[PATCH 1/2] ARM: i.MX8MP: Debix: refactor lowlevel setup functions

[Sascha Hauer]

On Tue, Jul 04, 2023 at 01:01:10AM +0200, Marco Felsch wrote:
> Pass the dram timing info and devicetree data as parameter instead of
> hardcode them into the function. The required information is passed by
> the ENTRY_FUNCTION after the relocation and the setup_c is done. This
> prepares the lowlevel code for adding new boards with minimal effort.
> 
> Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> ---
>  arch/arm/boards/polyhex-debix/lowlevel.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/boards/polyhex-debix/lowlevel.c b/arch/arm/boards/polyhex-debix/lowlevel.c
> index 1c8be39559..bb4d6f53a0 100644
> --- a/arch/arm/boards/polyhex-debix/lowlevel.c
> +++ b/arch/arm/boards/polyhex-debix/lowlevel.c
> @@ -83,7 +83,7 @@ static void power_init_board(void)
>  
>  extern struct dram_timing_info imx8mp_debix_dram_timing;
>  
> -static void start_atf(void)
> +static void start_atf(struct dram_timing_info *dram_timing)
>  {
>  	/*
>  	 * If we are in EL3 we are running for the first time and need to
> @@ -95,7 +95,7 @@ static void start_atf(void)
>  
>  	power_init_board();
>  
> -	imx8mp_ddr_init(&imx8mp_debix_dram_timing, DRAM_TYPE_LPDDR4);
> +	imx8mp_ddr_init(dram_timing, DRAM_TYPE_LPDDR4);
>  
>  	imx8mp_load_and_start_image_via_tfa();
>  }
> @@ -116,16 +116,17 @@ static void start_atf(void)
>   *
>   * 4. Standard barebox boot flow continues
>   */
> -static __noreturn noinline void imx8mp_debix_model_a_start(void)
> +static __noreturn noinline void
> +imx8mp_debix_start(struct dram_timing_info *dram_timing, void *dtb)
>  {
>  	setup_uart();
>  
> -	start_atf();
> +	start_atf(dram_timing);
>  
>  	/*
>  	 * Standard entry we hit once we initialized both DDR and ATF
>  	 */
> -	imx8mp_barebox_entry(__dtb_z_imx8mp_debix_model_a_start);
> +	imx8mp_barebox_entry(dtb);
>  }
>  
>  ENTRY_FUNCTION(start_polyhex_debix, r0, r1, r2)
> @@ -135,5 +136,6 @@ ENTRY_FUNCTION(start_polyhex_debix, r0, r1, r2)
>  	relocate_to_current_adr();
>  	setup_c();
>  
> -	imx8mp_debix_model_a_start();
> +	imx8mp_debix_start(&imx8mp_debix_dram_timing,
> +			   __dtb_z_imx8mp_debix_model_a_start);
>  }
> -- 
> 2.39.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |