April 2022 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Apr 1 00:23:30 PDT 2022
Ending: Sat Apr 30 22:44:40 PDT 2022
Messages: 854

• [PATCH -next] jffs2: fix memory leak in jffs2_do_fill_super   libaokun (A)
• [PATCH V8] mtd: spi-nor: winbond: add support for W25Q512NW-IM   Sajida Bhanu (Temp)
• [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• FW: [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH V2] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH V3] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH V2] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH V4] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH V3] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH V5] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH V4] mtd: rawnand: qcom: fix memory corruption that causes panic   Md Sadre Alam
• [PATCH v3 0/9] mtd: spi-nor: Rework Octal DTR methods   Tudor Ambarus
• [PATCH v3 1/9] mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name   Tudor Ambarus
• [PATCH v3 2/9] mtd: spi-nor: Introduce spi_nor_match_id()   Tudor Ambarus
• [PATCH v3 3/9] mtd: spi-nor: core: Use auto-detection only once   Tudor Ambarus
• [PATCH v3 4/9] mtd: spi-nor: core: Introduce method for RDID op   Tudor Ambarus
• [PATCH v3 5/9] mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method   Tudor Ambarus
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Tudor Ambarus
• [PATCH v3 7/9] mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()   Tudor Ambarus
• [PATCH v3 8/9] mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()   Tudor Ambarus
• [PATCH v3 9/9] mtd: spi-nor: Introduce templates for SPI NOR operations   Tudor Ambarus
• [PATCH v3 0/3] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode   Tudor Ambarus
• [PATCH v3 1/3] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Tudor Ambarus
• [PATCH v3 2/3] mtd: spi-nor: Update name and description of the set_4byte_addr_mode BFPT methods   Tudor Ambarus
• [PATCH v3 3/3] mtd: spi-nor: Favor the BFPT-parsed set_4byte_addr_mode method   Tudor Ambarus
• [mtd-www][PATCH] doc: nand: Remove CONFIG_MTD_BLOCK as required config for JFFS2 on NAND   Tudor Ambarus
• [mtd-www][PATCH] doc: nand: Add note about CONFIG_MTD_CHAR   Tudor Ambarus
• [PATCH v4 00/11] mtd: spi-nor: Rework Octal DTR methods   Tudor Ambarus
• [PATCH v4 01/11] mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name   Tudor Ambarus
• [PATCH v4 02/11] mtd: spi-nor: Introduce spi_nor_match_id()   Tudor Ambarus
• [PATCH v4 03/11] mtd: spi-nor: core: Use auto-detection only once   Tudor Ambarus
• [PATCH v4 04/11] mtd: spi-nor: core: Introduce method for RDID op   Tudor Ambarus
• [PATCH v4 05/11] mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method   Tudor Ambarus
• [PATCH v4 06/11] mtd: spi-nor: core: Add helpers to read/write any register   Tudor Ambarus
• [PATCH v4 07/11] mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()   Tudor Ambarus
• [PATCH v4 08/11] mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()   Tudor Ambarus
• [PATCH v4 09/11] mtd: spi-nor: Introduce templates for SPI NOR operations   Tudor Ambarus
• [PATCH v4 10/11] mtd: spi-nor: spansion: Remove status polling on volatile registers write   Tudor Ambarus
• [PATCH v4 11/11] mtd: spi-nor: micron-st: Remove status polling on volatile registers write   Tudor Ambarus
• [PATCH] MTD: NAND: Select timings for Kioxia TH58NVG3S0HBAI4   Rickard Andersson
• [PATCH] mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4   Rickard Andersson
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Neil Armstrong
• use block_device based APIs in block layer consumers v3   Jens Axboe
• [PATCH] fs/jffs2: Fix potential NULL dereference in jffs2_add_frag_to_fragtree()   Haowen Bai
• [PATCH] jffs2: Use kzalloc instead of kmalloc/memset   Haowen Bai
• [PATCH 0/5] mtd: onenand: samsung: Add support for device tree   Jonathan Bakker
• [PATCH 1/5] dt-bindings: mtd: samsung-onenand: Add new binding   Jonathan Bakker
• [PATCH 2/5] mtd: onenand: samsung: Set name field of mtd_info struct   Jonathan Bakker
• [PATCH 3/5] mtd: onenand: samsung: Unify resource order for controller variants   Jonathan Bakker
• [PATCH 4/5] mtd: onenand: samsung: Make sure that bus clock is enabled   Jonathan Bakker
• [PATCH 5/5] mtd: onenand: samsung: Add device tree support   Jonathan Bakker
• [PATCH] dt-bindings: Drop empty and unreferenced binding .txt files   Alexandre Belloni
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH 01/48] ARM: pxa: split mach/generic.h   Arnd Bergmann
• [PATCH 02/48] ARM: pxa: make mainstone.h private   Arnd Bergmann
• [PATCH 03/48] ARM: pxa: make mach/regs-uart.h private   Arnd Bergmann
• [PATCH 04/48] ARM: pxa: remove mach/dma.h   Arnd Bergmann
• [PATCH 05/48] ARM: pxa: split up mach/hardware.h   Arnd Bergmann
• [PATCH 06/48] ARM: pxa: stop using mach/bitfield.h   Arnd Bergmann
• [PATCH 07/48] ARM: pxa: move mach/sound.h to linux/platform_data/   Arnd Bergmann
• [PATCH 08/48] ARM: pxa: move regs-lcd.h into driver   Arnd Bergmann
• [PATCH 09/48] watchdog: sa1100: use platform device registration   Arnd Bergmann
• [PATCH 10/48] ARM: pxa: pxa2xx-ac97-lib: use IRQ resource   Arnd Bergmann
• [PATCH 11/48] ARM: pxa: move pcmcia board data into mach-pxa   Arnd Bergmann
• [PATCH 12/48] ARM: pxa: make addr-map.h header local   Arnd Bergmann
• [PATCH 13/48] ARM: pxa: use pdev resource for palmld mmio   Arnd Bergmann
• [PATCH 14/48] ARM: pxa: maybe fix gpio lookup tables   Arnd Bergmann
• [PATCH 15/48] ARM: pxa: tosa: use gpio descriptor for audio   Arnd Bergmann
• [PATCH 16/48] ARM: pxa: poodle: use platform data for poodle asoc driver   Arnd Bergmann
• [PATCH 17/48] ARM: pxa: corgi: use gpio descriptors for audio   Arnd Bergmann
• [PATCH 18/48] ARM: pxa: hx4700: use gpio descriptors for audio   Arnd Bergmann
• [PATCH 19/48] ARM: pxa: lubbock: pass udc irqs as resource   Arnd Bergmann
• [PATCH 20/48] ARM: pxa: spitz: use gpio descriptors for audio   Arnd Bergmann
• [PATCH 21/48] ARM: pxa: eseries: use gpio lookup for audio   Arnd Bergmann
• [PATCH 22/48] ARM: pxa: z2: use gpio lookup for audio device   Arnd Bergmann
• [PATCH 23/48] ARM: pxa: magician: use platform driver for audio   Arnd Bergmann
• [PATCH 24/48] ARM: pxa: mainstone-wm97xx: use gpio lookup table   Arnd Bergmann
• [PATCH 25/48] ARM: pxa: zylonite: use gpio lookup instead mfp header   Arnd Bergmann
• [PATCH 26/48] input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration   Arnd Bergmann
• [PATCH 27/48] input: touchscreen: mainstone: sync with zylonite driver   Arnd Bergmann
• [PATCH 28/48] Input: touchscreen: use wrapper for pxa2xx ac97 registers   Arnd Bergmann
• [PATCH 29/48] Input: wm97xx - switch to using threaded IRQ   Arnd Bergmann
• [PATCH 30/48] Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops   Arnd Bergmann
• [PATCH 31/48] ASoC: pxa: use pdev resource for FIFO regs   Arnd Bergmann
• [PATCH 32/48] ASoC: pxa: ac97: use normal MMIO accessors   Arnd Bergmann
• [PATCH 33/48] ASoC: pxa: i2s: use normal MMIO accessors   Arnd Bergmann
• [PATCH 34/48] ARM: pxa: pcmcia: move smemc configuration back to arch   Arnd Bergmann
• [PATCH 35/48] ARM: pxa: remove get_clk_frequency_khz()   Arnd Bergmann
• [PATCH 36/48] cpufreq: pxa3: move clk register access to clk driver   Arnd Bergmann
• [PATCH 37/48] ARM: pxa: move smemc register access from clk to platform   Arnd Bergmann
• [PATCH 38/48] ARM: pxa: move clk register definitions to driver   Arnd Bergmann
• [PATCH 39/48] power: tosa: simplify probe function   Arnd Bergmann
• [PATCH 40/48] ARM: pxa: tosa: use gpio lookup for battery   Arnd Bergmann
• [PATCH 41/48] ARM: pxa: remove unused mach/bitfield.h   Arnd Bergmann
• [PATCH 42/48] ARM: mmp: remove tavorevb board support   Arnd Bergmann
• [PATCH 43/48] ARM: mmp: rename pxa_register_device   Arnd Bergmann
• [PATCH 44/48] ARM: pxa: move plat-pxa to drivers/soc/   Arnd Bergmann
• [PATCH 45/48] ARM: PXA: fix multi-cpu build of xsc3   Arnd Bergmann
• [PATCH 46/48] ARM: pxa: move mach/*.h to mach-pxa/   Arnd Bergmann
• [PATCH 47/48] ARM: pxa: remove support for MTD_XIP   Arnd Bergmann
• [PATCH 48/48] ARM: pxa: convert to multiplatform   Arnd Bergmann
