January 2014 Archives by date

Messages sorted by: [ thread ] [ subject ] [ author ]
More info on this list...

Starting: Wed Jan 1 01:00:40 EST 2014
Ending: Fri Jan 31 12:57:14 EST 2014
Messages: 342

[PATCH] mips asm/types.h: add #ifndef to fix compile error u74147 at gmail.com
[PATCH] mips asm/types.h: add #ifndef to fix compile error Sascha Hauer
[PATCH] lib: fix whitespace, drop blank lines at EOF Sascha Hauer
[PATCH] lib: libubigen math compile error fix Robert Jarzmik
[PATCH 1/5] miitool: change behaviour closer to linux' mii-tool Sascha Hauer
Porting Barebox to i.MX6QDL "Novena" Sean Cross
November spi changes Sascha Hauer
[PATCH] oftree command: Allow free stored dtb before load Sascha Hauer
[PATCH v2] of: find also nodes by mixture of alias and path Sascha Hauer
[PATCH] lib: libubigen math compile error fix Sascha Hauer
Porting Barebox to i.MX6QDL "Novena" Sascha Hauer
[PATCH v2] of: find also nodes by mixture of alias and path Jan Weitzel
[PATCH v2] of: find also nodes by mixture of alias and path Sascha Hauer
[PATCH v3] of: find also nodes by mixture of alias and path Jan Weitzel
[PATCH v2] of: find also nodes by mixture of alias and path Jan Weitzel
Porting Barebox to i.MX6QDL "Novena" Sean Cross
[PATCH] MIPS: csrc-r4k: use CLOCKSOURCE_MASK() macro Antony Pavlov
Porting Barebox to i.MX6QDL "Novena" Sascha Hauer
UBI patches Sascha Hauer
[PATCH 1/9] UBI: Fix PEB leak in wear_leveling_worker() Sascha Hauer
[PATCH 2/9] UBI: Fix invalidate_fastmap() Sascha Hauer
[PATCH 3/9] UBI: fix refill_wl_user_pool() Sascha Hauer
[PATCH 4/9] UBI: Fix error path in scan_pool() Sascha Hauer
[PATCH 5/9] UBI: Call scan_all() with correct offset in error case Sascha Hauer
[PATCH 6/9] UBI: fastmap: fix backward compatibility with image_seq Sascha Hauer
[PATCH 7/9] UBI: simplify image sequence test Sascha Hauer
[PATCH 8/9] UBI: Fix memory leak in ubi_attach_fastmap() error path Sascha Hauer
[PATCH 9/9] UBI: Add some asserts to ubi_attach_fastmap() Sascha Hauer
USB chipidea patches Sascha Hauer
[PATCH 1/4] usb: chipidea i.MX: remove unused pdata->init hook Sascha Hauer
[PATCH 2/4] usb: chipidea i.MX: limit port init to HSIC mode Sascha Hauer
[PATCH 3/4] usb: chipidea i.MX: always print an error message when ULPI fails Sascha Hauer
[PATCH 4/4] usb: chipidea i.MX: add some delay after ulpi_setup Sascha Hauer
v2014.01.0 Sascha Hauer
[PATCH 01/10] ARM: imx6: pull imx6qdl-pingrp.h from linux Lucas Stach
[PATCH 02/10] ARM: imx6q: update sabrelite DT Lucas Stach
[PATCH 03/10] ARM: imx6: update SabreSD DTs Lucas Stach
[PATCH 04/10] ARM: imx6: update phytec-pfla02 DT Lucas Stach
[PATCH 05/10] ARM: imx6: update Carrier-1 DTs Lucas Stach
[PATCH 06/10] ARM: imx6: update TQ DTs Lucas Stach
[PATCH 07/10] ARM: imx6: update GK802 DT Lucas Stach
[PATCH 08/10] ARM: imx6: update DMO RealQ7 DT Lucas Stach
[PATCH 09/10] ARM: imx6: update DFI FS700 M60 DT Lucas Stach
[PATCH 10/10] ARM: imx6: remove old pingroups Lucas Stach
[PATCH] of: platform: Fix possible crash Alexander Shiyan
