[PATCH] mci: imx-esdhc-pbl: fix image load in DDR mode

[Marco Felsch]

The __esdhc_send_cmd checks the sdhci.timing setting and configures it
accordingly. If the BootROM configured the device to operare in DDR mode
we need to honor that else the PBL can't load the binary correctly from
the eMMC. Therefore readback the sdhci mixctrl setting and set the
sdhci.timing to DDR52. At the moment DDR52 is the fastest/highest
transferrate the BootROM supports, so we don't need to handle HS200/400
yet.

Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
 drivers/mci/imx-esdhc-pbl.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mci/imx-esdhc-pbl.c b/drivers/mci/imx-esdhc-pbl.c
index 7c5febb7a8..f789f43b69 100644
--- a/drivers/mci/imx-esdhc-pbl.c
+++ b/drivers/mci/imx-esdhc-pbl.c
@@ -120,6 +120,8 @@ esdhc_load_image(struct fsl_esdhc_host *host, ptrdiff_t address,
 static void imx_esdhc_init(struct fsl_esdhc_host *host,
 			   struct esdhc_soc_data *data)
 {
+	u32 mixctrl;
+
 	data->flags = ESDHC_FLAG_USDHC;
 	host->socdata = data;
 	esdhc_populate_sdhci(host);
@@ -129,6 +131,10 @@ static void imx_esdhc_init(struct fsl_esdhc_host *host,
 		      FIELD_PREP(WML_WR_WML_MASK, SECTOR_WML) |
 		      FIELD_PREP(WML_RD_BRST_LEN, 16)         |
 		      FIELD_PREP(WML_RD_WML_MASK, SECTOR_WML));
+
+	mixctrl = sdhci_read32(&host->sdhci, IMX_SDHCI_MIXCTRL);
+	if (mixctrl & MIX_CTRL_DDREN)
+		host->sdhci.timing = MMC_TIMING_MMC_DDR52;
 }
 
 static int imx8m_esdhc_init(struct fsl_esdhc_host *host,
-- 
2.39.2