January 2022 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Jan 1 05:30:12 PST 2022
Ending: Mon Jan 31 23:47:47 PST 2022
Messages: 395

• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Yu Tu
• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Martin Blumenstingl
• [RESEND] Amlogic DPCM audio card(s) speaker placement issue   Jerome Brunet
• [RESEND] Amlogic DPCM audio card(s) speaker placement issue   Jaroslav Kysela
• [PATCH v2 1/1] dt-bindings: display: meson-vpu: Add missing amlogic,canvas property   Neil Armstrong
• [PATCH 2/2] drm/meson: Fix error handling when afbcd.ops->init fails   Neil Armstrong
• [PATCH 1/2] drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops   Neil Armstrong
• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Jerome Brunet
• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Jerome Brunet
• [PATCH 0/3] ARM: dts: meson: fix UART device-tree schema validation   Neil Armstrong
• [PATCH V3 1/6] tty: serial: meson: Drop the legacy compatible strings and clock code   Neil Armstrong
• [GIT PULL] amlogic fixes for v5.17-rc   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1: add spdifin spdifout nodes   Neil Armstrong
• [PATCH V3 1/6] tty: serial: meson: Drop the legacy compatible strings and clock code   Greg Kroah-Hartman
• [RFC PATCH 6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR   Neil Armstrong
• [RFC PATCH 6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR   Christian Hewitt
• [PATCH V3 1/6] tty: serial: meson: Drop the legacy compatible strings and clock code   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1: add spdifin spdifout nodes   Jerome Brunet
• [PATCH 0/3] meson-g12: add pwm and uart pin muxing options   Gary Bisson
• [PATCH 1/3] pinctrl: meson-g12a: add more pwm_f options   Gary Bisson
• [PATCH 2/3] arm64: dts: meson-g12-common: add more pwm_f options   Gary Bisson
• [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing   Gary Bisson
• [PATCH V3 1/6] tty: serial: meson: Drop the legacy compatible strings and clock code   Greg Kroah-Hartman
• [PATCH V3 1/6] tty: serial: meson: Drop the legacy compatible strings and clock code   Neil Armstrong
• [PATCH v2 0/9] arm64: dts: meson: add support for aac2xx devices   Christian Hewitt
• [PATCH v2 1/9] arm64: dts: meson: add common SM1 ac2xx dtsi   Christian Hewitt
• [PATCH v2 2/9] dt-bindings: arm: amlogic: add X96-AIR bindings   Christian Hewitt
• [PATCH v2 3/9] arm64: dts: meson: add initial device-trees for X96-AIR   Christian Hewitt
• [PATCH v2 4/9] dt-bindings: vendor-prefixes: add cyx prefix   Christian Hewitt
• [PATCH v2 5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings   Christian Hewitt
• [PATCH v2 6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR   Christian Hewitt
• [PATCH v2 7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix   Christian Hewitt
• [PATCH v2 8/9] dt-bindings: arm: amlogic: add H96-Max bindings   Christian Hewitt
• [PATCH v2 9/9] arm64: dts: meson: add initial device-tree for H96-Max   Christian Hewitt
• [PATCH v2 1/9] arm64: dts: meson: add common SM1 ac2xx dtsi   Neil Armstrong
• [PATCH v2 3/9] arm64: dts: meson: add initial device-trees for X96-AIR   Neil Armstrong
• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Yu Tu
• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Yu Tu
• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Jerome Brunet
• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Yu Tu
• [PATCH V3 4/6] tty: serial: meson: The UART baud rate calculation is described using the common clock code. Also added S4 chip uart Compatible.   Yu Tu
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Liang Yang
• [PATCH] dt-bindings: nand: meson: fix controller clock   Liang Yang
• [PATCH V3] arm64: dts: add support for S4 based Amlogic AQ222   Xianwei Zhao
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Miquel Raynal
• [PATCH] dt-bindings: nand: meson: fix controller clock   Miquel Raynal
• [PATCH] dt-bindings: nand: meson: fix controller clock   Miquel Raynal
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Jerome Brunet
• [PATCH] dt-bindings: nand: meson: fix controller clock   Neil Armstrong
• [PATCH] dt-bindings: nand: meson: fix controller clock   Jerome Brunet
• [PATCH V3] arm64: dts: add support for S4 based Amlogic AQ222   Jerome Brunet
• [PATCH] mmc: meson: Fix usage of meson_mmc_post_req()   Rong Chen
• [PATCH V3] arm64: dts: add support for S4 based Amlogic AQ222   xianwei.zhao
• [PATCH V4] arm64: dts: add support for S4 based Amlogic AQ222   Xianwei Zhao
• [PATCH v5 0/3] usb: meson: fix shared reset control use   Kevin Hilman
• [PATCH 0/3] reset: meson-s4: add reset driver   Zelong Dong
• [PATCH 1/3] dt-bindings: reset: Add compatible for Meson-S4 Reset Controller   Zelong Dong
• [PATCH 2/3] dt-bindings: reset: add bindings for the Meson-S4 SoC Reset Controller   Zelong Dong
• [PATCH 3/3] reset: reset-meson: add support for the Meson-S4 SoC Reset Controller   Zelong Dong
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Liang Yang
• [PATCH] dt-bindings: nand: meson: fix controller clock   Liang Yang
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Liang Yang
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Liang Yang
• [PATCH] spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe   Miaoqian Lin
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Jerome Brunet
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Neil Armstrong
• [PATCH] spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe   Mark Brown
• [PATCH 0/6] drm/meson: add support for MIPI DSI Display   Neil Armstrong
• [PATCH 1/6] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Neil Armstrong
• [PATCH 2/6] dt-bindings: display: meson-vpu: add third DPI output port   Neil Armstrong
• [PATCH 3/6] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output   Neil Armstrong
• [PATCH 4/6] drm/meson: vclk: add DSI clock config   Neil Armstrong
• [PATCH 5/6] drm/meson: add DSI encoder   Neil Armstrong
• [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver   Neil Armstrong
• [PATCH v3 0/2] phy: amlogic: Add support for the G12A Analog MIPI D-PHY   Neil Armstrong
• [PATCH v3 1/2] dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings   Neil Armstrong
• [PATCH v3 2/2] phy: amlogic: Add G12A Analog MIPI D-PHY driver   Neil Armstrong
• [PATCH 1/3] dt-bindings: reset: Add compatible for Meson-S4 Reset Controller   Martin Blumenstingl
• [PATCH 2/3] dt-bindings: reset: add bindings for the Meson-S4 SoC Reset Controller   Martin Blumenstingl
• [PATCH 3/3] reset: reset-meson: add support for the Meson-S4 SoC Reset Controller   Martin Blumenstingl
• [PATCH v3 2/2] phy: amlogic: Add G12A Analog MIPI D-PHY driver   Martin Blumenstingl
• [PATCH v3 1/2] dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings   Martin Blumenstingl
• [PATCH 2/6] dt-bindings: display: meson-vpu: add third DPI output port   Martin Blumenstingl
• [PATCH 3/6] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output   Martin Blumenstingl
• [PATCH 5/6] drm/meson: add DSI encoder   Martin Blumenstingl
• [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver   Martin Blumenstingl
• [PATCH 0/4] irqchip/meson-gpio: Add support for Meson-S4 SoC   Qianggui Song
• [PATCH 1/4] dt-bindings: interrupt-controller: New binding for Meson-S4 SoCs   Qianggui Song
• [PATCH 2/4] irqchip/meson-gpio: support more than 8 channels gpio irq line   Qianggui Song
• [PATCH 3/4] irqchip/meson-gpio: add select trigger type callback   Qianggui Song
• [PATCH 4/4] irqchip/meson-gpio: Add support for meson s4 SoCs   Qianggui Song
• [PATCH 2/4] irqchip/meson-gpio: support more than 8 channels gpio irq line   Marc Zyngier
• [PATCH 3/4] irqchip/meson-gpio: add select trigger type callback   Marc Zyngier
• [PATCH 4/4] irqchip/meson-gpio: Add support for meson s4 SoCs   Marc Zyngier
• [GIT PULL] amlogic fixes for v5.17-rc   Olof Johansson
• [PATCH 1/4] dt-bindings: interrupt-controller: New binding for Meson-S4 SoCs   Christian Hewitt
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Liang Yang
• [PATCH] mtd: rawnand: meson: fix the clock after discarding sd_emmc_c_clkc   Liang Yang
• [PATCH 1/2] dt-bindings: serial: meson: Drop compatible = amlogic, meson-gx-uart.   Yu Tu
• [PATCH] tty: serial: meson: Change request_irq to devm_request_irq and move devm_request_irq to meson_uart_probe()   Yu Tu
• [PATCH] tty: serial: meson: Make the bit24 and bit [26, 27] of the UART_REG5 register writable   Yu Tu
• [PATCH] tty: serial: meson: meson_uart_shutdown omit clear AML_UART_TX_EN bit   Yu Tu
• [PATCH] tty: serial: meson: Request the register region in meson_uart_probe()   Yu Tu
• [PATCH 1/2] tty: serial: meson: The UART baud rate calculation is described using the common clock code.   Yu Tu
• [PATCH 1/2] dt-bindings: serial: meson: Drop compatible = amlogic,meson-gx-uart.   Yu Tu
• [PATCH] tty: serial: meson: Change request_irq to devm_request_irq and move devm_request_irq to meson_uart_probe()   Yu Tu
• [PATCH] tty: serial: meson: Make the bit24 and bit [26, 27] of the UART_REG5 register writable   Yu Tu
• [PATCH] tty: serial: meson: meson_uart_shutdown omit clear AML_UART_TX_EN bit   Yu Tu
• [PATCH] tty: serial: meson: Request the register region in meson_uart_probe()   Yu Tu
• [PATCH 1/2] tty: serial: meson: The UART baud rate calculation is described using the common clock code.   Yu Tu
• [PATCH V4 0/5] the UART driver compatible with   Yu Tu
• [PATCH V4 1/5] dt-bindings: serial: meson: Drop   Yu Tu
• [PATCH V4 2/5] tty: serial: meson: Request the register   Yu Tu
• [PATCH V4 3/5] tty: serial: meson: The UART baud rate   Yu Tu
• [PATCH V4 4/5] tty: serial: meson: Make the bit24 and   Yu Tu
• [PATCH V4 5/5] tty: serial: meson: Added S4 SOC compatibility.   Yu Tu
• [GIT PULL] amlogic fixes for v5.17-rc   Neil Armstrong
• [PATCH v3 1/2] dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings   Neil Armstrong
• [PATCH V4 0/5] the UART driver compatible with   Neil Armstrong
• [PATCH V4 0/5] the UART driver compatible with   Yu Tu
• [GIT PULL] amlogic fixes for v5.17-rc v2   Neil Armstrong
• [PATCH V4 0/5] the UART driver compatible with   Neil Armstrong
• [PATCH 3/6] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output   Neil Armstrong
• [PATCH 5/6] drm/meson: add DSI encoder   Neil Armstrong
• [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver   Neil Armstrong
• [PATCH V5 0/5] The UART driver compatible with   Yu Tu
• [PATCH V5 1/5] dt-bindings: serial: meson: Drop legacy compatible.   Yu Tu
• [PATCH V5 2/5] tty: serial: meson: Move request the register region.   Yu Tu
• [PATCH V5 3/5] tty: serial: meson: Using the common clock code describe.   Yu Tu
• [PATCH V5 4/5] tty: serial: meson: Make some bit of the REG5 register writable.   Yu Tu
• [PATCH V5 5/5] tty: serial: meson: Added S4 SOC compatibility.   Yu Tu
• [PATCH V5 2/5] tty: serial: meson: Move request the register region.   Jiri Slaby
• [PATCH V5 3/5] tty: serial: meson: Using the common clock code describe.   Jiri Slaby
• [PATCH 2/4] irqchip/meson-gpio: support more than 8 channels gpio irq line   qianggui.song
• [PATCH 3/4] irqchip/meson-gpio: add select trigger type callback   qianggui.song
• [PATCH 4/4] irqchip/meson-gpio: Add support for meson s4 SoCs   qianggui.song
• [PATCH 1/4] dt-bindings: interrupt-controller: New binding for Meson-S4 SoCs   qianggui.song
• [PATCH v3 2/2] phy: amlogic: Add G12A Analog MIPI D-PHY driver   Neil Armstrong
• [PATCH V4 3/5] tty: serial: meson: The UART baud rate   Jerome Brunet
• [PATCH 4/4] irqchip/meson-gpio: Add support for meson s4 SoCs   Marc Zyngier
• [PATCH V5 1/5] dt-bindings: serial: meson: Drop legacy compatible.   Rob Herring
• [PATCH 2/3] dt-bindings: reset: add bindings for the Meson-S4 SoC Reset Controller   Rob Herring
• ODROID-C1/-C2 USB Detection only triggered by some devices dwc2   Martin Blumenstingl
• [PATCH v3 1/2] dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings   Martin Blumenstingl
• [PATCH V5 2/5] tty: serial: meson: Move request the register region.   Yu Tu
• [PATCH V5 3/5] tty: serial: meson: Using the common clock code describe.   Yu Tu
