[PATCH 02/22] ARM: phyCARD-i.MX27: increase barebox partition

[Sascha Hauer]

More place for barebox.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/phycard-i.MX27/env/config | 2 +-
 arch/arm/boards/phycard-i.MX27/pca100.c   | 5 +++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boards/phycard-i.MX27/env/config b/arch/arm/boards/phycard-i.MX27/env/config
index 9596311..9f10e7d 100644
--- a/arch/arm/boards/phycard-i.MX27/env/config
+++ b/arch/arm/boards/phycard-i.MX27/env/config
@@ -39,7 +39,7 @@ autoboot_timeout=3
 
 bootargs="console=ttymxc0,115200"
 
-nand_parts="256k(barebox)ro,128k(bareboxenv),2M(kernel),-(root)"
+nand_parts="512k(barebox)ro,512k(bareboxenv),2M(kernel),-(root)"
 rootfs_mtdblock_nand=7
 
 # set a fancy prompt (if support is compiled in)
diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c
index 2ff1b79..7ac0bf6 100644
--- a/arch/arm/boards/phycard-i.MX27/pca100.c
+++ b/arch/arm/boards/phycard-i.MX27/pca100.c
@@ -21,6 +21,7 @@
 #include <mach/imx27-regs.h>
 #include <fec.h>
 #include <gpio.h>
+#include <sizes.h>
 #include <asm/armlinux.h>
 #include <asm/sections.h>
 #include <generated/mach-types.h>
@@ -287,10 +288,10 @@ static int pca100_devices_init(void)
 #endif
 
 	nand = get_device_by_name("nand0");
-	devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
+	devfs_add_partition("nand0", 0x00000, SZ_512K, DEVFS_PARTITION_FIXED, "self_raw");
 	dev_add_bb_dev("self_raw", "self0");
 
-	devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
+	devfs_add_partition("nand0", SZ_512K, SZ_512K, DEVFS_PARTITION_FIXED, "env_raw");
 	dev_add_bb_dev("env_raw", "env0");
 
 	armlinux_set_architecture(2149);
-- 
1.8.5.2