[PATCH] Make number of GPT partitions a configurable option Santosh Sivaraj
[PATCH 1/2] ARM: i.MX51: Sync DT files with kernel Alexander Shiyan
[PATCH 2/2] ARM: freescale-mx51-pdk: Remove FEC GPIO handling Alexander Shiyan
[PATCH] Make number of GPT partitions a configurable option Sascha Hauer
Porting barebox (devicetree) to Variscite iMX6 SOM Michael Burkey
[PATCH] Make number of GPT partitions a configurable option Jean-Christophe PLAGNIOL-VILLARD
[PATCH 1/2] ARM: i.MX53: dts: move QSB pmic to own file Steffen Trumtrar
[PATCH 2/2] ARM: i.MX53: dts: add support for MCIMX53-START-R Steffen Trumtrar
[PATCH] Make number of GPT partitions a configurable option Santosh Sivaraj
[PATCH 0/3] gpiolib: add checks and error message Antony Pavlov
[PATCH 1/3] gpiolib: gpio_request(): print message on error Antony Pavlov
[PATCH 2/3] gpiolib: gpio_free: clear gpio's "label" field too Antony Pavlov
[PATCH 3/3] gpiolib: gpiolib command: show label only for requested pins Antony Pavlov
Porting barebox (devicetree) to Variscite iMX6 SOM Michael Burkey
[PATCH] of: platform: Fix possible crash Sascha Hauer
[PATCH 1/2] ARM: i.MX51: Sync DT files with kernel Sascha Hauer
Re: [PATCH 1/2] ARM: i.MX51: Sync DT files with kernel Alexander Shiyan
Porting barebox (devicetree) to Variscite iMX6 SOM Sascha Hauer
[PATCH] Make number of GPT partitions a configurable option Sascha Hauer
[PATCH 1/2] ARM: i.MX51: Sync DT files with kernel Sascha Hauer
Porting barebox (devicetree) to Variscite iMX6 SOM Sascha Hauer
[PATCH 01/10] ARM: imx6: pull imx6qdl-pingrp.h from linux Sascha Hauer
[PATCH] Make number of GPT partitions a configurable option Jean-Christophe PLAGNIOL-VILLARD
[PATCH] Make number of GPT partitions a configurable option Sascha Hauer
[PATCH 1/2] mci: Support the correct version for eMMC Markus Niebel
[PATCH 2/2] mci: production year for eMMC 4.41 and later Markus Niebel
[PATCH 0/3] gpiolib: add checks and error message Sascha Hauer
Re: [PATCH 2/3] mci: imx-esdhc: add DSR support Alexander Shiyan
[RFC] mci: add DSR support Markus Niebel
[PATCH 1/3] mci: add DSR support Markus Niebel
[PATCH 2/3] mci: imx-esdhc: add DSR support Markus Niebel
[PATCH 3/3] boards: tqma53: add DSR support for eMMC Markus Niebel
[PATCH 2/2] ARM: i.MX53: dts: add support for MCIMX53-START-R Sascha Hauer
[PATCH v3] of: find also nodes by mixture of alias and path Sascha Hauer
[PATCH 2/2] ARM: i.MX53: dts: add support for MCIMX53-START-R Steffen Trumtrar
[PATCH v2 1/2] ARM: i.MX53: dts: move QSB pmic to own file Steffen Trumtrar
[PATCH v2 2/2] ARM: i.MX53: dts: add support for MCIMX53-START-R Steffen Trumtrar
[PATCH 2/3] mci: imx-esdhc: add DSR support Markus Niebel
[PATCH 1/2] ARM: i.MX: Add correct SoC type detection for i.MX6 Sascha Hauer
[PATCH 2/2] ARM: i.MX6: correct work flow of PFDs from uboot-sources Sascha Hauer
bootm + devicetree + much memory Sascha Hauer
[PATCH 1/8] list: add list_first_entry_or_null() Sascha Hauer
[PATCH 2/8] bootm: introduce bootm_load_os helper Sascha Hauer
