September 2016 Archives by author
Starting: Thu Sep 1 14:43:08 PDT 2016
Ending: Thu Sep 29 21:56:20 PDT 2016
Messages: 259
- [PATCH v6 0/3] arm64 kexec-tools patches
Pratyush Anand
- [PATCH] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Pratyush Anand
- [PATCH v3 1/8] arm64: identify PHYS_OFFSET correctly
Pratyush Anand
- [PATCH v2] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Pratyush Anand
- [PATCH 0/8] ppc64: Add support to understand Power ISA 3.0 based kernel
Hari Bathini
- [PATCH 1/8] ppc64: fix vtop page translation for 4K pages
Hari Bathini
- [PATCH 2/8] ppc64: Use kernel terminology for each level in 4-level page table
Hari Bathini
- [PATCH 3/8] ppc64: address changes in kernel v4.5
Hari Bathini
- [PATCH 4/8] ppc64: address change in _PAGE_PRESNT flag for PowerISA v3.0
Hari Bathini
- [PATCH 5/8] ppc64: use physical addresses and unfold pud for 64K page size
Hari Bathini
- [PATCH 6/8] ppc64: support big endian Linux page tables
Hari Bathini
- [PATCH 7/8] ppc64: use the same masked bit values for 4K and 64K pagesizes
Hari Bathini
- [PATCH 8/8] ppc64: enable address translation support for radix mmu
Hari Bathini
- [RESEND PATCH 0/8] makedumpfile: Add support to understand Power ISA 3.0 based kernel
Hari Bathini
- [RESEND PATCH 1/8] makedumpfile/ppc64: fix vtop page translation for 4K pages
Hari Bathini
- [RESEND PATCH 2/8] makedumpfile/ppc64: Use kernel terminology for each level in 4-level page table
Hari Bathini
- [RESEND PATCH 3/8] makedumpfile/ppc64: address changes in kernel v4.5
Hari Bathini
- [RESEND PATCH 4/8] makedumpfile/ppc64: address change in _PAGE_PRESNT flag for PowerISA v3.0
Hari Bathini
- [RESEND PATCH 5/8] makedumpfile/ppc64: use physical addresses and unfold pud for 64K page size
Hari Bathini
- [RESEND PATCH 6/8] makedumpfile/ppc64: support big endian Linux page tables
Hari Bathini
- [RESEND PATCH 7/8] makedumpfile/ppc64: use the same masked bit values for 4K and 64K pagesizes
Hari Bathini
- [RESEND PATCH 8/8] makedumpfile/ppc64: enable address translation support for radix mmu
Hari Bathini
- [PATCH v8 00/13] kexec_file_load implementation for PowerPC
Thiago Jung Bauermann
- [PATCH v8 01/13] kexec_file: Allow arch-specific memory walking for kexec_add_buffer
Thiago Jung Bauermann
- [PATCH v8 02/13] kexec_file: Change kexec_add_buffer to take kexec_buf as argument.
Thiago Jung Bauermann
- [PATCH v8 03/13] kexec_file: Factor out kexec_locate_mem_hole from kexec_add_buffer.
Thiago Jung Bauermann
- [PATCH v8 04/13] powerpc: Change places using CONFIG_KEXEC to use CONFIG_KEXEC_CORE instead.
Thiago Jung Bauermann
- [PATCH v8 05/13] powerpc: Factor out relocation code from module_64.c to elf_util_64.c.
Thiago Jung Bauermann
- [PATCH v8 06/13] powerpc: Generalize elf64_apply_relocate_add.
Thiago Jung Bauermann
- [PATCH v8 07/13] powerpc: Adapt elf64_apply_relocate_add for kexec_file_load.
Thiago Jung Bauermann
- [PATCH v8 08/13] powerpc: Add functions to read ELF files of any endianness.
Thiago Jung Bauermann
- [PATCH v8 09/13] powerpc: Implement kexec_file_load.
Thiago Jung Bauermann
- [PATCH v8 10/13] powerpc: Add code to work with device trees in kexec_file_load.
Thiago Jung Bauermann
- [PATCH v8 11/13] powerpc: Add support for loading ELF kernels with kexec_file_load.
Thiago Jung Bauermann
- [PATCH v8 12/13] powerpc: Add purgatory for kexec_file_load implementation.
