[PATCH 3/3] boards: tqma53: add DSR support for eMMC

[Markus Niebel]

From: Markus Niebel <Markus.Niebel at tqs.de>

all eMMC cards with DSR support used on different
revisions of TQMa53 needs the same DSR value.
just apply it.

Signed-off-by: Markus Niebel <Markus.Niebel at tqs.de>
---
 arch/arm/boards/tqma53/board.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boards/tqma53/board.c b/arch/arm/boards/tqma53/board.c
index 9069f7c..cc98de9 100644
--- a/arch/arm/boards/tqma53/board.c
+++ b/arch/arm/boards/tqma53/board.c
@@ -39,6 +39,8 @@
 #include <mach/iim.h>
 #include <mach/imx5.h>
 
+#define TQMA53_EMMC_DSR 0x0100u
+
 static struct fec_platform_data fec_info = {
 	.xcv_type = PHY_INTERFACE_MODE_RMII,
 };
@@ -221,6 +223,8 @@ static struct esdhc_platform_data tqma53_sd3_data = {
 	.cd_type = ESDHC_CD_PERMANENT,
 	.wp_type = ESDHC_WP_NONE,
 	.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.use_dsr = 1,
+	.dsr_val = TQMA53_EMMC_DSR,
 };
 
 static int tqma53_devices_init(void)
-- 
1.7.9.5