[PATCH 3/8] ARM: bootm: move os loading to do_bootm_linux Sascha Hauer
[PATCH 4/8] bootm: introduce bootm_load_initrd helper Sascha Hauer
[PATCH 5/8] bootm: introduce bootm_load_devicetree helper Sascha Hauer
[PATCH 6/8] ARM: bootm: locate zImage higher into RAM Sascha Hauer
[PATCH 7/8] ARM: bootm: determine RAM start in separate function Sascha Hauer
[PATCH 8/8] ARM: bootm: pass free memory to __do_bootm_linux Sascha Hauer
[PATCH 1/3] mci: add DSR support Sascha Hauer
[PATCH 1/3] mci: add DSR support Markus Niebel
[PATCH] ARM: make Phytec and Freescale naming more consistent Sascha Hauer
[PATCH 1/2] mci: Support the correct version for eMMC Sascha Hauer
[PATCH 1/3] ARM: i.MX DFI FS700-M60: Add SPI NOR flash support Sascha Hauer
[PATCH 2/3] ARM: i.MX DFI FS700-M60: Add SPI NOR flash update handler Sascha Hauer
[PATCH 3/3] ARM: i.MX DFI FS700-M60: Update for new boards Sascha Hauer
[PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Lucas Stach
[PATCH 2/9] dt-bindings: import input.h Lucas Stach
[PATCH 3/9] dt-bindings: import irq.h Lucas Stach
[PATCH 4/9] ARM: imx6: update pin related DT headers Lucas Stach
[PATCH 5/9] ARM: imx6: update base DTs Lucas Stach
[PATCH 6/9] ARM: imx6: split sabrelite DT Lucas Stach
[PATCH 7/9] ARM: imx6: add support for DL variant of SabreLite Board Lucas Stach
[PATCH 8/9] ARM: imx6: add initial support for Nitrogen6X boards Lucas Stach
[PATCH 9/9] ARM: imx6: rename Carrier-1 to Hummingboard Lucas Stach
[PATCH 1/3] mci: add DSR support Sascha Hauer
[PATCH] net/phy: add driver for National Semiconductor DP83865 PHY Antony Pavlov
[PATCH] fs ubifs: Use pr_* for printing messages Sascha Hauer
[PATCH] hummingboard: fix entryfunction for real Lucas Stach
[PATCH v2 0/4] mmc: add setdsr support Markus Niebel
[PATCH 1/4] mci: add DSR support Markus Niebel
[PATCH 2/4] mci: add device tree support for DSR Markus Niebel
[PATCH 3/4] mci: imx-esdhc: add DSR support Markus Niebel
[PATCH 4/4] boards: tqma53: add DSR support for eMMC Markus Niebel
[PATCH 3/4] mci: imx-esdhc: add DSR support Alexander Aring
AW: [PATCH 3/4] mci: imx-esdhc: add DSR support Markus Niebel
[PATCH 1/9] ARM: imx53: guard voipac vmx53 init function Sascha Hauer
[PATCH] net/phy: add driver for National Semiconductor DP83865 PHY Sascha Hauer
[PATCH 1/2] ARM: dts: rename imx6q-dmo-realq7.dts to imx6q-dmo-edmqmx6.dts Sascha Hauer
[PATCH 2/2] ARM: dts: change dmo, imx6q-realq7 compatible to dmo, imx6q-edmqmx6 Sascha Hauer
[PATCH] ARM: SAMA5D3: Fix PLL registry mapping Mathieu Anquetin
[PATCH 1/2] ARM: dts: rename imx6q-dmo-realq7.dts to imx6q-dmo-edmqmx6.dts Sascha Hauer
[PATCH 1/2] ARM: dts: rename imx6q-dmo-realq7.dts to imx6q-dmo-edmqmx6.dts Alexander Aring
[PATCH 0/5] ppc: Import latest U-Boot code Renaud Barbier
[PATCH 1/5] ppc: cpu-85xx: upgrade MMU support to v2 pages sizes Renaud Barbier
[PATCH 2/5] ppc: mpc85xx: use common linker script Renaud Barbier
[PATCH 3/5] ppc: mpc85xx: change bss relocation Renaud Barbier