Thiago Jung Bauermann
- [PATCH v8 13/13] powerpc: Enable CONFIG_KEXEC_FILE in powerpc server defconfigs.
Thiago Jung Bauermann
- Kexec regression in next-20160906
Thiago Jung Bauermann
- [PATCH v4 0/5] kexec_file: Add buffer hand-over for the next kernel
Thiago Jung Bauermann
- [PATCH v5 0/5] kexec_file: Add buffer hand-over for the next kernel
Thiago Jung Bauermann
- [PATCH v5 1/5] kexec_file: Include the purgatory segment in the kexec image checksum.
Thiago Jung Bauermann
- [PATCH v5 2/5] kexec_file: Add buffer hand-over support for the next kernel
Thiago Jung Bauermann
- [PATCH v5 3/5] powerpc: kexec_file: Add buffer hand-over support for the next kernel
Thiago Jung Bauermann
- [PATCH v5 4/5] kexec_file: Add mechanism to update kexec segments.
Thiago Jung Bauermann
- [PATCH v5 5/5] IMA: Demonstration code for kexec buffer passing.
Thiago Jung Bauermann
- [PATCH v5 1/5] kexec_file: Include the purgatory segment in the kexec image checksum.
Thiago Jung Bauermann
- [PATCH v5 1/5] kexec_file: Include the purgatory segment in the kexec image checksum.
Thiago Jung Bauermann
- [PATCH v8 11/13] powerpc: Add support for loading ELF kernels with kexec_file_load.
Thiago Jung Bauermann
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Thiago Jung Bauermann
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Thiago Jung Bauermann
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Thiago Jung Bauermann
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Thiago Jung Bauermann
- [PATCH v4 3/5] kexec_file: Allow skipping checksum calculation for some segments.
Eric W. Biederman
- [PATCH v4 0/5] kexec_file: Add buffer hand-over for the next kernel
Eric W. Biederman
- [PATCH v4 0/5] kexec_file: Add buffer hand-over for the next kernel
Eric W. Biederman
- [PATCH v4 0/5] kexec_file: Add buffer hand-over for the next kernel
Eric W. Biederman
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Eric W. Biederman
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Eric W. Biederman
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Eric W. Biederman
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Eric W. Biederman
- [PATCH v5 00/10] ima: carry the measurement list across kexec
Eric W. Biederman
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Eric W. Biederman
- [PATCH v26 0/7] arm64: add kdump support
Ard Biesheuvel
- [PATCH v26 0/7] arm64: add kdump support
Ard Biesheuvel
- makedumpfile issues many readpage_elf: Attempt to read non-existent page
Louis Bouchard
- makedumpfile issues many readpage_elf: Attempt to read non-existent page
Louis Bouchard
- [PATCH v26 1/7] arm64: kdump: reserve memory for crash dump kernel
Matthias Bruger
- [PATCH v26 3/7] arm64: kdump: add kdump support
Matthias Brugger
- [PATCH v26 6/7] arm64: kdump: update a kernel doc
Matthias Brugger
- [PATCH v6 0/3] arm64 kexec-tools patches
Matthias Brugger
- [PATCH v10 RESEND 0/3] Documentation: Add description of enable multi-cpus support for kdump
Jonathan Corbet
- Scheduled Maintenance & Upgrade
Help Desk
- [PATCH v1] kdump, vmcoreinfo: report memory sections virtual addresses
Thomas Garnier
- [PATCH v1] kexec/arch/i386: Add support for KASLR memory randomization
Thomas Garnier
- [PATCH v1] kexec/arch/i386: Add support for KASLR memory randomization
Thomas Garnier
- [PATCH v1] kdump, vmcoreinfo: report memory sections virtual addresses
Baoquan He
- [PATCH] bnx2: Reset device during driver initialization
Baoquan He
- [PATCH] bnx2: Reset device during driver initialization
Baoquan He
- [PATCH] bnx2: Reset device during driver initialization
Baoquan He
- [PATCH] bnx2: Reset device during driver initialization
Baoquan He
- [PATCH] bnx2: Reset device during driver initialization