• [PATCH 40/48] ARM: pxa: tosa: use gpio lookup for battery   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH v2 00/48] ARM: PXA multiplatform support   Arnd Bergmann
• [PATCH V9] mtd: spi-nor: winbond: add support for W25Q512NW-IM   Shaik Sajida Bhanu
• [PATCH] fscrypt: split up FS_CRYPTO_BLOCK_SIZE   Eric Biggers
• [f2fs-dev] [PATCH] fscrypt: split up FS_CRYPTO_BLOCK_SIZE   Eric Biggers
• [PATCH 1/2] mtd: spinand: add support for detection with param page   Boris Brezillon
• [PATCH v2 2/3] mtd: spinand: add support for detection with param page   Boris Brezillon
• [PATCH v2 2/3] mtd: spinand: add support for detection with param page   Boris Brezillon
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Mark Brown
• (subset) [PATCH 1/2] mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path   Mark Brown
• [PATCH] dt-bindings: align SPI NOR node name with dtschema   Mark Brown
• [PATCH v4 1/5] mtd: nand: make mtk_ecc.c a separated module   Mark Brown
• [PATCH 2/2] spi: intel: Implement dirmap hooks   Mark Brown
• [PATCH 1/2] spi: intel: Fix typo in kernel-doc of intel_spi_probe()   Mark Brown
• [PATCH v2] spi: intel: Implement dirmap hooks   Mark Brown
• [PATCH v6 0/5] spi: add support for Mediatek SPI-NAND controller   Mark Brown
• [PATCH v6 0/5] spi: add support for Mediatek SPI-NAND controller   Mark Brown
• (subset) [PATCH v6 0/5] spi: add support for Mediatek SPI-NAND controller   Mark Brown
• [PATCH v6 5/5] arm64: dts: mediatek: add mtk-snfi for mt7622   Matthias Brugger
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD   Keith Busch
• [PATCH] mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash   Andreas Böhler
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD   Christoph Böhmwalder
• [Drbd-dev] [PATCH 04/27] drbd: remove assign_p_sizes_qlim   Christoph Böhmwalder
• [bug report] mtd: spi-nor: add the framework for SPI NOR   Dan Carpenter
• Hello,   Seyba Daniel
• [PATCH v3 0/3] mtd: mtdoops: Add timestamp to the dumped oops header.   Jean-Marc Eurin
• [PATCH v3 1/3] mtd: mtdoops: Fix the size of the header read buffer.   Jean-Marc Eurin
• [PATCH v3 2/3] mtd: mtdoops: Create a header structure for the saved mtdoops.   Jean-Marc Eurin
• [PATCH v3 3/3] mtd: mtdoops: Add a timestamp to the mtdoops header.   Jean-Marc Eurin
• [PATCH v4 0/3] mtd: mtdoops: Add timestamp to the dumped oops header.   Jean-Marc Eurin
• [PATCH v4 1/3] mtd: mtdoops: Fix the size of the header read buffer.   Jean-Marc Eurin
• [PATCH v4 2/3] mtd: mtdoops: Create a header structure for the saved mtdoops.   Jean-Marc Eurin
• [PATCH v4 3/3] mtd: mtdoops: Add a timestamp to the mtdoops header.   Jean-Marc Eurin
• [PATCH v4 0/3] mtd: mtdoops: Add timestamp to the dumped oops header.   Jean-Marc Eurin
• [PATCH] spi-nor: fix spi_nor_probe   Pascal Fabreges
• [PATCH] mtdblock: warn if opened on NAND   Ezequiel Garcia
• [PATCH] mtdblock: warn if opened on NAND   Ezequiel Garcia
• [PATCH] mtd: spi-nor: support eon en25qh256a variant   Leon M. George
• [PATCH] mtd: spi-nor: support eon en25   Leon M. George
• [PATCH] mtd: spi-nor: support eon en25qh256a variant   Leon M. George
• [PATCH v4 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem   Cédric Le Goater
• [PATCH v4 04/11] spi: aspeed: Add support for direct mapping   Cédric Le Goater
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Cédric Le Goater
• [PATCH v4 0/5] spi: add support for Mediatek SPI-NAND controller   Daniel Golle
• Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Daniel Golle
• [RFC PATCH 0/5] partition parser for U-Boot's uImage.FIT   Daniel Golle
• [RFC PATCH 1/5] block: add new flag to add partitions read-only   Daniel Golle
• [RFC PATCH 2/5] block: add partition parser for U-Boot uImage.FIT   Daniel Golle
• [RFC PATCH 3/5] partitions/efi: add support for uImage.FIT sub-partitions   Daniel Golle
• [RFC PATCH 4/5] mtd_blkdevs: scan partitions on mtdblock if FIT_PARTITION is set   Daniel Golle
• [RFC PATCH 5/5] mtd/ubi/block: scan for partitions in case FIT_PARTITION is set   Daniel Golle
• [RFC PATCH 4/5] mtd_blkdevs: scan partitions on mtdblock if FIT_PARTITION is set   Daniel Golle
• [RFC PATCH 4/5] mtd_blkdevs: scan partitions on mtdblock if FIT_PARTITION is set   Daniel Golle
• [Cluster-devel] [PATCH 23/27] block: add a bdev_max_discard_sectors helper   Andreas Gruenbacher
• [PATCH] mtd: rawnand: fix ecc parameters for mt7622   Chuanhong Guo
• [PATCH 0/4] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH 1/4] mtd: nand: make mtk_ecc.c a separated module   Chuanhong Guo
• [PATCH 2/4] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH 3/4] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH 4/4] arm64: dts: mediatek: add dt node for MTK SNFI   Chuanhong Guo
• [PATCH resend 0/4] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH resend 1/4] mtd: nand: make mtk_ecc.c a separated module   Chuanhong Guo
• [PATCH resend 2/4] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH resend 3/4] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH resend 4/4] arm64: dts: mediatek: add dt node for MTK SNFI   Chuanhong Guo
• [PATCH 3/4] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH 3/4] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v2 0/5] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH v2 1/5] mtd: nand: make mtk_ecc.c a separated module   Chuanhong Guo
• [PATCH v2 2/5] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH v2 3/5] mtd: nand: mtk-ecc: also parse nand-ecc-engine if available   Chuanhong Guo
• [PATCH v2 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v2 5/5] arm64: dts: mediatek: add mtk-snfi for mt7622   Chuanhong Guo
• [PATCH v2 2/5] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH v2 2/5] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH v2 2/5] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH v3 0/5] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH v3 1/5] mtd: nand: make mtk_ecc.c a separated module   Chuanhong Guo
• [PATCH v3 2/5] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH v3 3/5] mtd: nand: mtk-ecc: also parse nand-ecc-engine if available   Chuanhong Guo
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v3 5/5] arm64: dts: mediatek: add mtk-snfi for mt7622   Chuanhong Guo
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH] mtd: spinand: Add support for XTX XT26G0xA   Chuanhong Guo
• [PATCH v4 0/5] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH v4 1/5] mtd: nand: make mtk_ecc.c a separated module   Chuanhong Guo
• [PATCH v4 2/5] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH v4 3/5] mtd: nand: mtk-ecc: also parse nand-ecc-engine if available   Chuanhong Guo
• [PATCH v4 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v4 5/5] arm64: dts: mediatek: add mtk-snfi for mt7622   Chuanhong Guo
• [PATCH] mtd: nand: separate ecc-mxic from nandcore   Chuanhong Guo
• [PATCH v4 1/5] mtd: nand: make mtk_ecc.c a separated module   Chuanhong Guo
• [PATCH v5 0/5] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH v5 1/5] mtd: nand: make mtk_ecc.c a separated module   Chuanhong Guo
• [PATCH v5 2/5] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH v5 3/5] mtd: nand: mtk-ecc: also parse nand-ecc-engine if available   Chuanhong Guo
• [PATCH v5 4/5] spi: dt-bindings: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v5 5/5] arm64: dts: mediatek: add mtk-snfi for mt7622   Chuanhong Guo
• [PATCH] mtd: spinand: add support for ESMT F50x1G41LB   Chuanhong Guo
• [PATCH] mtd: spinand: add support for ESMT F50x1G41LB   Chuanhong Guo
• [PATCH v2] mtd: spinand: add support for ESMT F50x1G41LB   Chuanhong Guo
• [PATCH v2] mtd: spinand: add support for ESMT F50x1G41LB   Chuanhong Guo
• [PATCH 0/2] mtd: spinand: add support for detection with param page   Chuanhong Guo
• [PATCH 1/2] mtd: spinand: add support for detection with param page   Chuanhong Guo
• [PATCH 2/2] mtd: spinand: probe Winbond W25N01GV/W using param page   Chuanhong Guo
• [PATCH 1/2] mtd: spinand: add support for detection with param page   Chuanhong Guo
• [PATCH v2 0/3] mtd: spinand: add support for detection with param page   Chuanhong Guo
• [PATCH v2 1/3] mtd: nand: extract some onfi functions to nandcore   Chuanhong Guo