[PATCH 4/5] ppc: cpu-85xx: import U-Boot start-up code Renaud Barbier
[PATCH 5/5] cpu-85xx: start.S: clean up imported code Renaud Barbier
[PATCH v2 0/4] mmc: add setdsr support Sascha Hauer
Porting barebox (devicetree) to Variscite iMX6 SOM Michael Burkey
[PATCH v2 1/2] ARM: i.MX53: dts: move QSB pmic to own file Sascha Hauer
[PATCH 1/2] ARM: dts: rename imx6q-dmo-realq7.dts to imx6q-dmo-edmqmx6.dts Sascha Hauer
[PATCH 0/5] ppc: Import latest U-Boot code Sascha Hauer
Porting barebox (devicetree) to Variscite iMX6 SOM Sascha Hauer
[PATCH 1/2] ARM: dts: rename imx6q-dmo-realq7.dts to imx6q-dmo-edmqmx6.dts Alexander Aring
Porting barebox (devicetree) to Variscite iMX6 SOM Michael Burkey
[PATCH] net: phy: Fix crash when no phy is found Sascha Hauer
phyCARD-i.MX27 patches Sascha Hauer
[PATCH 01/22] ARM: Karo TX25: register external NAND boot update handler Sascha Hauer
[PATCH 02/22] ARM: phyCARD-i.MX27: increase barebox partition Sascha Hauer
[PATCH 03/22] ARM: phyCARD-i.MX27: register barebox update handler Sascha Hauer
[PATCH 04/22] ARM: phyCARD-i.MX27: switch to new environment Sascha Hauer
[PATCH 05/22] ARM: phyCARD-i.MX27: convert lowlevel init to c code Sascha Hauer
[PATCH 06/22] ARM: i.MX27: Add missing MPLL clock sources Sascha Hauer
[PATCH 07/22] ARM: phyCARD-i.MX27: Update defconfig Sascha Hauer
[PATCH 08/22] ARM: Fix image size calculation for CONFIG_PBL_RELOCATABLE Sascha Hauer
[PATCH 09/22] ARM: i.MX: external NAND boot: factor out a 2k pagesize detection function Sascha Hauer
[PATCH 10/22] ARM: i.MX: external NAND boot: create function macro for different SoCs Sascha Hauer
[PATCH 11/22] ARM: i.MX: external NAND boot: make it work with relocatable PBL Sascha Hauer
[PATCH 12/22] ARM: dts: Add i.MX27 devicetree files Sascha Hauer
[PATCH 13/22] ARM: dts: Add Phytec phyCARD-i.MX27 devicetree files Sascha Hauer
[PATCH 14/22] ARM: i.MX: external NAND boot: pass boarddata Sascha Hauer
[PATCH 15/22] pinctrl: Add pinctrl driver for i.MX1/21/27 Sascha Hauer
[PATCH 16/22] ARM: i.MX clocksource: return successful for multiple instances Sascha Hauer
[PATCH 17/22] ARM: phycard-i.MX27: Add NAND support to dts Sascha Hauer
[PATCH 18/22] ARM: phycard-i.MX27: Add stdout-path property Sascha Hauer
[PATCH 19/22] ARM: dts: phycard-i.MX27: Add environment and NAND partitioning Sascha Hauer
[PATCH 20/22] ARM: dts: phycard-i.MX27: Add sdhc2 pinctrl Sascha Hauer
[PATCH 21/22] mci: imx: Add devicetree probe support Sascha Hauer
[PATCH 22/22] ARM: phyCARD-i.MX27: Switch to devicetree probe support Sascha Hauer
Re: [PATCH 15/22] pinctrl: Add pinctrl driver for i.MX1/21/27 Alexander Shiyan
[PATCH] hummingboard: fix entryfunction for real Sascha Hauer
Re: [PATCH 19/22] ARM: dts: phycard-i.MX27: Add environment and NAND partitioning Alexander Shiyan
Re: [PATCH 13/22] ARM: dts: Add Phytec phyCARD-i.MX27 devicetree files Alexander Shiyan
Re: [PATCH 12/22] ARM: dts: Add i.MX27 devicetree files Alexander Shiyan
[PATCH 15/22] pinctrl: Add pinctrl driver for i.MX1/21/27 Sascha Hauer
[PATCH 13/22] ARM: dts: Add Phytec phyCARD-i.MX27 devicetree files Sascha Hauer
[PATCH] ARM: mioa701: fix frequence speedup code Robert Jarzmik
[PATCH] ARM: pxa: add reset source detection Robert Jarzmik
[PATCH] ARM: pxa: add poweroff capability Robert Jarzmik
[PATCH] ARM: mioa701 defconfig update Robert Jarzmik
[PATCH] ARM: mioa701 change MTD layout Robert Jarzmik
[PATCH] ARM: mioa701: poweroff the board on long power press Robert Jarzmik
[PATCH 00/13] MIPS: add initial Loongson-based boards support Antony Pavlov
[PATCH 01/13] MIPS: add initial Loongson-based boards support Antony Pavlov
[PATCH 02/13] MIPS: add initial Loongson-family documentation Antony Pavlov
[PATCH 03/13] MIPS: add Loongson-1B CPU Kbuild stuff Antony Pavlov
[PATCH 04/13] MIPS: add initial Loongson-1X SoC stuff Antony Pavlov
[PATCH 05/13] MIPS: add Loongson-1B processor constants and CPU probe Antony Pavlov
[PATCH 06/13] MIPS: mach-loongson: add loongson-ls1b board Antony Pavlov
[PATCH 07/13] MIPS: mach-loongson: add DEBUG_LL support Antony Pavlov
[PATCH 08/13] MIPS: loongson-ls1b: add DEBUG_LL support Antony Pavlov
[PATCH 09/13] MIPS: loongson-ls1b: add ns16550-based console Antony Pavlov
[PATCH 10/13] MIPS: loongson-ls1b: add PBL support Antony Pavlov
[PATCH 11/13] MIPS: loongson-ls1b: add NMON support Antony Pavlov
[PATCH 12/13] MIPS: loongson-ls1b: add documentation Antony Pavlov
[PATCH 13/13] MIPS: add loongson-ls1b_defconfig Antony Pavlov
[PATCH 20/22] ARM: dts: phycard-i.MX27: Add sdhc2 pinctrl Alexander Aring
[PATCH 02/22] ARM: phyCARD-i.MX27: increase barebox partition Alexander Aring
[PATCH 02/22] ARM: phyCARD-i.MX27: increase barebox partition Alexander Aring
Porting barebox (devicetree) to Variscite iMX6 SOM Sascha Hauer
[PATCH 02/22] ARM: phyCARD-i.MX27: increase barebox partition Sascha Hauer
[PATCH 19/22] ARM: dts: phycard-i.MX27: Add environment and NAND partitioning Sascha Hauer
[PATCH 20/22] ARM: dts: phycard-i.MX27: Add sdhc2 pinctrl Sascha Hauer
[PATCH] console: Set Linux console parameter automatically Sascha Hauer
[PATCH] net: Fix error return value for string_to_ethaddr Sascha Hauer
TQ tqma53 devicetree support Sascha Hauer
[PATCH 1/3] ARM: dts: Add TQ tqma53/mba53 dts files Sascha Hauer
[PATCH 2/3] ARM: dts: i.MX53: tqma53: Add barebox specifics Sascha Hauer
[PATCH 3/3] ARM: i.MX53: tqma53: Switch to devicetree and multiboard support Sascha Hauer
[PATCH] ARM: mioa701: fix frequence speedup code Sascha Hauer
[PATCH 2/3] ARM: dts: i.MX53: tqma53: Add barebox specifics Alexander Aring
[PATCH 00/13] MIPS: add initial Loongson-based boards support Sascha Hauer
[PATCH 2/3] ARM: dts: i.MX53: tqma53: Add barebox specifics Sascha Hauer
[PATCH 2/3] ARM: dts: i.MX53: tqma53: Add barebox specifics Sascha Hauer
[PATCH] ARM: i.MX6 Sabrelite: add missing of_machine_is_compatible checks Sascha Hauer
[PATCH 2/3] ARM: dts: i.MX53: tqma53: Add barebox specifics Alexander Aring
[PATCH 00/13] MIPS: add initial Loongson-based boards support Sascha Hauer
[PATCH 00/13] MIPS: add initial Loongson-based boards support Antony Pavlov
[PATCH 0/4] Asix AX88772B support Philipp Zabel
[PATCH 1/4] net usb asix: Simplify condition in rx_fixup() Philipp Zabel
[PATCH 2/4] net usb asix: Use only 11 bits of header for data size Philipp Zabel
[PATCH 4/4] net usb asix: add AX88772B USB ID Philipp Zabel
[RFC PATCH 0/2] Bootmode override on i.MX6 Philipp Zabel
[RFC PATCH 1/2] ARM i.MX6: Add bootmode setting code Philipp Zabel
[RFC PATCH 2/2] commands: add bootmode command Philipp Zabel
[PATCH 0/4] Asix AX88772B support Marek Vasut
[PATCH 00/13] MIPS: add initial Loongson-based boards support Sascha Hauer
[PATCH 00/13] MIPS: add initial Loongson-based boards support Antony Pavlov
[PATCH 00/13] MIPS: add initial Loongson-based boards support Sascha Hauer
[PATCH 0/4] Asix AX88772B support Sascha Hauer
[PATCH 00/13] MIPS: add initial Loongson-based boards support Antony Pavlov
compile fixes Sascha Hauer
[PATCH 1/3] environment: Use accessor functions for default environment path Sascha Hauer
[PATCH 2/3] environment: Fix wrong Kconfig dependency Sascha Hauer
[PATCH 3/3] net: phy: Add static inline wrapper for phy_register_fixup_for_uid Sascha Hauer
[PATCH 1/4] mfd: syscon: Introduce syscon_base_lookup_by_phandle() function Alexander Shiyan
[PATCH 2/4] ARM: clps711x: Remove the special name for the syscon driver Alexander Shiyan
[PATCH 3/4] gpio: clps711x: Update driver Alexander Shiyan
[PATCH 4/4] serial: clps711x: Update driver Alexander Shiyan
[PATCH 0/3] dove: cubox: ethernet support Michael Grzeschik
[PATCH 1/3] ARM: mvebu: make dove_memory_find reachable for drivers Michael Grzeschik
[PATCH 2/3] net: mv643xx: add driver support Michael Grzeschik
[PATCH 3/3] ARM: mvebu: add ethernet node Michael Grzeschik
[PATCH 2/3] net: mv643xx: add driver support Sebastian Hesselbarth
[PATCH 2/3] net: mv643xx: add driver support Michael Grzeschik
[PATCH 2/3] net: mv643xx: add driver support Sebastian Hesselbarth
[PATCH 1/4] mfd: syscon: Introduce syscon_base_lookup_by_phandle() function Sascha Hauer
[PATCH 2/3] net: mv643xx: add driver support Michael Grzeschik
[PATCH 2/3] net: mv643xx: add driver support Sebastian Hesselbarth
[PATCH 01/12] ARM: animeo_ip: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 02/12] ARM: guf-cupid: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 03/12] ARM: tqma6x: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 04/12] ARM: uncompress: Remove unused variable Alexander Shiyan
[PATCH 05/12] ARM: PBL: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 06/12] lib: bootz: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 07/12] lib: bootm: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 08/12] ARM: at91: boot_test_cmd: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 09/12] ARM: at91: irq_fixup: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 10/12] ARM: i.MX: external_nand_boot: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 11/12] ARM: i.MX: esdctl: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 12/12] ARM: i.MX: esdctl-v4: Use __iomem specifier for memory pointer Alexander Shiyan