Baoquan He
- [PATCH v2] bnx2: Reset device during driver initialization
Baoquan He
- [PATCH v1] kdump, vmcoreinfo: report memory sections virtual addresses
Baoquan He
- [PATCH v1] kexec/arch/i386: Add support for KASLR memory randomization
Baoquan He
- [PATCH v2] bnx2: Reset device during driver initialization
Baoquan He
- [PATCH v5 0/8] Fix kdump faults on system with amd iommu
Baoquan He
- [PATCH v5 1/8] iommu/amd: Detect pre enabled translation
Baoquan He
- [PATCH v5 2/8] iommu/amd: add early_enable_iommu() wrapper function
Baoquan He
- [PATCH v5 3/8] iommu/amd: Define bit fields for DTE particularly
Baoquan He
- [PATCH v5 4/8] iommu/amd: Add function copy_dev_tables
Baoquan He
- [PATCH v5 5/8] iommu/amd: copy old trans table from old kernel
Baoquan He
- [PATCH v5 6/8] iommu/amd: Do not re-enable dev table entries in kdump
Baoquan He
- [PATCH v5 7/8] iommu/amd: Don't update domain info to dte entry at iommu init stage
Baoquan He
- [PATCH v5 8/8] iommu/amd: Update domain into to dte entry during device driver init
Baoquan He
- [PATCH v10 0/3] Documentation: add description of enable multi-cpus support for kdump
Baoquan He
- [PATCH v10 1/3] docs: kernel-parameter : Improve the description of nr_cpus and maxcpus
Baoquan He
- [PATCH v10 2/3] Documentation: kdump: remind user of nr_cpus
Baoquan He
- [PATCH v10 3/3] Documentation: kdump: add description of enable multi-cpus support
Baoquan He
- [PATCH v10 3/3] Documentation: kdump: add description of enable multi-cpus support
Baoquan He
- [PATCH v10 RESEND 0/3] Documentation: Add description of enable multi-cpus support for kdump
Baoquan He
- [PATCH v10 RESEND 1/3] docs: kernel-parameter : Improve the description of nr_cpus and maxcpus
Baoquan He
- [PATCH v10 RESEND 2/3] Documentation: kdump: Remind user of nr_cpus
Baoquan He
- [PATCH v10 RESEND 3/3] Documentation: kdump: Add description of enable multi-cpus support
Baoquan He
- [PATCH v10 RESEND 0/3] Documentation: Add description of enable multi-cpus support for kdump
Baoquan He
- [PATCH v5 4/8] iommu/amd: Add function copy_dev_tables
Baoquan He
- [PATCH v5 5/8] iommu/amd: copy old trans table from old kernel
Baoquan He
- [PATCH v5 6/8] iommu/amd: Do not re-enable dev table entries in kdump
Baoquan He
- [PATCH v5 7/8] iommu/amd: Don't update domain info to dte entry at iommu init stage
Baoquan He
- [PATCH v5 8/8] iommu/amd: Update domain into to dte entry during device driver init
Baoquan He
- [PATCH v5 7/8] iommu/amd: Don't update domain info to dte entry at iommu init stage
Baoquan He
- [PATCH 0/3] makedumpfile: Add support of mm randomization
Baoquan He
- [PATCH 0/3] makedumpfile: Add support of mm randomization
Baoquan He
- [PATCH v5 8/8] iommu/amd: Update domain into to dte entry during device driver init
Baoquan He
- [PATCH v5 5/8] iommu/amd: copy old trans table from old kernel
Baoquan He
- [PATCH v5 5/8] iommu/amd: copy old trans table from old kernel
Baoquan He
- [PATCH 3/3] makedumpfile: Add support for MM randomization
Baoquan He
- [PATCH v26 7/7] Documentation: dt: chosen properties for arm64 kdump
Rob Herring
- [PATCH v6 0/3] arm64 kexec-tools patches
Simon Horman
- [PATCH] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Simon Horman
- [PATCH v1] kexec/arch/i386: Add support for KASLR memory randomization
Simon Horman
- [PATCH] kexec: fix mem_regions_sort()
Simon Horman
- [PATCH v3 0/8] (kexec-tools) arm64: add kdump support
Simon Horman
- [PATCH] kexec: socket not released when error situation occur.
Simon Horman
- [ANNOUNCE] kexec-tools 2.0.13
Simon Horman
- [PATCH v2] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Simon Horman
- [PATCH v3 0/8] (kexec-tools) arm64: add kdump support
Simon Horman
- Limitations/gotchas of kexec?