• [PATCH v2 2/3] mtd: spinand: add support for detection with param page   Chuanhong Guo
• [PATCH v2 3/3] mtd: spinand: probe Winbond W25N01GV/W using param page   Chuanhong Guo
• [PATCH v2 2/3] mtd: spinand: add support for detection with param page   Chuanhong Guo
• [PATCH v2 3/3] mtd: spinand: probe Winbond W25N01GV/W using param page   Chuanhong Guo
• [PATCH v5 0/5] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH v6 0/5] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH v6 1/5] mtd: nand: make mtk_ecc.c a separated module   Chuanhong Guo
• [PATCH v6 2/5] spi: add driver for MTK SPI NAND Flash Interface   Chuanhong Guo
• [PATCH v6 3/5] mtd: nand: mtk-ecc: also parse nand-ecc-engine if available   Chuanhong Guo
• [PATCH v6 4/5] spi: dt-bindings: add binding doc for spi-mtk-snfi   Chuanhong Guo
• [PATCH v6 5/5] arm64: dts: mediatek: add mtk-snfi for mt7622   Chuanhong Guo
• [PATCH v6 0/5] spi: add support for Mediatek SPI-NAND controller   Chuanhong Guo
• [PATCH] mtd: nand: ecc-mtk: add external ecc engine support   Chuanhong Guo
• [PATCH] mtd: nand: ecc-mtk: add external ecc engine support   Chuanhong Guo
• [PATCH] mtd-utils: nanddump: fix writing big images on 32bit machines   Sascha Hauer
• use block_device based APIs in block layer consumers   Christoph Hellwig
• [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction   Christoph Hellwig
• [PATCH 02/27] target: pass a block_device to target_configure_unmap_from_queue   Christoph Hellwig
• [PATCH 03/27] target: fix discard alignment on partitions   Christoph Hellwig
• [PATCH 04/27] drbd: remove assign_p_sizes_qlim   Christoph Hellwig
• [PATCH 05/27] drbd: use bdev based limit helpers in drbd_send_sizes   Christoph Hellwig
• [PATCH 06/27] drbd: cleanup decide_on_discard_support   Christoph Hellwig
• [PATCH 07/27] btrfs: use bdev_max_active_zones instead of open coding it   Christoph Hellwig
• [PATCH 08/27] ntfs3: use bdev_logical_block_size instead of open coding it   Christoph Hellwig
• [PATCH 09/27] mm: use bdev_is_zoned in claim_swapfile   Christoph Hellwig
• [PATCH 10/27] block: add a bdev_nonrot helper   Christoph Hellwig
• [PATCH 11/27] block: add a bdev_write_cache helper   Christoph Hellwig
• [PATCH 12/27] block: add a bdev_fua helper   Christoph Hellwig
• [PATCH 13/27] block: add a bdev_stable_writes helper   Christoph Hellwig
• [PATCH 14/27] block: add a bdev_max_zone_append_sectors helper   Christoph Hellwig
• [PATCH 15/27] block: use bdev_alignment_offset in part_alignment_offset_show   Christoph Hellwig
• [PATCH 16/27] drbd: use bdev_alignment_offset instead of queue_alignment_offset   Christoph Hellwig
• [PATCH 17/27] block: use bdev_alignment_offset in disk_alignment_offset_show   Christoph Hellwig
• [PATCH 18/27] block: move bdev_alignment_offset and queue_limit_alignment_offset out of line   Christoph Hellwig
• [PATCH 19/27] block: remove queue_discard_alignment   Christoph Hellwig
• [PATCH 20/27] block: use bdev_discard_alignment in part_discard_alignment_show   Christoph Hellwig
• [PATCH 21/27] block: move {bdev, queue_limit}_discard_alignment out of line   Christoph Hellwig
• [PATCH 22/27] block: refactor discard bio size limiting   Christoph Hellwig
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper   Christoph Hellwig
• [PATCH 24/27] block: add a bdev_discard_granularity helper   Christoph Hellwig
• [PATCH 25/27] block: remove QUEUE_FLAG_DISCARD   Christoph Hellwig
• [PATCH 26/27] block: uncouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Christoph Hellwig
• [PATCH 27/27] direct-io: remove random prefetches   Christoph Hellwig
• [PATCH 07/27] btrfs: use bdev_max_active_zones instead of open coding it   Christoph Hellwig
• use block_device based APIs in block layer consumers v2   Christoph Hellwig
• [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction   Christoph Hellwig
• [PATCH 02/27] target: pass a block_device to target_configure_unmap_from_queue   Christoph Hellwig
• [PATCH 03/27] target: fix discard alignment on partitions   Christoph Hellwig
• [PATCH 04/27] drbd: remove assign_p_sizes_qlim   Christoph Hellwig
• [PATCH 05/27] drbd: use bdev based limit helpers in drbd_send_sizes   Christoph Hellwig
• [PATCH 06/27] drbd: use bdev_alignment_offset instead of queue_alignment_offset   Christoph Hellwig
• [PATCH 07/27] drbd: cleanup decide_on_discard_support   Christoph Hellwig
• [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it   Christoph Hellwig
• [PATCH 09/27] ntfs3: use bdev_logical_block_size instead of open coding it   Christoph Hellwig
• [PATCH 10/27] mm: use bdev_is_zoned in claim_swapfile   Christoph Hellwig
• [PATCH 11/27] block: add a bdev_nonrot helper   Christoph Hellwig
• [PATCH 12/27] block: add a bdev_write_cache helper   Christoph Hellwig
• [PATCH 13/27] block: add a bdev_fua helper   Christoph Hellwig
• [PATCH 14/27] block: add a bdev_stable_writes helper   Christoph Hellwig
• [PATCH 15/27] block: add a bdev_max_zone_append_sectors helper   Christoph Hellwig
• [PATCH 16/27] block: use bdev_alignment_offset in part_alignment_offset_show   Christoph Hellwig
• [PATCH 17/27] block: use bdev_alignment_offset in disk_alignment_offset_show   Christoph Hellwig
• [PATCH 18/27] block: move bdev_alignment_offset and queue_limit_alignment_offset out of line   Christoph Hellwig
• [PATCH 19/27] block: remove queue_discard_alignment   Christoph Hellwig
• [PATCH 20/27] block: use bdev_discard_alignment in part_discard_alignment_show   Christoph Hellwig
• [PATCH 21/27] block: move {bdev, queue_limit}_discard_alignment out of line   Christoph Hellwig
• [PATCH 22/27] block: refactor discard bio size limiting   Christoph Hellwig
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper   Christoph Hellwig
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD   Christoph Hellwig
• [PATCH 25/27] block: add a bdev_discard_granularity helper   Christoph Hellwig
• [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Christoph Hellwig
• [PATCH 27/27] direct-io: remove random prefetches   Christoph Hellwig
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD   Christoph Hellwig
• [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Christoph Hellwig
• use block_device based APIs in block layer consumers v3   Christoph Hellwig
• [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction   Christoph Hellwig
• [PATCH 02/27] target: pass a block_device to target_configure_unmap_from_queue   Christoph Hellwig
• [PATCH 03/27] target: fix discard alignment on partitions   Christoph Hellwig
• [PATCH 04/27] drbd: remove assign_p_sizes_qlim   Christoph Hellwig
• [PATCH 05/27] drbd: use bdev based limit helpers in drbd_send_sizes   Christoph Hellwig
• [PATCH 06/27] drbd: use bdev_alignment_offset instead of queue_alignment_offset   Christoph Hellwig
• [PATCH 07/27] drbd: cleanup decide_on_discard_support   Christoph Hellwig
• [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it   Christoph Hellwig
• [PATCH 09/27] ntfs3: use bdev_logical_block_size instead of open coding it   Christoph Hellwig
• [PATCH 10/27] mm: use bdev_is_zoned in claim_swapfile   Christoph Hellwig
• [PATCH 11/27] block: add a bdev_nonrot helper   Christoph Hellwig
• [PATCH 12/27] block: add a bdev_write_cache helper   Christoph Hellwig
• [PATCH 13/27] block: add a bdev_fua helper   Christoph Hellwig
• [PATCH 14/27] block: add a bdev_stable_writes helper   Christoph Hellwig
• [PATCH 15/27] block: add a bdev_max_zone_append_sectors helper   Christoph Hellwig
• [PATCH 16/27] block: use bdev_alignment_offset in part_alignment_offset_show   Christoph Hellwig
• [PATCH 17/27] block: use bdev_alignment_offset in disk_alignment_offset_show   Christoph Hellwig
• [PATCH 18/27] block: move bdev_alignment_offset and queue_limit_alignment_offset out of line   Christoph Hellwig
• [PATCH 19/27] block: remove queue_discard_alignment   Christoph Hellwig
• [PATCH 20/27] block: use bdev_discard_alignment in part_discard_alignment_show   Christoph Hellwig
• [PATCH 21/27] block: move {bdev, queue_limit}_discard_alignment out of line   Christoph Hellwig
• [PATCH 22/27] block: refactor discard bio size limiting   Christoph Hellwig
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper   Christoph Hellwig