• [PATCH V4 3/5] tty: serial: meson: The UART baud rate   Yu Tu
• [PATCH V5 1/5] dt-bindings: serial: meson: Drop legacy compatible.   Yu Tu
• [PATCH v3] media: meson: vdec: Fix a NULL pointer dereference in amvdec_add_ts()   Hans Verkuil
• [PATCH v2] media: meson: vdec: potential dereference of null pointer   Hans Verkuil
• [PATCH v6 0/3] phy: amlogic: fix shared reset control use   Amjad Ouled-Ameur
• [PATCH v6 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use   Amjad Ouled-Ameur
• [PATCH v6 2/3] phy: amlogic: meson8b-usb2: Use dev_err_probe()   Amjad Ouled-Ameur
• [PATCH v6 3/3] phy: amlogic: meson8b-usb2: fix shared reset control use   Amjad Ouled-Ameur
• [PATCH v2 1/2] drm/mipi-dbi: Remove dependency on GEM CMA helper library   Noralf Trønnes
• [PATCH v2 2/9] dt-bindings: arm: amlogic: add X96-AIR bindings   Rob Herring
• [PATCH v2 5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings   Rob Herring
• [PATCH 1/3] dt-bindings: reset: Add compatible for Meson-S4 Reset Controller   Rob Herring
• [PATCH 1/6] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Rob Herring
• [PATCH 2/6] dt-bindings: display: meson-vpu: add third DPI output port   Rob Herring
• [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices   Christian Hewitt
• [PATCH v3 1/9] arm64: dts: meson: add common SM1 ac2xx dtsi   Christian Hewitt
• [PATCH v3 2/9] dt-bindings: arm: amlogic: add X96-AIR bindings   Christian Hewitt
• [PATCH v3 3/9] arm64: dts: meson: add initial device-trees for X96-AIR   Christian Hewitt
• [PATCH v3 4/9] dt-bindings: vendor-prefixes: add cyx prefix   Christian Hewitt
• [PATCH v3 5/9] dt-bindings: arm: amlogic: add A95XF3-AIR bindings   Christian Hewitt
• [PATCH v3 6/9] arm64: dts: meson: add initial device-trees for A95XF3-AIR   Christian Hewitt
• [PATCH v3 7/9] dt-bindings: vendor-prefixes: add haochuangyi prefix   Christian Hewitt
• [PATCH v3 8/9] dt-bindings: arm: amlogic: add H96-Max bindings   Christian Hewitt
• [PATCH v3 9/9] arm64: dts: meson: add initial device-tree for H96-Max   Christian Hewitt
• [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver   Jagan Teki
• [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver   Neil Armstrong
• [PATCH v3 0/9] arm64: dts: meson: add support for ac2xx devices   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1: add spdifin spdifout nodes   Neil Armstrong
• [PATCH V3] dt-bindings: arm: amlogic: add S4 based AQ222 bindings   Neil Armstrong
• [PATCH 1/3] pinctrl: meson-g12a: add more pwm_f options   Neil Armstrong
• [PATCH 2/3] arm64: dts: meson-g12-common: add more pwm_f options   Neil Armstrong
• [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing   Neil Armstrong
• [PATCH V2 2/2] soc: s4: Add support for power domains controller   Neil Armstrong
• [PATCH V4] arm64: dts: add support for S4 based Amlogic AQ222   Neil Armstrong
• [PATCH v3] media: meson: vdec: Fix a NULL pointer dereference in amvdec_add_ts()   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1: add spdifin spdifout nodes   Neil Armstrong
• [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing   Gary Bisson
• [PATCH 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing   Neil Armstrong
• [PATCH V4 3/5] tty: serial: meson: The UART baud rate   kernel test robot
• [PATCH V4 3/5] tty: serial: meson: The UART baud rate   kernel test robot
• [PATCH v2 0/3] meson-g12: add pwm and uart pin muxing options   Gary Bisson
• [PATCH v2 1/3] pinctrl: meson-g12a: add more pwm_f options   Gary Bisson
• [PATCH v2 2/3] arm64: dts: meson-g12-common: add more pwm_f options   Gary Bisson
• [PATCH v2 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing   Gary Bisson
• [PATCH v4 0/3] pinctrl: meson-s4: add pinctrl driver   Qianggui Song
• [PATCH v4 1/3] dt-bindings: pinctrl: meson: Add compatible for S4   Qianggui Song
• [PATCH v4 2/3] dt-bindings: gpio: Add a header file for Amlogic Meson S4   Qianggui Song
• [PATCH v4 3/3] pinctrl: meson: add pinctrl driver support for Meson-S4 Soc   Qianggui Song
• [PATCH 0/3] arm64: dts: meson: minor P212/VIM1 fixups   Christian Hewitt
