[PATCH v2 0/3] meson-g12: add pwm and uart pin muxing options

[Gary Bisson]

This series adds a few pin muxing options needed for our HW platform (to
be submitted soon).

1- pwm_f: adding missing both GPIOZ_12 & GPIOA_11 options
  -> tested GPIOA_11 as mipi display backlight
  -> order for this patch is not alphabetical but follows doc order (to
match current order)
2- uart_ao_b: adding both options for ao_b uart + its rts/cts pins
  -> tested on custom hw too

Changes v1->v2:
- rename uart_ao_b signals as suggested by Neil

Let me know if you have any questions.

Regards,
Gary

Gary Bisson (3):
  pinctrl: meson-g12a: add more pwm_f options
  arm64: dts: meson-g12-common: add more pwm_f options
  arm64: dts: meson-g12-common: add uart_ao_b pins muxing

 .../boot/dts/amlogic/meson-g12-common.dtsi    | 43 +++++++++++++++++++
 drivers/pinctrl/meson/pinctrl-meson-g12a.c    |  6 ++-
 2 files changed, 48 insertions(+), 1 deletion(-)

-- 
2.34.1