[PATCH 1/7] ARM: boards: make use of MDIO_MMD register defines

[Marco Felsch]

Make use of the register definition instead of having magic numbers. No
functional change.

Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
 arch/arm/boards/datamodul-edm-qmx6/board.c   | 7 ++++---
 arch/arm/boards/embest-marsboard/board.c     | 7 ++++---
 arch/arm/boards/terasic-de0-nano-soc/board.c | 7 ++++---
 arch/arm/boards/terasic-de10-nano/board.c    | 7 ++++---
 arch/arm/boards/tqma6x/board.c               | 7 ++++---
 5 files changed, 20 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boards/datamodul-edm-qmx6/board.c b/arch/arm/boards/datamodul-edm-qmx6/board.c
index 9adb3ee0f8..366b64d35a 100644
--- a/arch/arm/boards/datamodul-edm-qmx6/board.c
+++ b/arch/arm/boards/datamodul-edm-qmx6/board.c
@@ -11,6 +11,7 @@
 #include <gpio.h>
 #include <of.h>
 
+#include <linux/mdio.h>
 #include <linux/micrel_phy.h>
 #include <mfd/stmpe-i2c.h>
 
@@ -48,9 +49,9 @@ static int ksz9031rn_phy_fixup(struct phy_device *dev)
 	 * min rx data delay, max rx/tx clock delay,
 	 * min rx/tx control delay
 	 */
-	phy_write_mmd_indirect(dev, 4, 2, 0);
-	phy_write_mmd_indirect(dev, 5, 2, 0);
-	phy_write_mmd_indirect(dev, 8, 2, 0x03ff);
+	phy_write_mmd_indirect(dev, 4, MDIO_MMD_WIS, 0);
+	phy_write_mmd_indirect(dev, 5, MDIO_MMD_WIS, 0);
+	phy_write_mmd_indirect(dev, 8, MDIO_MMD_WIS, 0x03ff);
 
 	return 0;
 }
diff --git a/arch/arm/boards/embest-marsboard/board.c b/arch/arm/boards/embest-marsboard/board.c
index 7835a9265a..7274595e2a 100644
--- a/arch/arm/boards/embest-marsboard/board.c
+++ b/arch/arm/boards/embest-marsboard/board.c
@@ -9,6 +9,7 @@
 #include <init.h>
 #include <envfs.h>
 #include <mach/imx/bbu.h>
+#include <linux/mdio.h>
 #include <linux/phy.h>
 #include <deep-probe.h>
 
@@ -19,13 +20,13 @@ static int ar8035_phy_fixup(struct phy_device *dev)
 	/* Ar803x phy SmartEEE feature cause link status generates glitch,
 	 * which cause ethernet link down/up issue, so disable SmartEEE
 	 */
-	val = phy_read_mmd_indirect(dev, 0x805d, 0x3);
+	val = phy_read_mmd_indirect(dev, 0x805d, MDIO_MMD_PCS);
 	phy_write(dev, MII_MMD_DATA, val & ~(1 << 8));
 
-	val = phy_read_mmd_indirect(dev, 0x4003, 0x3);
+	val = phy_read_mmd_indirect(dev, 0x4003, MDIO_MMD_PCS);
 	phy_write(dev, MII_MMD_DATA, val & ~(1 << 8));
 
-	val = phy_read_mmd_indirect(dev, 0x4007, 0x3);
+	val = phy_read_mmd_indirect(dev, 0x4007, MDIO_MMD_PCS);
 	val &= 0xffe3;
 	val |= 0x18;
 	phy_write(dev, MII_MMD_DATA, val);
diff --git a/arch/arm/boards/terasic-de0-nano-soc/board.c b/arch/arm/boards/terasic-de0-nano-soc/board.c
index 19f74b784c..832160c595 100644
--- a/arch/arm/boards/terasic-de0-nano-soc/board.c
+++ b/arch/arm/boards/terasic-de0-nano-soc/board.c
@@ -5,6 +5,7 @@
 #include <driver.h>
 #include <init.h>
 #include <asm/armlinux.h>
+#include <linux/mdio.h>
 #include <linux/micrel_phy.h>
 #include <linux/phy.h>
 #include <linux/sizes.h>
@@ -18,9 +19,9 @@ static int phy_fixup(struct phy_device *dev)
 	 * min rx data delay, max rx/tx clock delay,
 	 * min rx/tx control delay
 	 */
-	phy_write_mmd_indirect(dev, 4, 2, 0);
-	phy_write_mmd_indirect(dev, 5, 2, 0);
-	phy_write_mmd_indirect(dev, 8, 2, 0x003ff);
+	phy_write_mmd_indirect(dev, 4, MDIO_MMD_WIS, 0);
+	phy_write_mmd_indirect(dev, 5, MDIO_MMD_WIS, 0);
+	phy_write_mmd_indirect(dev, 8, MDIO_MMD_WIS, 0x003ff);
 	return 0;
 }
 
diff --git a/arch/arm/boards/terasic-de10-nano/board.c b/arch/arm/boards/terasic-de10-nano/board.c
index 580c898012..e47d9ac841 100644
--- a/arch/arm/boards/terasic-de10-nano/board.c
+++ b/arch/arm/boards/terasic-de10-nano/board.c
@@ -5,6 +5,7 @@
 #include <driver.h>
 #include <init.h>
 #include <asm/armlinux.h>
+#include <linux/mdio.h>
 #include <linux/micrel_phy.h>
 #include <linux/phy.h>
 #include <linux/sizes.h>
@@ -18,9 +19,9 @@ static int phy_fixup(struct phy_device *dev)
 	 * min rx data delay, max rx/tx clock delay,
 	 * min rx/tx control delay
 	 */
-	phy_write_mmd_indirect(dev, 4, 2, 0);
-	phy_write_mmd_indirect(dev, 5, 2, 0);
-	phy_write_mmd_indirect(dev, 8, 2, 0x003ff);
+	phy_write_mmd_indirect(dev, 4, MDIO_MMD_WIS, 0);
+	phy_write_mmd_indirect(dev, 5, MDIO_MMD_WIS, 0);
+	phy_write_mmd_indirect(dev, 8, MDIO_MMD_WIS, 0x003ff);
 	return 0;
 }
 
diff --git a/arch/arm/boards/tqma6x/board.c b/arch/arm/boards/tqma6x/board.c
index 4bb7223a6e..8a91ad652a 100644
--- a/arch/arm/boards/tqma6x/board.c
+++ b/arch/arm/boards/tqma6x/board.c
@@ -11,6 +11,7 @@
 #include <gpio.h>
 #include <of.h>
 
+#include <linux/mdio.h>
 #include <linux/micrel_phy.h>
 #include <mfd/stmpe-i2c.h>
 
@@ -46,9 +47,9 @@ static int ksz9031rn_phy_fixup(struct phy_device *dev)
 	 * min rx data delay, max rx/tx clock delay,
 	 * min rx/tx control delay
 	 */
-	phy_write_mmd_indirect(dev, 4, 2, 0);
-	phy_write_mmd_indirect(dev, 5, 2, 0);
-	phy_write_mmd_indirect(dev, 8, 2, 0x003ff);
+	phy_write_mmd_indirect(dev, 4, MDIO_MMD_WIS, 0);
+	phy_write_mmd_indirect(dev, 5, MDIO_MMD_WIS, 0);
+	phy_write_mmd_indirect(dev, 8, MDIO_MMD_WIS, 0x003ff);
 
 	return 0;
 }
-- 
2.39.2