• [PATCH 1/3] arm64: dts: meson: add Broadcom WiFi to P212 dtsi   Christian Hewitt
• [PATCH 2/3] arm64: dts: meson: move pwm_ef node in P212 dtsi   Christian Hewitt
• [PATCH 3/3] arm64: dts: meson: remove Broadcom WiFi/BT nodes from Khadas VIM1   Christian Hewitt
• [PATCH] arm64: dts: meson: add audio playback to P212   Christian Hewitt
• [PATCH] media: meson: vdec: potential dereference of null pointer   Jiasheng Jiang
• [PATCH v3] media: meson: vdec: potential dereference of null pointer   Jiasheng Jiang
• [PATCH v3] media: meson: vdec: Fix a NULL pointer dereference in amvdec_add_ts()   Jiasheng Jiang
• [PATCH V5 2/5] tty: serial: meson: Move request the register region.   Jiri Slaby
• [PATCH v3] media: meson: vdec: potential dereference of null pointer   Neil Armstrong
• [PATCH v2 3/3] arm64: dts: meson-g12-common: add uart_ao_b pins muxing   Neil Armstrong
• [PATCH v2 0/3] meson-g12: add pwm and uart pin muxing options   Neil Armstrong
• [PATCH] arm64: dts: amlogic: meson-s4-aq222: fix waring for leading 0s   Anders Roxell
• [PATCH] arm64: dts: amlogic: meson-s4-aq222: fix waring for leading 0s   Neil Armstrong
• [PATCH v9 0/4] clk: meson: add a sub EMMC clock controller support   Liang Yang
• [PATCH v9 1/4] clk: meson: add one based divider support for sclk   Liang Yang
• [PATCH v9 2/4] clk: meson: add emmc sub clock phase delay driver   Liang Yang
• [PATCH v9 3/4] clk: meson: add DT documentation for emmc clock controller   Liang Yang
• [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver   Liang Yang
• HDMI CEC on ODROID-N2+   Stefan Agner
• HDMI CEC on ODROID-N2+   Neil Armstrong
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Biju Das
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Fabio Estevam
• [PATCH v9 1/4] clk: meson: add one based divider support for sclk   Stephen Boyd
• [PATCH v9 2/4] clk: meson: add emmc sub clock phase delay driver   Stephen Boyd
• [PATCH v9 3/4] clk: meson: add DT documentation for emmc clock controller   Stephen Boyd
• [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver   Stephen Boyd
• [PATCH v9 3/4] clk: meson: add DT documentation for emmc clock controller   Liang Yang
• [PATCH v9 1/4] clk: meson: add one based divider support for sclk   Liang Yang
• [PATCH v9 2/4] clk: meson: add emmc sub clock phase delay driver   Liang Yang
• [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver   Liang Yang
• [PATCH] pwm: meson: external clock configuration for s4   Jiayi Zhou
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Neil Armstrong
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Biju Das
• [PATCH v2] dt-bindings: pwm: Update bindings for the Meson-S4   jiayi.zhou at amlogic.com
• [PATCH v2] pwm: meson: external clock configuration for s4   Jiayi.Zhou at amlogic.com
• [PATCH v2] pwm: meson: external clock configuration for s4   Neil Armstrong
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Neil Armstrong
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Biju Das
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Neil Armstrong
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Biju Das
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Neil Armstrong
• [PATCH v2] pwm: meson: external clock configuration for s4   Jerome Brunet
• [PATCH v9 3/4] clk: meson: add DT documentation for emmc clock controller   Stephen Boyd
• [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver   Stephen Boyd
• [PATCH v9 3/4] clk: meson: add DT documentation for emmc clock controller   Martin Blumenstingl
• [PATCH 1/2] arm64: dts: meson-axg: add missing reset-names property   Alexander Stein
• [PATCH 2/2] ASoC: meson: axg-fifo: convert Amlogic FIFO controller to yaml   Alexander Stein
• (EXT) HDMI CEC on ODROID-N2+   Alexander Stein
• (EXT) HDMI CEC on ODROID-N2+   Stefan Agner
• (EXT) HDMI CEC on ODROID-N2+   Stefan Agner
• [PATCH 1/2] arm64: dts: meson-axg: add missing reset-names property   Jerome Brunet
• [PATCH 2/2] ASoC: meson: axg-fifo: convert Amlogic FIFO controller to yaml   Jerome Brunet
• [PATCH 2/2] ASoC: meson: axg-fifo: convert Amlogic FIFO controller to yaml   Rob Herring
• [PATCH 2/2] ASoC: meson: axg-fifo: convert Amlogic FIFO controller to yaml   Rob Herring
• [PATCH 1/3] pinctrl: meson-g12a: add more pwm_f options   Linus Walleij
• [PATCH] nvmem: meson-mx-efuse: check the return value of devm_kstrdup()   xkernel.wang at foxmail.com
• [PATCH 1/2] arm64: dts: meson-axg: add missing reset-names property   Alexander Stein
• (EXT) HDMI CEC on ODROID-N2+   Alexander Stein
• (EXT) HDMI CEC on ODROID-N2+   Stefan Agner
• [PATCH 1/2] arm64: dts: meson-axg: add missing reset-names property   Jerome Brunet
• [PATCH] nvmem: meson-mx-efuse: check the return value of devm_kstrdup()   Martin Blumenstingl
• [PATCH v9 3/4] clk: meson: add DT documentation for emmc clock controller   Liang Yang
• [PATCH v2] nvmem: meson-mx-efuse: replace unnecessary devm_kstrdup()   xkernel.wang at foxmail.com
• [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver   Liang Yang
• [PATCH v9 3/4] clk: meson: add DT documentation for emmc clock controller   Liang Yang
• [PATCH V4 3/5] tty: serial: meson: The UART baud rate   Jerome Brunet
• [PATCH V4 3/5] tty: serial: meson: The UART baud rate   Yu Tu
• [PATCH v2 0/3] meson-g12: add pwm and uart pin muxing options   Neil Armstrong
• [PATCH 1/2] arm64: dts: meson-axg: add missing reset-names property   Neil Armstrong
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Neil Armstrong
• [PATCH 1/2] arm64: dts: meson-axg: add missing reset-names property   Jerome Brunet
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Biju Das
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Neil Armstrong
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Neil Armstrong
• dw_hdmi is showing wrong colour after commit 7cd70656d1285b79("drm/bridge: display-connector: implement bus fmts callbacks")   Neil Armstrong
• [PATCH 3/3] arm64: dts: meson: remove Broadcom WiFi/BT nodes from Khadas VIM1   Neil Armstrong
• [PATCH 2/3] arm64: dts: meson: move pwm_ef node in P212 dtsi   Neil Armstrong
• [PATCH 1/3] arm64: dts: meson: add Broadcom WiFi to P212 dtsi   Neil Armstrong
• [PATCH] arm64: dts: meson: add audio playback to P212   Neil Armstrong
• [PATCH AUTOSEL 5.16 12/52] clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB   Sasha Levin
• [PATCH AUTOSEL 5.15 11/44] clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB   Sasha Levin
• [PATCH AUTOSEL 5.10 11/34] clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB   Sasha Levin
• [PATCH AUTOSEL 5.4 10/21] clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB   Sasha Levin
• [PATCH AUTOSEL 5.16 029/217] usb: dwc3: meson-g12a: fix shared reset control use   Sasha Levin
• [PATCH AUTOSEL 5.15 023/188] usb: dwc3: meson-g12a: fix shared reset control use   Sasha Levin
• [PATCH] phy: dphy: Correct clk_pre parameter   Liu Ying
• [PATCH V6 0/5] Use CCF to describe the UART baud rate clock   Yu Tu
• [PATCH V6 1/5] tty: serial: meson: Move request the register region to probe   Yu Tu
• [PATCH V6 2/5] tty: serial: meson: Use devm_ioremap_resource to get register mapped memory   Yu Tu
• [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame   Yu Tu
• [PATCH V6 4/5] tty: serial: meson: Make some bit of the REG5 register writable   Yu Tu
• [PATCH V6 5/5] tty: serial: meson: Added S4 SOC compatibility   Yu Tu
• [PATCH] phy: dphy: Correct clk_pre parameter   Andrzej Hajda
• [PATCH V6 1/5] tty: serial: meson: Move request the register region to probe   Jiri Slaby
• [PATCH V6 2/5] tty: serial: meson: Use devm_ioremap_resource to get register mapped memory   Jiri Slaby
• [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame   Jiri Slaby
• [PATCH] phy: dphy: Correct clk_pre parameter   Liu Ying
• [PATCH] phy: dphy: Correct clk_pre parameter   Andrzej Hajda
• [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver   Stephen Boyd
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Liu Ying
• [PATCH v9 4/4] clk: meson: add sub MMC clock controller driver   Liang Yang
