[PATCH 2/2] dt-bindings: mtd: qcom_nandc: document qcom,boot_pages binding

[Krzysztof Kozlowski]

On 29/04/2022 23:16, Ansuel Smith wrote:
> Document new qcom,boot_pages binding used to apply special
> read/write configuration to boot pages.
> 
> QCOM apply a special configuration where spare data is not protected
> by ECC for some special pages (used for boot partition). Add
> Documentation on how to declare these special pages.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth at gmail.com>
> ---
>  .../devicetree/bindings/mtd/qcom,nandc.yaml         | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> index 84ad7ff30121..ef243109689d 100644
> --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> @@ -78,6 +78,17 @@ allOf:
>              Must contain the ADM data type CRCI block instance number
>              specified for the NAND controller on the given platform
>  
> +        qcom,boot_pages:

No underscores in property names.

> +          $ref: /schemas/types.yaml#/definitions/uint32-array
> +          description:
> +            Some special page used by boot partition have spare data
> +            not protected by ECC. Use this to declare these special page
> +            by defining first the offset and then the size.
> +
> +            It's in the form of <offset1 size1 offset2 size2 offset3 ...>

Then it look like uint32-matrix.

> +
> +            Refer to the ipq8064 example on how to use this special binding.

Property does not look valid for other variants, so it should be made
false for them (in allOf:if:then).

> +
>    - if:
>        properties:
>          compatible:
> @@ -135,6 +146,8 @@ examples:
>          nand-ecc-strength = <4>;
>          nand-bus-width = <8>;
>  
> +        qcom,boot_pages = <0x0 0x58a0000>;
> +
>          partitions {
>            compatible = "fixed-partitions";
>            #address-cells = <1>;


Best regards,
Krzysztof