[PATCH] arm64: dts: meson: add audio playback to P212

[Neil Armstrong]

Hi,

On 13/01/2022 05:45, Christian Hewitt wrote:
> Add initial audio support limited to HDMI i2s.
> 
> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
> ---
> The P212 dts is widely used with Android box devices that follow the
> reference design. The real P212 development board probably has many
> more audio capabilities, but as a minimum we can enable HDMI output
> and help box users too.
> 
>  .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> index 2602940c2077..a39830379c74 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
> @@ -7,6 +7,7 @@
>  /dts-v1/;
>  
>  #include "meson-gxl-s905x-p212.dtsi"
> +#include <dt-bindings/sound/meson-aiu.h>
>  
>  / {
>  	compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
> @@ -32,6 +33,45 @@
>  			};
>  		};
>  	};
> +
> +	sound {
> +		compatible = "amlogic,gx-sound-card";
> +		model = "S905X-P212";
> +		assigned-clocks = <&clkc CLKID_MPLL0>,
> +				  <&clkc CLKID_MPLL1>,
> +				  <&clkc CLKID_MPLL2>;
> +		assigned-clock-parents = <0>, <0>, <0>;
> +		assigned-clock-rates = <294912000>,
> +				       <270950400>,
> +				       <393216000>;
> +		status = "okay";
> +
> +		dai-link-0 {
> +			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
> +			dai-format = "i2s";
> +			mclk-fs = <256>;
> +
> +			codec-0 {
> +				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
> +			};
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
> +
> +			codec-0 {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&aiu {
> +	status = "okay";
>  };
>  
>  &cec_AO {
> 

The P212 ref board has an analog audio output with a DIO2133CT14 amplifier unmuted by default with the active high GPIOH_5 to mute.

It's very probable all the STB boxes uses the same scheme, so it'll be safe to add the analog audio output here exactly like libretech-cc.

Neil