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD   Christoph Hellwig
• [PATCH 25/27] block: add a bdev_discard_granularity helper   Christoph Hellwig
• [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Christoph Hellwig
• [PATCH 27/27] direct-io: remove random prefetches   Christoph Hellwig
• [RFC PATCH 4/5] mtd_blkdevs: scan partitions on mtdblock if FIT_PARTITION is set   Christoph Hellwig
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Rob Herring
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Rob Herring
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Rob Herring
• [PATCH] dt-bindings: mtd: jedec,spi-nor: remove unneeded properties   Rob Herring
• [PATCH] dt-bindings: align SPI NOR node name with dtschema   Rob Herring
• [PATCH v2] dt-bindings: mtd: jedec,spi-nor: remove unneeded properties   Rob Herring
• [PATCH v3 2/4] dt-bindings: reserved-memory: Support MTD/block device   Rob Herring
• [PATCH v3 3/4] mtd: phram: Allow probing via reserved-memory   Rob Herring
• [PATCH] dt-bindings: Drop empty and unreferenced binding .txt files   Rob Herring
• [PATCH] dt-bindings: Drop empty and unreferenced binding .txt files   Rob Herring
• No subject   Fiona Hill
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD   Jan Höppner
• [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it   Anand Jain
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Srinivas Kandagatla
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Srinivas Kandagatla
• [f2fs-dev] [PATCH 26/27] block: uncouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Jaegeuk Kim
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper   Ryusuke Konishi
• [PATCH 24/27] block: add a bdev_discard_granularity helper   Ryusuke Konishi
• [PATCH 26/27] block: uncouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Ryusuke Konishi
• [PATCH 3/4] dt-bindings: spi: add binding doc for spi-mtk-snfi   Krzysztof Kozlowski
• [PATCH resend 3/4] dt-bindings: spi: add binding doc for spi-mtk-snfi   Krzysztof Kozlowski
• [PATCH 3/4] dt-bindings: spi: add binding doc for spi-mtk-snfi   Krzysztof Kozlowski
• [PATCH v2 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Krzysztof Kozlowski
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Krzysztof Kozlowski
• [PATCH] dt-bindings: mtd: jedec,spi-nor: remove unneeded properties   Krzysztof Kozlowski
• [PATCH] dt-bindings: align SPI NOR node name with dtschema   Krzysztof Kozlowski
• [PATCH v4 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Krzysztof Kozlowski
• [PATCH] dt-bindings: align SPI NOR node name with dtschema   Krzysztof Kozlowski
• [PATCH] dt-bindings: mtd: jedec,spi-nor: remove unneeded properties   Krzysztof Kozlowski
• [PATCH v2] dt-bindings: mtd: jedec, spi-nor: remove unneeded properties   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Krzysztof Kozlowski
• [PATCH] memory: renesas-rpc-if: Simplify single/double data register access   Krzysztof Kozlowski
• [PATCH v4] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode   Krzysztof Kozlowski
• [PATCH v4] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode   Krzysztof Kozlowski
• [PATCH v2] memory: renesas-rpc-if: Simplify single/double data register access   Krzysztof Kozlowski
• [PATCH v2] memory: renesas-rpc-if: Simplify single/double data register access   Krzysztof Kozlowski
• [PATCH 0/5] mtd: onenand: samsung: Add support for device tree   Krzysztof Kozlowski
• [PATCH 1/5] dt-bindings: mtd: samsung-onenand: Add new binding   Krzysztof Kozlowski
• [PATCH 3/5] mtd: onenand: samsung: Unify resource order for controller variants   Krzysztof Kozlowski
• [PATCH 4/5] mtd: onenand: samsung: Make sure that bus clock is enabled   Krzysztof Kozlowski
• [PATCH 5/5] mtd: onenand: samsung: Add device tree support   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Krzysztof Kozlowski
• [PATCH 2/2] dt-bindings: mtd: qcom_nandc: document qcom,boot_pages binding   Krzysztof Kozlowski
• [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction   Chaitanya Kulkarni
• [PATCH 02/27] target: pass a block_device to target_configure_unmap_from_queue   Chaitanya Kulkarni
• [PATCH 03/27] target: fix discard alignment on partitions   Chaitanya Kulkarni
• [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it   Chaitanya Kulkarni
• [PATCH 10/27] mm: use bdev_is_zoned in claim_swapfile   Chaitanya Kulkarni
• [PATCH 11/27] block: add a bdev_nonrot helper   Chaitanya Kulkarni
• [PATCH 12/27] block: add a bdev_write_cache helper   Chaitanya Kulkarni
• [PATCH 13/27] block: add a bdev_fua helper   Chaitanya Kulkarni
• [PATCH 14/27] block: add a bdev_stable_writes helper   Chaitanya Kulkarni
• [PATCH 15/27] block: add a bdev_max_zone_append_sectors helper   Chaitanya Kulkarni
• [PATCH 16/27] block: use bdev_alignment_offset in part_alignment_offset_show   Chaitanya Kulkarni
• [PATCH 22/27] block: refactor discard bio size limiting   Chaitanya Kulkarni
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper   Chaitanya Kulkarni
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD   Chaitanya Kulkarni
• [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Chaitanya Kulkarni
• [PATCH v10 0/4] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t   Takahiro Kuwano
• [PATCH v11 1/3] mtd: spi-nor: spansion: Add support for volatile QE bit   Takahiro Kuwano
• [PATCH v11 1/3] mtd: spi-nor: spansion: Add support for volatile QE bit   Takahiro Kuwano
• [PATCH v11 2/3] mtd: spi-nor: spansion: Add local function to discover page size   Takahiro Kuwano
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Takahiro Kuwano
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Takahiro Kuwano
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Takahiro Kuwano
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Takahiro Kuwano
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Takahiro Kuwano
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Takahiro Kuwano
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Takahiro Kuwano
• [PATCH v12 2/6] mtd: spi-nor: core: Call set_4byte_addr_mode() before spi_nor_quad_enalbe()   Takahiro Kuwano
• [PATCH v12 3/6] mtd: spi-nor: spansion: Rename local macros   Takahiro Kuwano
• [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit   Takahiro Kuwano
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Takahiro Kuwano
• [PATCH v13 4/4] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Takahiro Kuwano
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Takahiro Kuwano
• [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit   Takahiro Kuwano
• [PATCH v13 3/4] mtd: spi-nor: spansion: Add local function to discover page size   Takahiro Kuwano
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Takahiro Kuwano
• [PATCH 1/2] mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path   Lad, Prabhakar
• [PATCH 2/2] spi: rpc-if: Fix RPM imbalance in probe error path   Lad, Prabhakar
• [PATCH v7 0/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Thorsten Leemhuis
• [PATCH -next] jffs2: fix memory leak in jffs2_do_fill_super   Baokun Li
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper   Coly Li
• [PATCH 25/27] block: remove QUEUE_FLAG_DISCARD   Coly Li
• [PATCH 26/27] block: uncouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Coly Li
• [PATCH 22/27] block: refactor discard bio size limiting   Coly Li
• [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Coly Li
• [PATCH] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miaoqian Lin
• [PATCH v2] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miaoqian Lin
• [PATCH v2] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miaoqian Lin
• [PATCH v2] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miaoqian Lin
• [PATCH v3] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miaoqian Lin
• [BUG] mtd: rawnand: denali_pci: page fault when probing fails   Zheyu Ma
• [PATCH] mtd: rawnand: Use managed device resources   Zheyu Ma
• [BUG] mtd: rawnand: denali_pci: page fault when probing fails   Zheyu Ma
• [PATCH v2] mtd: rawnand: denali: Use managed device resources   Zheyu Ma
• Biznesowy angielski   Krzysztof Maj
• [PATCH] mtd: spinand: Add support for XTX XT26G0xA   Felix Matouschek