[PATCH 1/4] dt-bindings: add ARM GIC Lucas Stach
[PATCH 2/4] dt-bindings: add Tegra GPIO Lucas Stach
[PATCH 3/4] dt-bindings: add Tegra CAR Lucas Stach
[PATCH 4/4] ARM: dts: pull in complete DTs from Linux 3.13 Lucas Stach
[PATCH] scripts: kwbimage: fix imagebuild on 32bit host system Michael Grzeschik
[PATCH v2] scripts: kwbimage: fix imagebuild on 32bit host system Michael Grzeschik
[PATCH v2] scripts: kwbimage: fix imagebuild on 32bit host system Sebastian Hesselbarth
[PATCH v2] scripts: kwbimage: fix imagebuild on 32bit host system Sascha Hauer
[PATCH 1/4] dt-bindings: add ARM GIC Sascha Hauer
[PATCH 00/13] MIPS: add initial Loongson-based boards support Sascha Hauer
[PATCH 0/4] Asix AX88772B support Sascha Hauer
[RFC PATCH 2/2] commands: add bootmode command Sascha Hauer
[PATCH] ARM: i.MX53: fix bootsource_instance detection Sascha Hauer
[PATCH 1/2] reset_source: rename set_reset_source to reset_source_set Sascha Hauer
[PATCH 2/2] reset_source: add reset_source_get Sascha Hauer
[PATCH] env: make path arguments to envfs_load/save const Sascha Hauer
i.mx21 ads nor flash Cristiano De Alti
i.mx21 ads nor flash Sascha Hauer
[PATCH 3/4] net usb asix: read MAC from EEPROM on AX88772B Philipp Zabel
[PATCH 01/12] ARM: animeo_ip: Use __iomem specifier for memory pointer Sascha Hauer
[PATCH 1/2] misc Kconfig: always ask for misc devices Sascha Hauer
[PATCH 2/2] misc: Add devicetree SRAM driver Sascha Hauer
[PATCH] images: remove unused command Sascha Hauer
[PATCH 1/4] ARM: Make thumb2 compilation only visible on CPUs that support it Sascha Hauer
[PATCH 2/4] ARM: Pass armv7-a AFLAGS to cache-v7 Sascha Hauer
[PATCH 3/4] ARM: Do not use BUG() in pbl code Sascha Hauer
[PATCH 4/4] ARM: mode cpu_architecture() to common.c Sascha Hauer
Re: [PATCH 2/2] misc: Add devicetree SRAM driver Alexander Shiyan
[PATCH 1/3] scripts: fix_size: check magic Sascha Hauer
[PATCH 2/3] images: fix image size in pblx Sascha Hauer
[PATCH 3/3] ARM: i.MX: external NAND boot: use image size from image header Sascha Hauer
[PATCH 0/3] DA923RC: enable UBIFS support to allow firmware flash booting Renaud Barbier
[PATCH 1/3] ppc: remove bit operation headers file conflict Renaud Barbier
[PATCH 2/3] UBIFS: implement readlink entry point Renaud Barbier
[PATCH 3/3] DA923RC: enable UBI/UBIFS configuration Renaud Barbier
[PATCH 08/12] ARM: at91: boot_test_cmd: Use __iomem specifier for memory pointer Jean-Christophe PLAGNIOL-VILLARD
[PATCH 01/12] ARM: animeo_ip: Use __iomem specifier for memory pointer Jean-Christophe PLAGNIOL-VILLARD
[PATCH 1/4] MIPS: mach-ar231x: Fix uninitialized variable Alexander Shiyan
[PATCH 2/4] ppc 8xxx: Fix logic Alexander Shiyan
[PATCH 3/4] gadget: at91: Fix uninitialized variable Alexander Shiyan
[PATCH 4/4] scripts: imx-usb-loader: Fix memory leak Alexander Shiyan
