reloc: mark relocate_code() as noreturn   Denis Orlov
  • [PATCH 06/21] MIPS: cpuinfo: use appropriate format specifiers in printf   Denis Orlov
  • [PATCH 07/21] MIPS: print BadVAddr CP0 register on exception   Denis Orlov
  • [PATCH 08/21] MIPS: malta: merge GT64120 headers   Denis Orlov
  • [PATCH 09/21] MIPS: pbl_macros: use .asciiz instead of .ascii + .byte 0   Denis Orlov
  • [PATCH 10/21] MIPS: malta: remove duplicated barebox magic code   Denis Orlov
  • [PATCH 11/21] MIPS: pbl: put mips_barebox_10h into ENTRY_FUNCTION   Denis Orlov
  • [PATCH 12/21] MIPS: pbl: make sure to disable interrupts/watchpoints on entry   Denis Orlov
  • [PATCH 13/21] MIPS: pbl: do enable 64-bit addressing in PBL   Denis Orlov
  • [PATCH 14/21] MIPS: clean up barebox proper entry point   Denis Orlov
  • [PATCH 15/21] MIPS: main_entry: properly set XTLB handler for 64-bit mode   Denis Orlov
  • [PATCH 16/21] MIPS: main_entry: remove exception vector array   Denis Orlov
  • [PATCH 17/21] MIPS: c-r4k: prettify code in __BUILD_BLAST_CACHE_RANGE   Denis Orlov
  • [PATCH 18/21] MIPS: c-r4k: generate blast_*cache functions via macros   Denis Orlov
  • [PATCH 19/21] MIPS: c-r4k: do flush secondary cache   Denis Orlov
  • [PATCH 20/21] MIPS: c-r4k: remove extra function declaration   Denis Orlov
  • [PATCH 21/21] MIPS: reloc: use IS_ALIGNED macro to check for an alignment   Denis Orlov
  • [PATCH 00/21] MIPS: semi-random code improvements   Sascha Hauer
• [PATCH 01/21] MIPS: addrspace: rectify ksseg segment naming   Denis Orlov
• [PATCH] drivers: hab: work-around GCC -Wmaybe-uninitialized false-positive   Ahmad Fatoum
  • [PATCH] drivers: hab: work-around GCC -Wmaybe-uninitialized false-positive   Sascha Hauer
• [PATCH v2] commands: go: support passing integer arguments instead of argc/argv   Ahmad Fatoum
  • [PATCH v2] commands: go: support passing integer arguments instead of argc/argv   Sascha Hauer
• [PATCH 1/4] commands: hab: check for error in imx_hab_device_locked_down   Ahmad Fatoum
  • [PATCH 2/4] HAB: guard against NULL imx_hab_ops in imx_hab_device_locked_down()   Ahmad Fatoum
  • [PATCH 3/4] nvmem: ocotp: handle too early calls into ocotp driver gracefully   Ahmad Fatoum
    • [PATCH 3/4] nvmem: ocotp: handle too early calls into ocotp driver gracefully   Marco Felsch
      • [PATCH 3/4] nvmem: ocotp: handle too early calls into ocotp driver gracefully   Ahmad Fatoum
  • [PATCH 4/4] hab: habv4: export function to query HAB state   Ahmad Fatoum
  • [PATCH 1/4] commands: hab: check for error in imx_hab_device_locked_down   Marco Felsch
  • [PATCH 1/4] commands: hab: check for error in imx_hab_device_locked_down   Sascha Hauer
• [PATCH] bootm: export bootm_set_verify_mode   Ahmad Fatoum
  • [PATCH] bootm: export bootm_set_verify_mode   Marco Felsch
  • [PATCH] bootm: export bootm_set_verify_mode   Sascha Hauer
• [PATCH 1/2] Makefile: allow setting pkg-config binary via PKG_CONFIG   Ahmad Fatoum
  • [PATCH 2/2] kbuild: Add environment variables for userprogs flags   Ahmad Fatoum
  • [PATCH 1/2] Makefile: allow setting pkg-config binary via PKG_CONFIG   Sascha Hauer
• [PATCH] crypto: clarify relationship of CONFIG_{BOOTM_FITIMAGE_PUBKEY,RSA_KEY}   Ahmad Fatoum
  • [PATCH] crypto: clarify relationship of CONFIG_{BOOTM_FITIMAGE_PUBKEY,RSA_KEY}   Sascha Hauer
• [PATCH 1/2] Add SPDX License identifier for files originating from LiMon   Sascha Hauer
• [PATCH 2/2] test/self/mmu.c: Fix typo in SPDX License Identifier   Sascha Hauer
• [PATCH] FIT: don't verify signature of non-signature nodes   Ahmad Fatoum
  • [PATCH] FIT: don't verify signature of non-signature nodes   Sascha Hauer
• [PATCH] i2c: stm32: Update driver   Alexander Shiyan
• [PATCH] state: backend_bucket_direct: add debug prints on read/write   Ahmad Fatoum
  • [PATCH] state: backend_bucket_direct: add debug prints on read/write   Johannes Zink
    • [PATCH] state: backend_bucket_direct: add debug prints on read/write   Ahmad Fatoum
      • [PATCH] state: backend_bucket_direct: add debug prints on read/write   Johannes Zink
  • [PATCH] state: backend_bucket_direct: add debug prints on read/write   Sascha Hauer
  • [PATCH] state: backend_bucket_direct: add debug prints on read/write   Ahmad Fatoum

Last message date: Mon Jul 31 07:14:38 PDT 2023
Archived on: Mon Jul 31 07:14:43 PDT 2023

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...