• [PATCH] mtd: spinand: Add support for XTX XT26G0xA   Felix Matouschek
• [PATCH v2] mtd: spinand: Add support for XTX XT26G0xA   Felix Matouschek
• [PATCH] mtd: spinand: Add support for XTX XT26G0xA   Felix Matouschek
• [PATCH v2] mtd: spinand: Add support for XTX XT26G0xA   Felix Matouschek
• [PATCH v2] mtd: spinand: Add support for XTX XT26G0xA   Felix Matouschek
• [PATCH v3] mtd: spinand: Add support for XTX XT26G0xA   Felix Matouschek
• [PATCH v2] mtd: spinand: Add support for XTX XT26G0xA   Felix Matouschek
• Brauchen Sie einen Kredit?   Sandra Ortega Mera
• [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Rafał Miłecki
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Rafał Miłecki
• [PATCH] dt-bindings: mtd: partitions: add UBI binding   Rafał Miłecki
• [PATCH 14/27] block: add a bdev_max_zone_append_sectors helper   Damien Le Moal
• [PATCH 27/27] direct-io: remove random prefetches   Damien Le Moal
• [PATCH 10/27] mm: use bdev_is_zoned in claim_swapfile   Damien Le Moal
• [PATCH 13/48] ARM: pxa: use pdev resource for palmld mmio   Damien Le Moal
• [PATCH] mtdblock: warn if opened on NAND   Bjørn Mork
• [PATCH] mtdblock: warn if opened on NAND   Bjørn Mork
• [PATCH v4 0/4] memory: omap-gpmc: Add AM64 SoC support   Romain Naour
• [PATCH] mtd: fix 'part' field data corruption in mtd_info   Oleksandr Ocheretnyi
• [dm-devel] [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction   Martin K. Petersen
• [dm-devel] [PATCH 01/27] target: remove an incorrect unmap zeroes data deduction   Martin K. Petersen
• [PATCH 02/27] target: pass a block_device to target_configure_unmap_from_queue   Martin K. Petersen
• [dm-devel] [PATCH 03/27] target: fix discard alignment on partitions   Martin K. Petersen
• [dm-devel] [PATCH 14/27] block: add a bdev_max_zone_append_sectors helper   Martin K. Petersen
• [Ocfs2-devel] [PATCH 10/27] block: add a bdev_nonrot helper   Martin K. Petersen
• [Ocfs2-devel] [PATCH 11/27] block: add a bdev_write_cache helper   Martin K. Petersen
• [Ocfs2-devel] [PATCH 12/27] block: add a bdev_fua helper   Martin K. Petersen
• [Ocfs2-devel] [PATCH 13/27] block: add a bdev_stable_writes helper   Martin K. Petersen
• [Ocfs2-devel] [PATCH 15/27] block: use bdev_alignment_offset in part_alignment_offset_show   Martin K. Petersen
• [Ocfs2-devel] [PATCH 17/27] block: use bdev_alignment_offset in disk_alignment_offset_show   Martin K. Petersen
• [Ocfs2-devel] [PATCH 18/27] block: move bdev_alignment_offset and queue_limit_alignment_offset out of line   Martin K. Petersen
• [Ocfs2-devel] [PATCH 19/27] block: remove queue_discard_alignment   Martin K. Petersen
• [Ocfs2-devel] [PATCH 20/27] block: use bdev_discard_alignment in part_discard_alignment_show   Martin K. Petersen
• [Ocfs2-devel] [PATCH 21/27] block: move {bdev, queue_limit}_discard_alignment out of line   Martin K. Petersen
• [Ocfs2-devel] [PATCH 22/27] block: refactor discard bio size limiting   Martin K. Petersen
• [Ocfs2-devel] [PATCH 23/27] block: add a bdev_max_discard_sectors helper   Martin K. Petersen
• [Ocfs2-devel] [PATCH 24/27] block: add a bdev_discard_granularity helper   Martin K. Petersen
• [Ocfs2-devel] [PATCH 25/27] block: remove QUEUE_FLAG_DISCARD   Martin K. Petersen
• [Ocfs2-devel] [PATCH 26/27] block: uncouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Martin K. Petersen
• [PATCH 0/2] Hi3521a support.   Marty E. Plummer
• [PATCH] mtd: spi-nor: issi: Add IS25WP512 device   Rabara, Niravkumar L
• [PATCH v7 0/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Vignesh Raghavendra
• [PATCH v2 2/5] spi: add driver for MTK SPI NAND Flash Interface   Miquel Raynal
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH] mtd: spinand: Add support for XTX XT26G0xA   Miquel Raynal
• [PATCH] mtd: rawnand: fix ecc parameters for mt7622   Miquel Raynal
• [PATCH] mtd: parsers: bcm47xxpart: print correct offset on read error   Miquel Raynal
• [PATCH] mtd: rawnand: print offset instead of page number for bad blocks   Miquel Raynal
• [PATCH 5/5] mtd: spinand: gigadevice: add support for GD5FxGM7xExxG   Miquel Raynal
• [PATCH 4/5] mtd: spinand: gigadevice: add support for GD5F{2, 4}GQ5xExxG   Miquel Raynal
• [PATCH 3/5] mtd: spinand: gigadevice: add support for GD5F1GQ5RExxG   Miquel Raynal
• [PATCH 2/5] mtd: spinand: gigadevice: add support for GD5FxGQ4xExxG   Miquel Raynal
• [PATCH 1/5] mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxG   Miquel Raynal
• [PATCH -next] mtd: rawnand: davinci: Remove redundant unsigned comparison to zero   Miquel Raynal
• [PATCH v2 2/5] spi: add driver for MTK SPI NAND Flash Interface   Miquel Raynal
• [PATCH v3 4/5] dt-bindings: spi: add binding doc for spi-mtk-snfi   Miquel Raynal
• [PATCH v3 1/4] mtd: rawnand: gpmi: Refactor bch geometry settings function   Miquel Raynal
• [PATCH v3 2/4] mtd: rawnand: gpmi: Add strict ecc strength check   Miquel Raynal
• [PATCH v3 3/4] mtd: rawnand: gpmi: Rename the variable ecc_chunk_size   Miquel Raynal
• [PATCH] mtd: spinand: Add support for XTX XT26G0xA   Miquel Raynal
• [PATCH] dt-bindings: align SPI NOR node name with dtschema   Miquel Raynal
• [PATCH v4 1/5] mtd: nand: make mtk_ecc.c a separated module   Miquel Raynal
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH v4 1/5] mtd: nand: make mtk_ecc.c a separated module   Miquel Raynal
• [PATCH v2] mtd: spinand: Add support for XTX XT26G0xA   Miquel Raynal
• [PATCH v3 2/4] mtd: rawnand: gpmi: Add strict ecc strength check   Miquel Raynal
• [BUG] mtd: rawnand: denali_pci: page fault when probing fails   Miquel Raynal
• [PATCH v7 0/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH v2] dt-bindings: mtd: jedec, spi-nor: remove unneeded properties   Miquel Raynal
• [PATCH] mtd: maps: ixp4xx: Drop driver   Miquel Raynal
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Miquel Raynal
• [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Miquel Raynal
• [PATCH v3 3/3] mtd: rawnand: omap_elm: Add compatible for AM64 ELM   Miquel Raynal
• [PATCH v3 2/3] dt-bindings: mtd: ti, elm: Add support for AM64 ELM   Miquel Raynal
• [PATCH v3 1/3] dt-bindings: mtd: ti,elm: Convert to yaml   Miquel Raynal
• [PATCH 2/2] nvmem: add driver handling U-Boot environment variables   Miquel Raynal
• [PATCH] mtd: rawnand: Use managed device resources   Miquel Raynal
• [PATCH v2] mtd: spinand: Add support for XTX XT26G0xA   Miquel Raynal
• [PATCH v2] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miquel Raynal
• [PATCH v2] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miquel Raynal
• [PATCH v2] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miquel Raynal
• [PATCH v2] mtd: spinand: add support for ESMT F50x1G41LB   Miquel Raynal
• [PATCH v2] mtd: spinand: add support for ESMT F50x1G41LB   Miquel Raynal
• [PATCH v2] mtd: spinand: Add support for XTX XT26G0xA   Miquel Raynal
• [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic   Miquel Raynal
• [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic   Miquel Raynal
• [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic   Miquel Raynal
• [PATCH V2] mtd: rawnand: qcom: fix memory corruption that causes panic   Miquel Raynal
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Miquel Raynal
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Miquel Raynal
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Miquel Raynal
• [PATCH] mtd: nand: gpmi-nand: using pm_runtime_resume_and_get instead of pm_runtime_get_sync   Miquel Raynal
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Miquel Raynal
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Miquel Raynal
• [PATCH V5] mtd: rawnand: qcom: fix memory corruption that causes panic   Miquel Raynal
• [PATCH] mtd: fix 'part' field data corruption in mtd_info   Miquel Raynal
• [PATCH v3] mtd: rawnand: Fix return value check of wait_for_completion_timeout   Miquel Raynal
• [PATCH v3 3/3] mtd: mtdoops: Add a timestamp to the mtdoops header.   Miquel Raynal
• [PATCH v3 2/3] mtd: mtdoops: Create a header structure for the saved mtdoops.   Miquel Raynal
• [PATCH v3 1/3] mtd: mtdoops: Fix the size of the header read buffer.   Miquel Raynal
• [PATCH v3 4/4] mtd: phram: Allow cached mappings   Miquel Raynal