[PATCH 2/2] misc: Add devicetree SRAM driver Sascha Hauer
[PATCH 1/4] MIPS: mach-ar231x: Fix uninitialized variable Sascha Hauer
Porting barebox (devicetree) to Variscite iMX6 SOM Michael Burkey
Porting barebox (devicetree) to Variscite iMX6 SOM Michael Burkey
[PATCH 00/13] MIPS: add initial Loongson-based boards support Antony Pavlov
Re: [PATCH 2/2] misc: Add devicetree SRAM driver Alexander Shiyan
Re: [PATCH 1/4] MIPS: mach-ar231x: Fix uninitialized variable Alexander Shiyan
[PATCH 2/2] misc: Add devicetree SRAM driver Jean-Christophe PLAGNIOL-VILLARD
[PATCH 2/2] misc: Add devicetree SRAM driver Sascha Hauer
[PATCH 0/3] DA923RC: enable UBIFS support to allow firmware flash booting Sascha Hauer
[PATCH 1/2] ARM: i.MX: edmqmx6: Copy fdt to SDRAM Sascha Hauer
[PATCH 2/2] ARM: i.MX: edmqmx6: update defconfig Sascha Hauer
[PATCH 00/13] MIPS: add initial Loongson-based boards support Sascha Hauer
[PATCH 1/2] ARM: i.MX: edmqmx6: Copy fdt to SDRAM Jan Lübbe
[PATCH 1/2] ARM: i.MX: edmqmx6: Copy fdt to SDRAM Sascha Hauer
[PATCH 00/13] MIPS: add initial Loongson-based boards support Antony Pavlov
[PATCH 00/13] MIPS: add initial Loongson-based boards support Antony Pavlov
[PATCH] Load PBL into SRAM David Vincent
Hello from Kalifah Mn.Kalifah
Hello from Kalifah Mn.Kalifah
[PATCH 00/13] MIPS: add initial Loongson-based boards support Sascha Hauer
[PATCH] Load PBL into SRAM Sascha Hauer
[PATCH 2/2] misc: Add devicetree SRAM driver Jean-Christophe PLAGNIOL-VILLARD
[PATCH] Load PBL into SRAM David Vincent
i.MX25 devicetree support Sascha Hauer
[PATCH 01/15] mci: imx-esdhc: Add i.MX25 compatible entry Sascha Hauer
[PATCH 02/15] ARM: dts: Add i.MX25 devicetree files Sascha Hauer
[PATCH 03/15] ARM: dts: i.MX25: Add mmc aliases Sascha Hauer
[PATCH 04/15] ARM: dts: i.MX25: remove disabled status of usbmisc unit Sascha Hauer
[PATCH 05/15] ARM: i.MX25: Add missing GPT clock lookups Sascha Hauer
[PATCH 06/15] ARM: dts: Add i.MX25 Karo TX25 dts Sascha Hauer
[PATCH 07/15] ARM: dts: i.MX25: Add iram to devicetree Sascha Hauer
[PATCH 08/15] ARM: dts: Karo TX25: Add pinctrl nodes Sascha Hauer
[PATCH 09/15] ARM: dts: Karo TX25: Add phy-reset-gpio Sascha Hauer
[PATCH 10/15] ARM: dts: Karo TX25: add missing nfc properties Sascha Hauer
[PATCH 11/15] ARM: dts: Karo TX25: add phy supply for fec Sascha Hauer
[PATCH 12/15] ARM: dts: Karo TX25: add barebox specifics Sascha Hauer
[PATCH 13/15] ARM: i.MX25: Karo TX25: Switch to devicetree support Sascha Hauer
[PATCH 14/15] ARM: i.MX: cleanup bootmode selection Sascha Hauer
[PATCH 15/15] ARM: i.MX: Karo TX25: Switch to multiboard support Sascha Hauer
[PATCH] ARM: i.MX: Add lowlevel gpio functions Sascha Hauer
Re: [PATCH 13/15] ARM: i.MX25: Karo TX25: Switch to devicetree support Alexander Shiyan
[PATCH 1/3] scripts: fix_size: check magic Sascha Hauer

Last message date: Fri Jan 31 12:57:14 EST 2014
Archived on: Fri Jan 31 12:57:39 EST 2014

Messages sorted by: [ thread ] [ subject ] [ author ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).