December 2020 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Dec 1 08:17:59 EST 2020
Ending: Tue Dec 29 15:23:28 EST 2020
Messages: 104

• [PATCH] images: Add automatic image crc generation for imd   Yunus Bas
• [PATCH] images: Add automatic image crc generation for imd   Yunus Bas
• Running reset stress test   Rouven Czerwinski
• Why /dev/mem has null size?   DEMIRDJIAN, Antoine
• Why /dev/mem has null size?   DEMIRDJIAN, Antoine
• Running reset stress test   Fabio Estevam
• Running reset stress test   Fabio Estevam
• [PATCH] usb: host: ehci: fix mismatch in format string   Ahmad Fatoum
• [PATCH v2 1/2] usb: host: ehci: fix mismatch in format string   Ahmad Fatoum
• [PATCH v2 2/2] commands: memtester: fix mismatched format string   Ahmad Fatoum
• [PATCH 1/2] ARM: i.MX: add low level gpio helpers for i.MX8M   Ahmad Fatoum
• [PATCH 2/2] ARM: i.MX8M: bbu: rename imx8mq_bbu_* functions to imx8m_bbu_*   Ahmad Fatoum
• [PATCH] fixup! doc: bcm283x: document use of mini-uart on Raspberry Pi Zero W / CM3   Ahmad Fatoum
• [PATCH 11/11] doc: bcm283x: document use of mini-uart on Raspberry Pi Zero W / CM3   Ahmad Fatoum
• [PATCH] fixup! ARM: rpi: Add Raspberry Pi Zero W mini-uart support   Ahmad Fatoum
• [PATCH 1/2] phy: stm32-usphyc: release resources to properly support EPROBE_DEFER   Ahmad Fatoum
• Why /dev/mem has null size?   Ahmad Fatoum
• [PATCH 0/2] usb: dwc2: gadget: fix stm32mp1 hang on barebox shutdown   Ahmad Fatoum
• [PATCH 1/2] fixup! usb: dwc2: Add support for optional usb phy   Ahmad Fatoum
• [PATCH 2/2] regulator: stm32-pwr: don't propagate regulator turn-off to supply   Ahmad Fatoum
• [PATCH] include: <linux/math64.h>: sync with upstream   Ahmad Fatoum
• [PATCH] video: sdl: delete useless debug output   Ahmad Fatoum
• [PATCH 1/4] usb: dwc2: Add support for optional usb phy   Michael Grzeschik
• [PATCH 0/5] dwc2: improve gadget support   Michael Grzeschik
• [PATCH 1/5] usb: dwc2: cleanup on error for deferred probing   Michael Grzeschik
• [PATCH 2/5] usb: dwc2: add clk dependency for probe via oftree   Michael Grzeschik
• [PATCH 3/5] usb: dwc2: add reset controller dependency for probe via oftree   Michael Grzeschik
• [PATCH 4/5] usb: dwc2: update the dr_mode on set_mode callback   Michael Grzeschik
• [PATCH 5/5] usb: dwc2: add support to force gadget mode   Michael Grzeschik
• [PATCH v2 0/5] dwc2: improve gadget support   Michael Grzeschik
• [PATCH v2 1/5] usb: dwc2: cleanup on error for deferred probing   Michael Grzeschik
• [PATCH v2 2/5] usb: dwc2: add clk dependency for probe via oftree   Michael Grzeschik
• [PATCH v2 3/5] usb: dwc2: add reset controller dependency for probe via oftree   Michael Grzeschik
• [PATCH v2 4/5] usb: dwc2: update the dr_mode on set_mode callback   Michael Grzeschik
• [PATCH v2 5/5] usb: dwc2: add support to force gadget mode   Michael Grzeschik
• [PATCH 11/11] doc: bcm283x: document use of mini-uart on Raspberry Pi Zero W / CM3   Sascha Hauer
• [PATCH] usb: host: ehci: fix mismatch in format string   Sascha Hauer
• [PATCH] arm/lib: Replace license and copyright boilerplate by SPDX identifiers   Sascha Hauer
• [PATCH] mci: Replace license and copyright boilerplate by SPDX identifiers   Sascha Hauer
• [PATCH v2 2/2] commands: memtester: fix mismatched format string   Sascha Hauer
• [PATCH] ARM: i.MX: OCOTP: read serial number with correct endianness   Sascha Hauer
• [PATCH 1/2] imd command: Bail out when crc generation/check fails   Sascha Hauer
• [PATCH 2/2] imd command: Document verbose option   Sascha Hauer
• [PATCH] images: Add automatic image crc generation for imd   Sascha Hauer
• [PATCH 1/3] imd command: specify outfile for crc tag generation   Sascha Hauer
• [PATCH 2/3] kbuild: Add command to generate the crc for the IMD crc tag   Sascha Hauer
• [PATCH 3/3] images: i.MX: fill in crc in IMD crc tags   Sascha Hauer
• [PATCH v1] ARM i.MX6Q: fix network configuration for Protonic PRTI6G board   Sascha Hauer
• [PATCH 1/2] ARM: i.MX: add low level gpio helpers for i.MX8M   Sascha Hauer
• [PATCH 11/11] doc: bcm283x: document use of mini-uart on Raspberry Pi Zero W / CM3   Sascha Hauer
• [PATCH] phy: usb-nop-xceiv: Make the clock always optional   Sascha Hauer