• [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame   Yu Tu
• [PATCH v2 0/4] irqchip/meson-gpio: Add support for Meson-S4 SoC   Qianggui Song
• [PATCH v2 1/4] dt-bindings: interrupt-controller: New binding for Meson-S4 SoCs   Qianggui Song
• [PATCH v2 2/4] irqchip/meson-gpio: support more than 8 channels gpio irq line   Qianggui Song
• [PATCH v2 3/4] irqchip/meson-gpio: add select trigger type callback   Qianggui Song
• [PATCH v2 4/4] irqchip/meson-gpio: Add support for meson s4 SoCs   Qianggui Song
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Andrzej Hajda
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Neil Armstrong
• [PATCH v2 3/4] irqchip/meson-gpio: add select trigger type callback   Neil Armstrong
• [PATCH v2 2/4] irqchip/meson-gpio: support more than 8 channels gpio irq line   Neil Armstrong
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Neil Armstrong
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Liu Ying
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Neil Armstrong
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Neil Armstrong
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Guido Günther
• [PATCH v2 2/4] irqchip/meson-gpio: support more than 8 channels gpio irq line   Marc Zyngier
• [PATCH V6 0/5] Use CCF to describe the UART baud rate clock   Kevin Hilman
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Liu Ying
• [PATCH v2 0/6] drm/meson: add support for MIPI DSI Display   Neil Armstrong
• [PATCH v2 1/6] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Neil Armstrong
• [PATCH v2 2/6] dt-bindings: display: meson-vpu: add third DPI output port   Neil Armstrong
• [PATCH v2 3/6] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output   Neil Armstrong
• [PATCH v2 4/6] drm/meson: vclk: add DSI clock config   Neil Armstrong
• [PATCH v2 5/6] drm/meson: add DSI encoder   Neil Armstrong
• [PATCH v2 6/6] drm/meson: add support for MIPI-DSI transceiver   Neil Armstrong
• [PATCH V6 0/5] Use CCF to describe the UART baud rate clock   Yu Tu
• [PATCH V2 2/2] soc: s4: Add support for power domains controller   Neil Armstrong
• [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver   Jagan Teki
• [PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver   Neil Armstrong
• [PATCH v2 5/6] drm/meson: add DSI encoder   Jagan Teki
• [PATCH v2 6/6] drm/meson: add support for MIPI-DSI transceiver   Jagan Teki
• [PATCH v2 3/6] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output   Neil Armstrong
• [PATCH v2 6/6] drm/meson: add support for MIPI-DSI transceiver   Neil Armstrong
• [PATCH v2 6/6] drm/meson: add support for MIPI-DSI transceiver   Jagan Teki
• [PATCH v2 6/6] drm/meson: add support for MIPI-DSI transceiver   Jagan Teki
• [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame   Jerome Brunet
• [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame   Jerome Brunet
• [PATCH V6 4/5] tty: serial: meson: Make some bit of the REG5 register writable   Jerome Brunet
• [PATCH V6 3/5] tty: serial: meson: Describes the calculation of the UART baud rate clock using a clock frame   Yu Tu
• [PATCH v10 0/4] clk: meson: add a sub EMMC clock controller support   Liang Yang
• [PATCH v10 1/4] clk: meson: add one based divider support for sclk   Liang Yang
• [PATCH v10 2/4] clk: meson: add emmc sub clock phase delay driver   Liang Yang
• [PATCH v10 3/4] clk: meson: add DT documentation for emmc clock controller   Liang Yang
• [PATCH v10 4/4] clk: meson: add sub MMC clock controller driver   Liang Yang
• [PATCH 0/3] arm64: dts: meson: add BL32 reserved region to Beelink g12b devices   Christian Hewitt
• [PATCH 1/3] arm64: dts: meson: add BL32 reserved-memory region to GT-King   Christian Hewitt
• [PATCH 2/3] arm64: dts: meson: add BL32 reserved-memory region to GT-King Pro   Christian Hewitt
• [PATCH 3/3] arm64: dts: meson: add BL32 reserved-memory region to GS-King-X   Christian Hewitt
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Laurent Pinchart
• [PATCH v2] phy: dphy: Correct clk_pre parameter   Liu Ying
• [PATCH v3] phy: dphy: Correct clk_pre parameter   Liu Ying