Clif Houck
- [PATCH v24 0/9] arm64: add kdump support
Manish Jaggi
- [PATCH v24 0/9] arm64: add kdump support
Manish Jaggi
- [PATCH v24 0/9] arm64: add kdump support
Manish Jaggi
- [V4 PATCH 1/2] x86/panic: Replace smp_send_stop() with kdump friendly version in panic path
河合英宏 / KAWAI,HIDEHIRO
- [V4 PATCH 1/2] x86/panic: Replace smp_send_stop() with kdump friendly version in panic path
河合英宏 / KAWAI,HIDEHIRO
- [V4 PATCH 2/2] mips/panic: Replace smp_send_stop() with kdump friendly version in panic path
河合英宏 / KAWAI,HIDEHIRO
- "kernel version not supported" message is causing concerns
Atsushi Kumagai
- [PATCH] Cleanup: Use a negative number for uninitialized file descriptors
Atsushi Kumagai
- [PATCH v2] Cleanup: Use a negative number for uninitialized file descriptors
Atsushi Kumagai
- [PATCH v3 3/3] close_dump_bitmap: simplify logic
Atsushi Kumagai
- [PATCH v3 1/3] open_dump_bitmap: open bitmap file in non-cyclic case
Atsushi Kumagai
- makedumpfile issues many readpage_elf: Attempt to read non-existent page
Atsushi Kumagai
- [PATCH 0/2] arm64: support --mem-min and --mem-max parameters
Geoff Levand
- [PATCH 0/2] arm64: support --mem-min and --mem-max parameters
Geoff Levand
- [PATCH v5 3/3] arm64: Add support for binary image files
Geoff Levand
- [PATCH v5 1/3] kexec: Add common device tree routines
Geoff Levand
- [PATCH v5 2/3] arm64: Add arm64 kexec support
Geoff Levand
- [PATCH v5 0/3] arm64 kexec-tools patches
Geoff Levand
- [PATCH v5 2/3] arm64: Add arm64 kexec support
Geoff Levand
- [PATCH v5 2/3] arm64: Add arm64 kexec support
Geoff Levand
- [PATCH v6 1/3] kexec: Add common device tree routines
Geoff Levand
- [PATCH v6 2/3] arm64: Add arm64 kexec support
Geoff Levand
- [PATCH v6 3/3] arm64: Add support for binary image files
Geoff Levand
- [PATCH v6 0/3] arm64 kexec-tools patches
Geoff Levand
- [PATCH] bnx2: Reset device during driver initialization
David Miller
- [PATCH v2] bnx2: Reset device during driver initialization
David Miller
- [PATCH v26 2/7] arm64: kdump: implement machine_crash_shutdown()
James Morse
- [PATCH v26 2/7] arm64: kdump: implement machine_crash_shutdown()
James Morse
- [PATCH v26 3/7] arm64: kdump: add kdump support
James Morse
- [PATCH v26 0/7] arm64: add kdump support
James Morse
- [PATCH v26 4/7] arm64: kdump: add VMCOREINFO's for user-space coredump tools
James Morse
- [PATCH v26 6/7] arm64: kdump: update a kernel doc
James Morse
- [PATCH v26 0/7] arm64: add kdump support
James Morse
- [V4 PATCH 1/2] x86/panic: Replace smp_send_stop() with kdump friendly version in panic path
Xunlei Pang
- [PATCH v5 1/5] kexec_file: Include the purgatory segment in the kexec image checksum.
