[PATCH 07/22] ARM: phyCARD-i.MX27: Update defconfig

[Sascha Hauer]

This enables a lot of new features in the defconfig:
- Image compression
- FAT support
- Ext4 support
- UBIFS support
- more commands

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/configs/pca100_defconfig | 43 ++++++++++++++++++++++++++-------------
 1 file changed, 29 insertions(+), 14 deletions(-)

diff --git a/arch/arm/configs/pca100_defconfig b/arch/arm/configs/pca100_defconfig
index db2b164..12753cf 100644
--- a/arch/arm/configs/pca100_defconfig
+++ b/arch/arm/configs/pca100_defconfig
@@ -1,57 +1,64 @@
 CONFIG_ARCH_IMX=y
 CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND=y
-CONFIG_ARCH_IMX27=y
 CONFIG_MACH_PCA100=y
-CONFIG_IMX_CLKO=y
 CONFIG_AEABI=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
+CONFIG_PBL_IMAGE=y
 CONFIG_MMU=y
 CONFIG_MALLOC_SIZE=0x01000000
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_LONGHELP=y
-CONFIG_GLOB=y
 CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
-CONFIG_PARTITION=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_MENU=y
+CONFIG_BLSPEC=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/phycard-i.MX27/env"
+CONFIG_RESET_SOURCE=y
 CONFIG_CMD_EDIT=y
 CONFIG_CMD_SLEEP=y
+CONFIG_CMD_MSLEEP=y
 CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_LOADENV=y
 CONFIG_CMD_EXPORT=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_READLINE=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_FILETYPE=y
 CONFIG_CMD_ECHO_E=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MTEST=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
 CONFIG_CMD_BOOTM_VERBOSE=y
 CONFIG_CMD_BOOTM_INITRD=y
 CONFIG_CMD_BOOTM_OFTREE=y
-CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
 CONFIG_CMD_UIMAGE=y
-# CONFIG_CMD_BOOTZ is not set
 # CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_BAREBOX_UPDATE=y
 CONFIG_CMD_TIMEOUT=y
 CONFIG_CMD_PARTITION=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
 CONFIG_NET=y
 CONFIG_NET_DHCP=y
 CONFIG_NET_PING=y
-CONFIG_CMD_TFTP=y
-CONFIG_FS_TFTP=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_DRIVER_NET_FEC_IMX=y
 CONFIG_NET_USB=y
@@ -62,9 +69,17 @@ CONFIG_NAND=y
 # CONFIG_NAND_ECC_SOFT is not set
 # CONFIG_NAND_ECC_HW_SYNDROME is not set
 CONFIG_NAND_IMX=y
-CONFIG_UBI=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_USB=y
 CONFIG_USB_EHCI=y
 CONFIG_USB_ULPI=y
-CONFIG_ZLIB=y
-CONFIG_LZO_DECOMPRESS=y
+CONFIG_MCI=y
+CONFIG_MCI_IMX=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_FS_UBIFS=y
+CONFIG_FS_UBIFS_COMPRESSION_LZO=y
-- 
1.8.5.2