• [PATCH v3 3/4] mtd: phram: Allow probing via reserved-memory   Miquel Raynal
• [PATCH v3 2/4] dt-bindings: reserved-memory: Support MTD/block device   Miquel Raynal
• [PATCH v3 1/4] mtd: core: Check devicetree alias for index   Miquel Raynal
• [PATCH] mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash   Miquel Raynal
• [PATCH v3] mtd: spinand: Add support for XTX XT26G0xA   Miquel Raynal
• [PATCH v4 5/5] mtd: rawnand: gpmi: Add large oob bch setting support   Miquel Raynal
• [PATCH v4 4/5] mtd: rawnand: gpmi: Rename the variable ecc_chunk_size   Miquel Raynal
• [PATCH v4 3/5] mtd: rawnand: gpmi: Uninline the gpmi_check_ecc function   Miquel Raynal
• [PATCH v4 2/5] mtd: rawnand: gpmi: Add strict ecc strength check   Miquel Raynal
• [PATCH v4 1/5] mtd: rawnand: gpmi: Refactor bch geometry settings function   Miquel Raynal
• [PATCH v2] mtd: rawnand: denali: Use managed device resources   Miquel Raynal
• [PATCH] mtdblock: warn if opened on NAND   Miquel Raynal
• [PATCH] dt-bindings: Drop empty and unreferenced binding .txt files   Miquel Raynal
• [PATCH v3 4/4] mtd: phram: Allow cached mappings   Miquel Raynal
• [PATCH v3 4/4] mtd: phram: Allow cached mappings   Miquel Raynal
• Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions   Miquel Raynal
• [PATCH v4 0/3] mtd: mtdoops: Add timestamp to the dumped oops header.   Miquel Raynal
• [PATCH v4 0/3] mtd: mtdoops: Add timestamp to the dumped oops header.   Miquel Raynal
• [PATCH v4 3/3] mtd: mtdoops: Add a timestamp to the mtdoops header.   Miquel Raynal
• [PATCH v4 2/3] mtd: mtdoops: Create a header structure for the saved mtdoops.   Miquel Raynal
• [PATCH v4 1/3] mtd: mtdoops: Fix the size of the header read buffer.   Miquel Raynal
• [RFC PATCH 4/5] mtd_blkdevs: scan partitions on mtdblock if FIT_PARTITION is set   Miquel Raynal
• [PATCH] mtdblock: warn if opened on NAND   Miquel Raynal
• [PATCH v6 0/5] spi: add support for Mediatek SPI-NAND controller   Miquel Raynal
• [PATCH v7 0/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [GIT PULL] mtd: Fixes for 5.18-rc5   Miquel Raynal
• [PATCH v6 0/5] spi: add support for Mediatek SPI-NAND controller   Miquel Raynal
• [PATCH 3/3] mtd: rawnand: tmio: check return value after calling platform_get_resource()   Miquel Raynal
• [PATCH 2/3] mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()   Miquel Raynal
• [PATCH 1/3] mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()   Miquel Raynal
• [PATCH v6 0/5] spi: add support for Mediatek SPI-NAND controller   Miquel Raynal
• [PATCH v7 4/4] mtd: cfi_cmdset_0002: Rename chip_ready variables   Miquel Raynal
• [PATCH v7 3/4] mtd: cfi_cmdset_0002: Add S29GL064N ID definition   Miquel Raynal
• [PATCH v7 2/4] mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N   Miquel Raynal
• [PATCH v7 1/4] mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write   Miquel Raynal
• [PATCH] MTD: NAND: Select timings for Kioxia TH58NVG3S0HBAI4   Miquel Raynal
• [PATCH 0/3] mtd: rawnand: renesas: Runtime PM use   Miquel Raynal
• [PATCH 1/3] dt-bindings: mtd: renesas: Fix the NAND controller description   Miquel Raynal
• [PATCH 2/3] ARM: dts: r9a06g032: Fix the NAND controller node   Miquel Raynal
• [PATCH 3/3] mtd: rawnand: renesas: Use runtime PM instead of the raw clock API   Miquel Raynal
• [PATCH 40/48] ARM: pxa: tosa: use gpio lookup for battery   Sebastian Reichel
• [PATCH 15/27] block: use bdev_alignment_offset in part_alignment_offset_show   Alan Robinson
• [PATCH 09/48] watchdog: sa1100: use platform device registration   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• [PATCH v2 00/48] ARM: PXA multiplatform support   Guenter Roeck
• UBIFS Read only after corruption   Jakob Ruisinger
• UBIFS Read only after corruption   Jakob Ruisinger
• [PATCH] mtd: nand: raw: qcom_nandc: Don't clear_bam_transaction on READID   Manivannan Sadhasivam
• [PATCH] mtd: rawnand: qcom: fix memory corruption that causes panic   Manivannan Sadhasivam
• [PATCH V2] mtd: rawnand: qcom: fix memory corruption that causes panic   Manivannan Sadhasivam
• [PATCH V3] mtd: rawnand: qcom: fix memory corruption that causes panic   Manivannan Sadhasivam
• [PATCH V3] mtd: rawnand: qcom: fix memory corruption that causes panic   Manivannan Sadhasivam
• [PATCH V4] mtd: rawnand: qcom: fix memory corruption that causes panic   Manivannan Sadhasivam
• Richiedi la tua carta bancomat da 1,5 milioni   Samuel Sam
• [PATCH] memory: renesas-rpc-if: Simplify single/double data register access   Wolfram Sang
• [PATCH] memory: renesas-rpc-if: Simplify single/double data register access   Wolfram Sang
• [PATCH] memory: renesas-rpc-if: Simplify single/double data register access   Wolfram Sang
• No subject   Maria-Elisabeth Schaeffler
• [RESEND PATCH v3 0/2] Add nvmem support for dynamic partitions   Ansuel Smith
• [RESEND PATCH v3 1/2] dt-bindings: mtd: partitions: Document new partition-dynamic nodes   Ansuel Smith
• [RESEND PATCH v3 2/2] mtd: core: introduce of support for dynamic partitions   Ansuel Smith
• [PATCH 0/2] Add support for unprotected spare data page   Ansuel Smith
• [PATCH 1/2] mtd: nand: raw: qcom_nandc: add support for unprotected spare data pages   Ansuel Smith
• [PATCH 2/2] dt-bindings: mtd: qcom_nandc: document qcom, boot_pages binding   Ansuel Smith
• [PATCH 07/27] btrfs: use bdev_max_active_zones instead of open coding it   David Sterba
• [PATCH 10/27] block: add a bdev_nonrot helper   David Sterba
• [PATCH 11/27] block: add a bdev_write_cache helper   David Sterba
• [PATCH 23/27] block: add a bdev_max_discard_sectors helper   David Sterba
• [PATCH 24/27] block: add a bdev_discard_granularity helper   David Sterba
• [PATCH 26/27] block: uncouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   David Sterba
• [PATCH 08/27] btrfs: use bdev_max_active_zones instead of open coding it   David Sterba
• [PATCH 24/27] block: remove QUEUE_FLAG_DISCARD   David Sterba
• [PATCH 25/27] block: add a bdev_discard_granularity helper   David Sterba
• [PATCH 27/27] direct-io: remove random prefetches   David Sterba
• [PATCH v4 0/4] memory: omap-gpmc: Add AM64 SoC support   Grygorii Strashko
• [PATCH 07/27] btrfs: use bdev_max_active_zones instead of open coding it   Johannes Thumshirn
• [PATCH 14/27] block: add a bdev_max_zone_append_sectors helper   Johannes Thumshirn
• JFFS2 Summary causes OOPS   Joakim Tjernlund
• [PATCH v4] memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode   Geert Uytterhoeven
• [PATCH] memory: renesas-rpc-if: Simplify single/double data register access   Geert Uytterhoeven
• [PATCH] memory: renesas-rpc-if: Simplify single/double data register access   Geert Uytterhoeven
• [PATCH] memory: renesas-rpc-if: Simplify single/double data register access   Geert Uytterhoeven
• [PATCH v2] memory: renesas-rpc-if: Simplify single/double data register access   Geert Uytterhoeven
• [PATCH v2] memory: renesas-rpc-if: Simplify single/double data register access   Geert Uytterhoeven
• Antwort dringend erforderlich   Richard Wahl
• [PATCH v2 4/4] mtd: spi-nor: sfdp: Keep SFDP definitions private   Michael Walle
• [PATCH v3 1/3] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Michael Walle
• [PATCH v3 1/3] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Michael Walle
• [PATCH v3 2/3] mtd: spi-nor: Update name and description of the set_4byte_addr_mode BFPT methods   Michael Walle
• [PATCH v3 3/3] mtd: spi-nor: Favor the BFPT-parsed set_4byte_addr_mode method   Michael Walle
• [PATCH v3 1/3] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Michael Walle
• [PATCH] mtd: spi-nor: issi: Add IS25WP512 device   Michael Walle
• [PATCH v3 1/3] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Michael Walle
• [PATCH] mtd: spi-nor: issi: Add IS25WP512 device   Michael Walle
• [PATCH] mtd: spi-nor: move spi_nor_write_ear() to winbond module   Michael Walle
• [PATCH] mtd: spi-nor: move SECT_4K_PMC special handling   Michael Walle
• [PATCH] mtd: spi-nor: amend the rdsr dummy cycles documentation   Michael Walle
• [PATCH RFC v1 1/2] mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()   Michael Walle
• [PATCH RFC v1 2/2] mtd: spi-nor: expose internal parameters via debugfs   Michael Walle
