[PATCH] dt-bindings: nand: meson: fix controller clock

Liang Yang liang.yang at amlogic.com
Thu Jan 6 18:48:08 PST 2022


Hi Miquel,

On 2022/1/6 16:12, Miquel Raynal wrote:
> [ EXTERNAL EMAIL ]
> 
> Hello,
> 
> liang.yang at amlogic.com wrote on Thu, 6 Jan 2022 11:31:30 +0800:
> 
> This patch should be in a series with "mtd: rawnand: meson: fix the
> clock after discarding sd_emmc_c_clk" and possibly come first.
> 
> You miss a commit message which is _very_ important given the type of
> change you propose.
>   
>> Change-Id: I1425b491d8b95061e1ce358ef33143433fc94d24
> 
> Change IDs have nothing to do here.
> 
> However a Fixes and a Signed-off-by are welcome.
> 
> You'll also need to Cc: Rob H. in your v2.
> 
ok, i will fix these once we clarify the patch about sd_emmc_c_clk and 
decide to use this patch.
>> ---
>>   .../bindings/mtd/amlogic,meson-nand.txt        | 18 +++---------------
>>   1 file changed, 3 insertions(+), 15 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> index 5794ab1147c1..37f16fe4fe66 100644
>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
>> @@ -14,11 +14,6 @@ Required properties:
>>   - clock-names: Should contain the following:
>>   	"core" - NFC module gate clock
>>   	"device" - device clock from eMMC sub clock controller
>> -	"rx" - rx clock phase
>> -	"tx" - tx clock phase
>> -
>> -- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
>> -				controller port C
>>   
>>   Optional children nodes:
>>   Children nodes represent the available nand chips.
>> @@ -28,11 +23,6 @@ see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindi
>>   
>>   Example demonstrate on AXG SoC:
>>   
>> -	sd_emmc_c_clkc: mmc at 7000 {
>> -		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
>> -		reg = <0x0 0x7000 0x0 0x800>;
>> -	};
>> -
>>   	nand-controller at 7800 {
>>   		compatible = "amlogic,meson-axg-nfc";
>>   		reg = <0x0 0x7800 0x0 0x100>;
>> @@ -41,11 +31,9 @@ Example demonstrate on AXG SoC:
>>   		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>>   
>>   		clocks = <&clkc CLKID_SD_EMMC_C>,
>> -			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
>> -			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
>> -			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
>> -		clock-names = "core", "device", "rx", "tx";
>> -		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
>> +			<&clkc CLKID_FCLK_DIV2>;
>> +		clock-names = "core", "device";
>> +		sd_emmc_c_clkc = <0xffe07000>;
>>   
>>   		pinctrl-names = "default";
>>   		pinctrl-0 = <&nand_pins>;
> 
> 
> Thanks,
> Miquèl
> 
> .



More information about the linux-amlogic mailing list