[PATCH v2 1/2] dt-bindings: mtd: partitions: Add binding for Sercomm parser

[Mikhail Zhilkin]

Add YAML binding for Sercomm partition parser.

Signed-off-by: Mikhail Zhilkin <csharper2005 at gmail.com>
---
 .../mtd/partitions/sercomm,sc-partitions.yaml | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml

diff --git a/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml
new file mode 100644
index 000000000000..07ea5596200c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/sercomm,sc-partitions.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/sercomm,sc-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sercomm Partitions
+
+description: |
+  Sercomm is one of hardware manufacturers providing SoCs used in home routers.
+  The Sercomm partition map table contains information about non-standard
+  partition offsets and sizes (depending on the bad blocks presence and their
+  locations). Partition map is used by many Sercomm-based Ralink devices
+  (e.g. Beeline, Netgear).
+
+maintainers:
+  - Mikhail Zhilkin <csharper2005 at gmail.com>
+
+properties:
+  compatible:
+    const: sercomm,sc-partitions
+
+  scpart-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Partition id in Sercomm partition map
+
+required:
+  - compatible
+  - scpart-id
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions
+        compatible = "sercomm,sc-partitions", "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition at 0 {
+            label = "u-boot";
+            reg = <0x0 0x100000>;
+            scpart-id = <0>;
+            read-only;
+        };
+
+        partition at 100000 {
+            label = "dynamic partition map";
+            reg = <0x100000 0x100000>;
+            scpart-id = <1>;
+        };
+
+        factory: partition at 200000 {
+            label = "Factory";
+            reg = <0x200000 0x100000>;
+            scpart-id = <2>;
+            read-only;
+
+            compatible = "nvmem-cells";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            macaddr_factory_21000: macaddr at 21000 {
+                reg = <0x21000 0x6>;
+            };
+        };
+
+        /* ... */
+
+    };
-- 
2.25.1