• [PATCH RFC v1 2/2] mtd: spi-nor: expose internal parameters via debugfs   Michael Walle
• [PATCH v3 3/9] mtd: spi-nor: core: Use auto-detection only once   Michael Walle
• [PATCH v3 4/9] mtd: spi-nor: core: Introduce method for RDID op   Michael Walle
• [PATCH v3 5/9] mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method   Michael Walle
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Michael Walle
• [PATCH v3 7/9] mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()   Michael Walle
• [PATCH v3 8/9] mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()   Michael Walle
• [PATCH v3 9/9] mtd: spi-nor: Introduce templates for SPI NOR operations   Michael Walle
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Michael Walle
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Michael Walle
• [PATCH RFC v1 2/2] mtd: spi-nor: expose internal parameters via debugfs   Michael Walle
• [PATCH v4 10/11] mtd: spi-nor: spansion: Remove status polling on volatile registers write   Michael Walle
• [PATCH v4 11/11] mtd: spi-nor: micron-st: Remove status polling on volatile registers write   Michael Walle
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Michael Walle
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Michael Walle
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Michael Walle
• [PATCH V8] mtd: spi-nor: winbond: add support for W25Q512NW-IM   Michael Walle
• [PATCH v2 1/2] mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()   Michael Walle
• [PATCH v2 2/2] mtd: spi-nor: expose internal parameters via debugfs   Michael Walle
• [PATCH v2 2/2] mtd: spi-nor: expose internal parameters via debugfs   Michael Walle
• [PATCH v2] mtd: spi-nor: move spi_nor_write_ear() to winbond module   Michael Walle
• [PATCH v3 1/2] mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()   Michael Walle
• [PATCH v3 2/2] mtd: spi-nor: expose internal parameters via debugfs   Michael Walle
• [PATCH] mtd: maps: ixp4xx: Drop driver   Linus Walleij
• No subject   Major James Walton
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Richard Weinberger
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Richard Weinberger
• [PATCH 1/2] spi: intel: Fix typo in kernel-doc of intel_spi_probe()   Mika Westerberg
• [PATCH 2/2] spi: intel: Implement dirmap hooks   Mika Westerberg
• [PATCH 2/2] spi: intel: Implement dirmap hooks   Mika Westerberg
• [PATCH v2] spi: intel: Implement dirmap hooks   Mika Westerberg
• [PATCH v2 0/4] mtd: phram improvements   Vincent Whitchurch
• [PATCH v2 1/4] mtd: core: Check devicetree alias for index   Vincent Whitchurch
• [PATCH v2 2/4] dt-bindings: reserved-memory: Add phram   Vincent Whitchurch
• [PATCH v2 3/4] mtd: phram: Allow probing via reserved-memory   Vincent Whitchurch
• [PATCH v2 4/4] mtd: phram: Allow cached mappings   Vincent Whitchurch
• [PATCH v3 0/4] mtd: phram improvements   Vincent Whitchurch
• [PATCH v3 1/4] mtd: core: Check devicetree alias for index   Vincent Whitchurch
• [PATCH v3 2/4] dt-bindings: reserved-memory: Support MTD/block device   Vincent Whitchurch
• [PATCH v3 3/4] mtd: phram: Allow probing via reserved-memory   Vincent Whitchurch
• [PATCH v3 4/4] mtd: phram: Allow cached mappings   Vincent Whitchurch
• [PATCH v3 4/4] mtd: phram: Allow cached mappings   Vincent Whitchurch
• Wycena paneli fotowoltaicznych   Przemysław Wróblewski
• Wycena paneli fotowoltaicznych   Przemysław Wróblewski
• Wycena paneli fotowoltaicznych   Przemysław Wróblewski
• [PATCH v3 1/4] mtd: rawnand: gpmi: Refactor bch geometry settings function   Han Xu
• [PATCH v3 2/4] mtd: rawnand: gpmi: Add strict ecc strength check   Han Xu
• [PATCH v3 3/4] mtd: rawnand: gpmi: Rename the variable ecc_chunk_size   Han Xu
• [PATCH v3 4/4] mtd: rawnand: gpmi: Add large oob bch setting support   Han Xu
• [PATCH v3 2/4] mtd: rawnand: gpmi: Add strict ecc strength check   Han Xu
• [PATCH v4 0/5] Refactor bch settings and support large oob NAND   Han Xu
• [PATCH v4 1/5] mtd: rawnand: gpmi: Refactor bch geometry settings function   Han Xu
• [PATCH v4 2/5] mtd: rawnand: gpmi: Add strict ecc strength check   Han Xu
• [PATCH v4 3/5] mtd: rawnand: gpmi: Uninline the gpmi_check_ecc function   Han Xu
• [PATCH v4 4/5] mtd: rawnand: gpmi: Rename the variable ecc_chunk_size   Han Xu
• [PATCH v4 5/5] mtd: rawnand: gpmi: Add large oob bch setting support   Han Xu
• [PATCH v2 1/4] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Pratyush Yadav
• [PATCH v2 2/4] mtd: spi-nor: Update name and description of the set_4byte_addr_mode BFPT methods   Pratyush Yadav
• [PATCH v2 3/4] mtd: spi-nor: Favor the BFPT-parsed set_4byte_addr_mode method   Pratyush Yadav
• [PATCH v2 4/4] mtd: spi-nor: sfdp: Keep SFDP definitions private   Pratyush Yadav
• [PATCH v2] mtd: spi-nor: core: Skip setting erase types when SPI_NOR_NO_ERASE is set   Pratyush Yadav
• [PATCH v4 08/11] spi: aspeed: Calibrate read timings   Pratyush Yadav
• [PATCH v4 04/11] spi: aspeed: Add support for direct mapping   Pratyush Yadav
• [PATCH v4 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem   Pratyush Yadav
• [PATCH v2 4/4] mtd: spi-nor: sfdp: Keep SFDP definitions private   Pratyush Yadav
• [PATCH v4 1/6] mtd: spi-nor: core: Report correct name in case of ID collisions   Pratyush Yadav
• [PATCH v4 3/6] mtd: spi-nor: macronix: Handle ID collision b/w MX25L3233F and MX25L3205D   Pratyush Yadav
• [PATCH v2 4/4] mtd: spi-nor: sfdp: Keep SFDP definitions private   Pratyush Yadav
• [PATCH] dt-bindings: mtd: jedec,spi-nor: remove unneeded properties   Pratyush Yadav
• [PATCH v3 3/3] mtd: spi-nor: Favor the BFPT-parsed set_4byte_addr_mode method   Pratyush Yadav
• [PATCH V8] mtd: spi-nor: winbond: add support for W25Q512NW-IM   Pratyush Yadav
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Pratyush Yadav
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Pratyush Yadav
• [PATCH RFC v1 2/2] mtd: spi-nor: expose internal parameters via debugfs   Pratyush Yadav
• [PATCH] mtd: spi-nor: amend the rdsr dummy cycles documentation   Pratyush Yadav
• [PATCH] mtd: spi-nor: move spi_nor_write_ear() to winbond module   Pratyush Yadav
• [PATCH] mtd: spi-nor: move SECT_4K_PMC special handling   Pratyush Yadav
• [PATCH] mtd: spi-nor: Introduce templates for SPI NOR operations   Pratyush Yadav
• [PATCH v3 9/9] mtd: spi-nor: Introduce templates for SPI NOR operations   Pratyush Yadav
• [PATCH v4 03/11] mtd: spi-nor: core: Use auto-detection only once   Pratyush Yadav
• [PATCH v4 03/11] mtd: spi-nor: core: Use auto-detection only once   Pratyush Yadav
• [RESEND PATCH] mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()   Pratyush Yadav
• [RESEND PATCH] mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()   Pratyush Yadav
• [PATCH v4 00/11] mtd: spi-nor: Rework Octal DTR methods   Pratyush Yadav
• [PATCH v2 1/2] mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()   Pratyush Yadav
• [PATCH v2 2/2] mtd: spi-nor: expose internal parameters via debugfs   Pratyush Yadav
• [PATCH] mtd: spi-nor: move spi_nor_write_ear() to winbond module   Pratyush Yadav
• [PATCH v2] mtd: spi-nor: core: Skip setting erase types when SPI_NOR_NO_ERASE is set   Pratyush Yadav
• [PATCH] spi-nor: fix spi_nor_probe   Pratyush Yadav
• [PATCH v2] mtd: spi-nor: move spi_nor_write_ear() to winbond module   Pratyush Yadav
• [PATCH v4 0/2] refine the NFC clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang Yang
• [PATCH v4 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang Yang
• [PATCH 1/3] mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()   Yang Yingliang
• [PATCH 2/3] mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()   Yang Yingliang
• [PATCH 3/3] mtd: rawnand: tmio: check return value after calling platform_get_resource()   Yang Yingliang
• [PATCH v4 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem   Jae Hyun Yoo
• [f2fs-dev] [PATCH 26/27] block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD   Chao Yu
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Scott Zhang
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Scott Zhang
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Scott Zhang
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Scott Zhang