• [PATCH] ubifs: remove wrong assertion   Sascha Hauer
• [PATCH] fixup! ARM: rpi: Add Raspberry Pi Zero W mini-uart support   Sascha Hauer
• [PATCH 2/4] usb: dwc2: Move static function prototypes into core.c   Sascha Hauer
• [PATCH] ARM: am335x: Use xz compression for MLO   Sascha Hauer
• [PATCH 1/5] mtd: nand: Allow non page aligned length writes   Sascha Hauer
• [PATCH 2/5] nand: omap: Fix BCH16 read   Sascha Hauer
• [PATCH 3/5] mtd: nand: omap: print error when ELM config failed   Sascha Hauer
• [PATCH 4/5] mtd: nand: omap: Bail out when omap_gpmc_eccmode() fails   Sascha Hauer
• [PATCH 5/5] mtd: nand: Make write support optional   Sascha Hauer
• [PATCH 1/3] mtd: spi-nor: Make write support optional   Sascha Hauer
• [PATCH 2/3] mtd: nand: Make support for syndrome hardware ecc optional   Sascha Hauer
• [PATCH 3/3] mtd: nand: Make software ECC support optional   Sascha Hauer
• [PATCH] spi: store names in struct spi_device_id as pointers   Sascha Hauer
• barebox-2020.12.0   Sascha Hauer
• [PATCH v2 1/4] usb: dwc2: Add support for optional usb phy   Sascha Hauer
• [PATCH] usb: xhci: Honor transfer timeouts   Sascha Hauer
• [PATCH v2 1/4] usb: dwc2: Add support for optional usb phy   Sascha Hauer
• [PATCH 1/2] phy: stm32-usphyc: release resources to properly support EPROBE_DEFER   Sascha Hauer
• [PATCH] ARM: i.MX: OCOTP: read serial number with correct endianness   Robert Karszniewicz
• [PATCH] usb: host: ehci: fix mismatch in format string   Uwe Kleine-König
• [PATCH] arm/lib: Replace license and copyright boilerplate by SPDX identifiers   Uwe Kleine-König
• [PATCH] mci: Replace license and copyright boilerplate by SPDX identifiers   Uwe Kleine-König
• [PATCH v2 1/2] usb: host: ehci: fix mismatch in format string   Uwe Kleine-König
• [PATCH] arm/at91: Replace license and copyright boilerplate by SPDX identifiers   Uwe Kleine-König
• [PATCH] phy: usb-nop-xceiv: Make the clock always optional   Jules Maselbas
• [PATCH 1/4] usb: dwc2: Add support for optional usb phy   Jules Maselbas
• [PATCH 2/4] usb: dwc2: Move static function prototypes into core.c   Jules Maselbas
• [PATCH 3/4] usb: dwc2: Fix mode check in dwc2_get_dr_mode   Jules Maselbas
• [PATCH 4/4] usb: dwc2: Rename dwc2_core_snpsid to dwc2_check_core_version   Jules Maselbas
• [PATCH] phy: usb-nop-xceiv: Make the clock always optional   Jules Maselbas
• [PATCH 2/4] usb: dwc2: Move static function prototypes into core.c   Jules Maselbas
• [PATCH v2 1/4] usb: dwc2: Add support for optional usb phy   Jules Maselbas
• [PATCH v2 2/4] usb: dwc2: Remove unnecessary functions declaration   Jules Maselbas
• [PATCH v2 3/4] usb: dwc2: Fix dr_mode check in dwc2_get_dr_mode   Jules Maselbas
• [PATCH v2 4/4] usb: dwc2: Rename dwc2_core_snpsid to dwc2_check_core_version   Jules Maselbas
• [PATCH v2 1/4] usb: dwc2: Add support for optional usb phy   Jules Maselbas
• [PATCH v2] fixup! usb: dwc2: Add support for optional usb phy   Jules Maselbas
• [PATCH 1/5] usb: dwc2: cleanup on error for deferred probing   Jules Maselbas
• [PATCH v2 0/5] dwc2: improve gadget support   Jules Maselbas
• [PATCH 5/5] ARM: i.MX: add MNT Reform board support   Antony Pavlov
• [PATCH v1] ARM i.MX6Q: fix network configuration for Protonic PRTI6G board   Oleksij Rempel
• [PATCH 1/5] ddr: imx8m: implement i.MX8MQ support   Lucas Stach
• [PATCH 2/5] ddr: imx8m: remove bogus defines   Lucas Stach
• [PATCH 3/5] ARM: i.mx8mq: add PAD CTL defines   Lucas Stach
• [PATCH 4/5] net: phy: at803x: sync RX/TX delay setup with Linux   Lucas Stach
• [PATCH 5/5] ARM: i.MX: add MNT Reform board support   Lucas Stach
• [PATCH 5/5] ARM: i.MX: add MNT Reform board support   Lucas Stach
• [PATCH] ARM: imx8mq: reclock ARM PLL to 800MHz   Lucas Stach
• [PATCH] overlay: return error if target for firmware is missing   Michael Tretter
• [PATCH 1/3] i.MX7: Add CCM definitions for UART3   Steffen Trumtrar
• [PATCH 2/3] net: mdio:gpio: fix typos in dev_dbg   Steffen Trumtrar
• [PATCH 3/3] eeprom: at24: add support for 24cs64   Steffen Trumtrar
• No oob scheme defined for oobsize 224 on imx6ull board   郑小军

Last message date: Tue Dec 29 15:23:28 EST 2020
Archived on: Tue Dec 29 15:24:10 EST 2020

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...