Stephen Rothwell
- [PATCH v24 9/9] Documentation: dt: chosen properties for arm64 kdump
Mark Rutland
- [PATCH] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Madhavan Srinivasan
- [PATCH] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Madhavan Srinivasan
- [PATCH v2] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Madhavan Srinivasan
- [PATCH v24 9/9] Documentation: dt: chosen properties for arm64 kdump
AKASHI Takahiro
- [PATCH v24 0/9] arm64: add kdump support
AKASHI Takahiro
- Memory range end be inclusive or exclusive? Re: [PATCH v1 1/4] kexec: (bugfix) calc correct end address of memory ranges in device tree
AKASHI Takahiro
- [PATCH v5 2/3] arm64: Add arm64 kexec support
AKASHI Takahiro
- [PATCH v26 0/7] arm64: add kdump support
AKASHI Takahiro
- [PATCH v26 1/7] arm64: kdump: reserve memory for crash dump kernel
AKASHI Takahiro
- [PATCH v26 2/7] arm64: kdump: implement machine_crash_shutdown()
AKASHI Takahiro
- [PATCH v26 3/7] arm64: kdump: add kdump support
AKASHI Takahiro
- [PATCH v26 4/7] arm64: kdump: add VMCOREINFO's for user-space coredump tools
AKASHI Takahiro
- [PATCH v26 5/7] arm64: kdump: enable kdump in the arm64 defconfig
AKASHI Takahiro
- [PATCH v26 6/7] arm64: kdump: update a kernel doc
AKASHI Takahiro
- [PATCH v26 7/7] Documentation: dt: chosen properties for arm64 kdump
AKASHI Takahiro
- [PATCH v3 0/8] (kexec-tools) arm64: add kdump support
AKASHI Takahiro
- [PATCH v3 1/8] arm64: identify PHYS_OFFSET correctly
AKASHI Takahiro
- [PATCH v3 2/8] kexec: generalize and rename get_kernel_stext_sym()
AKASHI Takahiro
- [PATCH v3 3/8] arm64: kdump: identify memory regions
AKASHI Takahiro
- [PATCH v3 4/8] arm64: kdump: add elf core header segment
AKASHI Takahiro
- [PATCH v3 5/8] arm64: kdump: set up kernel image segment
AKASHI Takahiro
- [PATCH v3 6/8] arm64: kdump: set up other segments
AKASHI Takahiro
- [PATCH v3 7/8] arm64: kdump: add DT properties to crash dump kernel's dtb
AKASHI Takahiro
- [PATCH v3 8/8] arm64: kdump: Add support for binary image files
AKASHI Takahiro
- [PATCH v26 0/7] arm64: add kdump support
AKASHI Takahiro
- [PATCH v1] kdump, vmcoreinfo: report memory sections virtual addresses
AKASHI Takahiro
- [PATCH v26 2/7] arm64: kdump: implement machine_crash_shutdown()
AKASHI Takahiro
- [PATCH v26 2/7] arm64: kdump: implement machine_crash_shutdown()
AKASHI Takahiro
- [PATCH v26 3/7] arm64: kdump: add kdump support
AKASHI Takahiro
- [PATCH v26 6/7] arm64: kdump: update a kernel doc
AKASHI Takahiro
- [PATCH v26 0/7] arm64: add kdump support
AKASHI Takahiro
- [PATCH v26 0/7] arm64: add kdump support
AKASHI Takahiro
- [PATCH v26 1/7] arm64: kdump: reserve memory for crash dump kernel
AKASHI Takahiro
- [PATCH v3 1/8] arm64: identify PHYS_OFFSET correctly
AKASHI Takahiro
- [PATCH v3 0/8] (kexec-tools) arm64: add kdump support
AKASHI Takahiro
- [PATCH v3 0/8] (kexec-tools) arm64: add kdump support
AKASHI Takahiro
- [PATCH] Cleanup: Use a negative number for uninitialized file descriptors
Petr Tesarik
- [PATCH] Cleanup: Use a negative number for uninitialized file descriptors
Petr Tesarik
- [PATCH v2] Cleanup: Use a negative number for uninitialized file descriptors
Petr Tesarik
- Limitations/gotchas of kexec?