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Scott Zhang
• ubifs_decompress: cannot decompress 2293 bytes, compressor lzo, error -22   Scott Zhang
• [PATCH v2 0/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 2/2] mtd: parsers: add support for Sercomm partitions   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• [PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser   Mikhail Zhilkin
• No subject   We have an offer to invest in your country under a joint venture partnership please reply for more details
• [PATCH] mtd: nand: gpmi-nand: using pm_runtime_resume_and_get instead of pm_runtime_get_sync   cgel.zte at gmail.com
• [PATCH] UBIFS: simplify the return expression of run_gc()   cgel.zte at gmail.com
• [PATCH v10 0/4] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v10 1/4] mtd: spi-nor: sfdp: Use nor->info->addr_width as address width for SMPT parse   tkuw584924 at gmail.com
• [PATCH v10 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit   tkuw584924 at gmail.com
• [PATCH v10 3/4] mtd: spi-nor: spansion: Add local function to discover page size   tkuw584924 at gmail.com
• [PATCH v10 4/4] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   tkuw584924 at gmail.com
• [PATCH v11 0/3] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v11 1/3] mtd: spi-nor: spansion: Add support for volatile QE bit   tkuw584924 at gmail.com
• [PATCH v11 2/3] mtd: spi-nor: spansion: Add local function to discover page size   tkuw584924 at gmail.com
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   tkuw584924 at gmail.com
• [PATCH v12 0/6] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v12 1/6] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   tkuw584924 at gmail.com
• [PATCH v12 2/6] mtd: spi-nor: core: Call set_4byte_addr_mode() before spi_nor_quad_enalbe()   tkuw584924 at gmail.com
• [PATCH v12 3/6] mtd: spi-nor: spansion: Rename local macros   tkuw584924 at gmail.com
• [PATCH v12 4/6] mtd: spi-nor: spansion: Add support for volatile QE bit   tkuw584924 at gmail.com
• [PATCH v12 5/6] mtd: spi-nor: spansion: Add local function to discover page size   tkuw584924 at gmail.com
• [PATCH v12 6/6] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   tkuw584924 at gmail.com
• [PATCH v13 0/4] mtd: spi-nor: Add support for Infineon s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   tkuw584924 at gmail.com
• [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit   tkuw584924 at gmail.com
• [PATCH v13 3/4] mtd: spi-nor: spansion: Add local function to discover page size   tkuw584924 at gmail.com
• [PATCH v13 4/4] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   tkuw584924 at gmail.com
• [PATCH] mtd: spi-nor: issi: Add IS25WP512 device   niravkumar.l.rabara at intel.com
• [GIT PULL] mtd: Fixes for 5.18-rc5   pr-tracker-bot at kernel.org
• mtd: spi-nor: fatal issue during the mtd_erase() calls   mika.westerberg at linux.intel.com
• [PATCH v2 4/4] mtd: spi-nor: sfdp: Keep SFDP definitions private   Tudor.Ambarus at microchip.com
• [PATCH v2 4/4] mtd: spi-nor: sfdp: Keep SFDP definitions private   Tudor.Ambarus at microchip.com
• [PATCH v2 6/8] mtd: spi-nor: core: Add helpers to read/write any register   Tudor.Ambarus at microchip.com
• [PATCH v2] dt-bindings: mtd: jedec,spi-nor: remove unneeded properties   Tudor.Ambarus at microchip.com
• [PATCH v3 1/3] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Tudor.Ambarus at microchip.com
• [PATCH v3 3/3] mtd: spi-nor: Favor the BFPT-parsed set_4byte_addr_mode method   Tudor.Ambarus at microchip.com
• [PATCH v3 1/3] mtd: spi-nor: Parse BFPT to determine the 4-Byte Address Mode methods   Tudor.Ambarus at microchip.com
• [PATCH V8] mtd: spi-nor: winbond: add support for W25Q512NW-IM   Tudor.Ambarus at microchip.com
• [PATCH v11 1/3] mtd: spi-nor: spansion: Add support for volatile QE bit   Tudor.Ambarus at microchip.com
• [PATCH v11 2/3] mtd: spi-nor: spansion: Add local function to discover page size   Tudor.Ambarus at microchip.com
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Tudor.Ambarus at microchip.com
• [PATCH v11 1/3] mtd: spi-nor: spansion: Add support for volatile QE bit   Tudor.Ambarus at microchip.com
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Tudor.Ambarus at microchip.com
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Tudor.Ambarus at microchip.com
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Tudor.Ambarus at microchip.com
• [PATCH v3 6/9] mtd: spi-nor: core: Add helpers to read/write any register   Tudor.Ambarus at microchip.com
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH] mtd: spi-nor: Introduce templates for SPI NOR operations   Tudor.Ambarus at microchip.com
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH v11 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH v4 03/11] mtd: spi-nor: core: Use auto-detection only once   Tudor.Ambarus at microchip.com
• [PATCH v12 2/6] mtd: spi-nor: core: Call set_4byte_addr_mode() before spi_nor_quad_enalbe()   Tudor.Ambarus at microchip.com
• [PATCH v12 3/6] mtd: spi-nor: spansion: Rename local macros   Tudor.Ambarus at microchip.com
• [PATCH v12 6/6] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Tudor.Ambarus at microchip.com
• [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit   Tudor.Ambarus at microchip.com
• [PATCH v13 3/4] mtd: spi-nor: spansion: Add local function to discover page size   Tudor.Ambarus at microchip.com
• [PATCH v13 4/4] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups   Tudor.Ambarus at microchip.com
• [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit   Tudor.Ambarus at microchip.com
• [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit   Tudor.Ambarus at microchip.com
• [PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit   Tudor.Ambarus at microchip.com
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Tudor.Ambarus at microchip.com
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Tudor.Ambarus at microchip.com
• [PATCH v4 03/11] mtd: spi-nor: core: Use auto-detection only once   Tudor.Ambarus at microchip.com
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Tudor.Ambarus at microchip.com
• [PATCH] mtdblock: warn if opened on NAND   Tudor.Ambarus at microchip.com
• [PATCH] mtdblock: warn if opened on NAND   Tudor.Ambarus at microchip.com
• [PATCH v13 1/4] mtd: spi-nor: Retain nor->addr_width at 4BAIT parse   Tudor.Ambarus at microchip.com
• [RESEND PATCH] mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()   Tudor.Ambarus at microchip.com
• [PATCH v4 03/11] mtd: spi-nor: core: Use auto-detection only once   Tudor.Ambarus at microchip.com
• [RESEND PATCH] mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()   Tudor.Ambarus at microchip.com
• [RESEND PATCH] mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()   Tudor.Ambarus at microchip.com
• [PATCH] UBIFS: simplify the return expression of run_gc()   Tudor.Ambarus at microchip.com
• [PATCH resend 2/4] spi: add driver for MTK SPI NAND Flash Interface   kernel test robot
• [PATCH resend 1/4] mtd: nand: make mtk_ecc.c a separated module   kernel test robot
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   kernel test robot
• [PATCH v4 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   kernel test robot
• [PATCH v2 3/4] mtd: phram: Allow probing via reserved-memory   kernel test robot
• [linux-next:master] BUILD REGRESSION 109f6d10ec17302c4666f7df3dfa0e31d8589d41   kernel test robot
• [linux-next:master] BUILD REGRESSION 2e9a9857569ec27e64d2ddd01294bbe3c736acb1   kernel test robot
• [linux-next:master] BUILD REGRESSION ff511c1c68a5a35ab0b3efb3c306fd80b10d74be   kernel test robot
• [PATCH] mtd: nand: separate ecc-mxic from nandcore   kernel test robot
• [PATCH] mtd: rawnand: Fix return value check of wait_for_completion_timeout   kernel test robot
• [PATCH v3 4/4] mtd: phram: Allow cached mappings   kernel test robot
• [linux-next:master] BUILD REGRESSION a67ba3cf9551f8c92d5ec9d7eae1aadbb9127b57   kernel test robot
• UBIFS: is the corrupted file in a finite state when power cut ?   袁建鹏

Last message date: Sat Apr 30 22:44:40 PDT 2022
Archived on: Sat Apr 30 22:44:53 PDT 2022

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...