[PATCH v13 2/4] mtd: spi-nor: spansion: Add support for volatile QE bit

[tkuw584924 at gmail.com]

From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>

Some of Infineon chips support volatile version of configuration registers
and it is recommended to update volatile registers in the field application
due to a risk of the non-volatile registers corruption by power interrupt.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
Changes in v13:
  - Use 3-byte address width

Changes in v12:
  - Rebase on top of Tudor's series
    https://patchwork.ozlabs.org/project/linux-mtd/list/?series=295933
  - Use macro directly instead of local variable
  - Use nor->reg_proto instead of SNOR_PROTO_1_1_1
    
Changes in v11:
  - Rebase on top of Tudor's series
    https://patchwork.ozlabs.org/project/linux-mtd/list/?series=294490
  
Changes in v10:
  - Remove dependencies on other series
  
Changes in v9:
  - Rename function per mwalle's series
  
Changes in v8:
  - Use spi_nor_read/write_reg() functions
  - Use nor->bouncebuf instead of a variable on stack
  
Changes in v7:
  - Add missing macro definitions in v6
  
Changes in v6:
  - Remove multi die package support

Changes in v5:
  - No change
  
Changes in v4:
  - No change
  
Changes in v3:
  - Add multi-die package parts support

 drivers/mtd/spi-nor/spansion.c | 59 ++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 43cd6cd92537..65ae3ade0b95 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -14,6 +14,8 @@
 #define SPINOR_OP_CLSR		0x30	/* Clear status register 1 */
 #define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
 #define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */
+#define SPINOR_REG_CYPRESS_CFR1V		0x00800002
+#define SPINOR_REG_CYPRESS_CFR1V_QUAD_EN	BIT(1)	/* Quad Enable */
 #define SPINOR_REG_CYPRESS_CFR2V		0x00800003
 #define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24	0xb
 #define SPINOR_REG_CYPRESS_CFR3V		0x00800004
@@ -113,6 +115,63 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 	return 0;
 }
 
+/**
+ * cypress_nor_quad_enable_volatile() - enable Quad I/O mode in volatile
+ *                                      register.
+ * @nor:	pointer to a 'struct spi_nor'
+ *
+ * It is recommended to update volatile registers in the field application due
+ * to a risk of the non-volatile registers corruption by power interrupt. This
+ * function sets Quad Enable bit in CFR1 volatile. If users set the Quad Enable
+ * bit in the CFR1 non-volatile in advance (typically by a Flash programmer
+ * before mounting Flash on PCB), the Quad Enable bit in the CFR1 volatile is
+ * also set during Flash power-up.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
+{
+	struct spi_mem_op op;
+	u8 cfr1v_written;
+	int ret;
+
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR1V,
+					  nor->bouncebuf);
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR1V_QUAD_EN)
+		return 0;
+
+	/* Update the Quad Enable bit. */
+	nor->bouncebuf[0] |= SPINOR_REG_CYPRESS_CFR1V_QUAD_EN;
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_WR_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR1V, 1,
+					  nor->bouncebuf);
+	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	cfr1v_written = nor->bouncebuf[0];
+
+	/* Read back and check it. */
+	op = (struct spi_mem_op)
+		CYPRESS_NOR_RD_ANY_REG_OP(3, SPINOR_REG_CYPRESS_CFR1V,
+					  nor->bouncebuf);
+	ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
+	if (ret)
+		return ret;
+
+	if (nor->bouncebuf[0] != cfr1v_written) {
+		dev_err(nor->dev, "CFR1: Read back test failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /**
  * cypress_nor_octal_dtr_enable() - Enable octal DTR on Cypress flashes.
  * @nor:		pointer to a 'struct spi_nor'
-- 
2.25.1