[PATCH v2 0/3] meson-g12: add pwm and uart pin muxing options
Neil Armstrong
narmstrong at baylibre.com
Thu Jan 13 01:02:01 PST 2022
Hi,
On 12/01/2022 22:16, Gary Bisson wrote:
> This series adds a few pin muxing options needed for our HW platform (to
> be submitted soon).
>
> 1- pwm_f: adding missing both GPIOZ_12 & GPIOA_11 options
> -> tested GPIOA_11 as mipi display backlight
> -> order for this patch is not alphabetical but follows doc order (to
> match current order)
> 2- uart_ao_b: adding both options for ao_b uart + its rts/cts pins
> -> tested on custom hw too
>
> Changes v1->v2:
> - rename uart_ao_b signals as suggested by Neil
>
> Let me know if you have any questions.
Thanks, I'm waiting for Linus to pick the pinctrl patch and I'll apply the DT patches.
Thanks,
Neil
>
> Regards,
> Gary
>
> Gary Bisson (3):
> pinctrl: meson-g12a: add more pwm_f options
> arm64: dts: meson-g12-common: add more pwm_f options
> arm64: dts: meson-g12-common: add uart_ao_b pins muxing
>
> .../boot/dts/amlogic/meson-g12-common.dtsi | 43 +++++++++++++++++++
> drivers/pinctrl/meson/pinctrl-meson-g12a.c | 6 ++-
> 2 files changed, 48 insertions(+), 1 deletion(-)
>
More information about the linux-amlogic
mailing list