• [PATCH v4] phy: dphy: Correct clk_pre parameter   Liu Ying
• [PATCH V6 0/5] Use CCF to describe the UART baud rate clock   Kevin Hilman
• [PATCH 0/3] arm64: dts: meson: add BL32 reserved region to Beelink g12b devices   Kevin Hilman
• [PATCH] mmc: meson: Fix usage of meson_mmc_post_req()   Kevin Hilman
• [PATCH 0/3] arm64: dts: meson: add BL32 reserved region to Beelink g12b devices   Christian Hewitt
• [PATCH v10 0/4] clk: meson: add a sub EMMC clock controller support   Neil Armstrong
• [PATCH 0/3] arm64: dts: meson: add BL32 reserved region to Beelink g12b devices   Neil Armstrong
• [PATCH 0/3] arm64: dts: meson: add ATF BL32 reserved-memory regions   Christian Hewitt
• [PATCH 1/3] arm64: dts: meson-gx: add ATF BL32 reserved-memory region   Christian Hewitt
• [PATCH 2/3] arm64: dts: meson-g12: add ATF BL32 reserved-memory region   Christian Hewitt
• [PATCH 3/3] arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610   Christian Hewitt
• [PATCH 1/3] arm64: dts: meson-gx: add ATF BL32 reserved-memory region   Vyacheslav
• [PATCH 0/2] Power: meson-s4: add s4 power domain driver   Shunzhou Jiang
• [PATCH 1/2] dt-bindings: power: add Amlogic s4 power domains bindings   Shunzhou Jiang
• [PATCH 2/2] soc: s4: Add support for power domains controller   Shunzhou Jiang
• [PATCH 1/3] arm64: dts: meson-gx: add ATF BL32 reserved-memory region   Christian Hewitt
• [PATCH v10 0/4] clk: meson: add a sub EMMC clock controller support   Liang Yang
• [PATCH v10 0/4] clk: meson: add a sub EMMC clock controller support   Jerome Brunet
• [PATCH v10 0/4] clk: meson: add a sub EMMC clock controller support   Liang Yang
• [PATCH] spi: meson-spicc: add IRQ check in meson_spicc_probe   Miaoqian Lin
• [PATCH] spi: meson-spicc: add IRQ check in meson_spicc_probe   Mark Brown
• [PATCH] arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator   Lutz Koschorreck
• [PATCH v6 0/3] phy: amlogic: fix shared reset control use   Vinod Koul
• [PATCH] arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator   Neil Armstrong
• [PATCH 1/3] arm64: dts: meson-gx: add ATF BL32 reserved-memory region   Neil Armstrong
• [PATCH 1/3] arm64: dts: meson-gx: add ATF BL32 reserved-memory region   Neil Armstrong
• [PATCH 2/3] arm64: dts: meson-g12: add ATF BL32 reserved-memory region   Neil Armstrong
• [PATCH 3/3] arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1: fix wrong GPIO domain for GPIOE_2   Dongjin Kim
• [PATCH] arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'   Dongjin Kim
• [PATCH] arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator   Lutz Koschorreck
• [PATCH] arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1: fix wrong GPIO domain for GPIOE_2   Neil Armstrong
• [PATCH v2] arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator   Lutz Koschorreck
• [PATCH v2] arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1: fix wrong GPIO domain for GPIOE_2   Dongjin Kim
• [PATCH] arm64: dts: meson-sm1: fix wrong GPIO domain for GPIOE_2   Neil Armstrong
• [PATCH] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2   Dongjin Kim
• [PATCH] arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2   Neil Armstrong
• [PATCH v2 0/2] refine the NFC clock framework   Liang Yang
• [PATCH v2 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH v2 2/2] dt-bindings: nand: meson: refine Amlogic NAND controller driver   Liang Yang
• [PATCH v2 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Miquel Raynal
• [PATCH v2 1/2] mtd: rawnand: meson: discard the common MMC sub clock framework   Liang Yang
• [PATCH] arm64: dts: meson-sm1-odroid: fix boot loop after reboot   Lutz Koschorreck
• [PATCH] arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator   Lutz Koschorreck
• [PATCH v4 0/3] pinctrl: meson-s4: add pinctrl driver   Linus Walleij
• [PATCH 1/4] pwm: meson: Drop always false check from .request()   Thierry Reding

Last message date: Mon Jan 31 23:47:47 PST 2022
Archived on: Mon Jan 31 23:47:55 PST 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...