Petr Tesarik
- [PATCH v2 1/3] open_dump_bitmap: open bitmap file in non-cyclic case
Martin Wilck
- [PATCH v2 2/3] move call to open_dump_bitmap() to after call to initial()
Martin Wilck
- [PATCH v2 3/3] close_dump_bitmap: simplify logic
Martin Wilck
- [PATCH v3 3/3] close_dump_bitmap: simplify logic
Martin Wilck
- [PATCH v3 3/3] close_dump_bitmap: simplify logic
Martin Wilck
- [PATCH v3 1/3] open_dump_bitmap: open bitmap file in non-cyclic case
Martin Wilck
- [PATCH v3 2/3] move call to open_dump_bitmap() to after call to initial()
Martin Wilck
- [PATCH v3 3/3] close_dump_bitmap: simplify logic
Martin Wilck
- [V4 PATCH 1/2] x86/panic: Replace smp_send_stop() with kdump friendly version in panic path
'Dave Young'
- [PATCH v1] kexec/arch/i386: Add support for KASLR memory randomization
Dave Young
- [PATCH 0/3] makedumpfile: Add support of mm randomization
Dave Young
- [PATCH 0/3] makedumpfile: Add support of mm randomization
Dave Young
- [PATCH 0/3] makedumpfile: Add support of mm randomization
Dave Young
- [PATCH 0/3] makedumpfile: Add support of mm randomization
Dave Young
- [PATCH] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Dave Young
- [PATCH v1] kexec/arch/i386: Add support for KASLR memory randomization
Dave Young
- [PATCH v2] kexec/fs2dt: Check for NULL pointer in dt_copy_old_root_param()
Dave Young
- [PATHC v2 5/9] ima: on soft reboot, save the measurement list
Mimi Zohar
- [PATCH v3 0/9] ima: carry the measurement list across kexec
Mimi Zohar
- [PATCH v3 1/9] ima: on soft reboot, restore the measurement list
Mimi Zohar
- [PATCH v3 2/9] ima: permit duplicate measurement list entries
Mimi Zohar
- [PATCH v3 3/9] ima: maintain memory size needed for serializing the measurement list
Mimi Zohar
- [PATCH v3 4/9] ima: serialize the binary_runtime_measurements
Mimi Zohar
- [PATCH v3 5/9] ima: on soft reboot, save the measurement list
Mimi Zohar
- [PATCH v3 6/9] ima: store the builtin/custom template definitions in a list
Mimi Zohar
- [PATCH v3 7/9] ima: support restoring multiple template formats
Mimi Zohar
- [PATCH v3 8/9] ima: define a canonical binary_runtime_measurements list format
Mimi Zohar
- [PATCH v3 9/9] ima: platform-independent hash value
Mimi Zohar
- [PATCH v4 0/5] kexec_file: Add buffer hand-over for the next kernel
Mimi Zohar
- [PATCH v4 0/9] ima: carry the measurement list across kexec
Mimi Zohar
- [PATCH v4 1/9] ima: on soft reboot, restore the measurement list
Mimi Zohar
- [PATCH v4 2/9] ima: permit duplicate measurement list entries
Mimi Zohar
- [PATCH v4 3/9] ima: maintain memory size needed for serializing the measurement list
Mimi Zohar
- [PATCH v4 4/9] ima: serialize the binary_runtime_measurements
Mimi Zohar
- [PATCH v4 5/9] ima: on soft reboot, save the measurement list
Mimi Zohar
- [PATCH v4 6/9] ima: store the builtin/custom template definitions in a list
Mimi Zohar
- [PATCH v4 7/9] ima: support restoring multiple template formats
Mimi Zohar
- [PATCH v4 8/9] ima: define a canonical binary_runtime_measurements list format
Mimi Zohar
- [PATCH v4 9/9] ima: platform-independent hash value
Mimi Zohar
- [PATHC v2 0/9] ima: carry the measurement list across kexec
Mimi Zohar
- [PATCH v5 00/10] ima: carry the measurement list across kexec
Mimi Zohar
- [PATCH v5 01/10] powerpc: ima: Get the kexec buffer passed by the previous kernel
Mimi Zohar
- [PATCH v5 02/10] ima: on soft reboot, restore the measurement list
Mimi Zohar
- [PATCH v5 03/10] ima: permit duplicate measurement list entries
Mimi Zohar
- [PATCH v5 04/10] ima: maintain memory size needed for serializing the measurement list
Mimi Zohar
- [PATCH v5 05/10] powerpc: ima: Send the kexec buffer to the next kernel
Mimi Zohar
- [PATCH v5 06/10] ima: on soft reboot, save the measurement list
Mimi Zohar
- [PATCH v5 07/10] ima: store the builtin/custom template definitions in a list
Mimi Zohar
- [PATCH v5 08/10] ima: support restoring multiple template formats
Mimi Zohar
- [PATCH v5 09/10] ima: define a canonical binary_runtime_measurements list format
Mimi Zohar
- [PATCH v5 10/10] ima: platform-independent hash value
Mimi Zohar
- [PATCH v5 00/10] ima: carry the measurement list across kexec
Mimi Zohar
- [PATCH v24 0/9] arm64: add kdump support
Marc Zyngier
- [PATCH v24 0/9] arm64: add kdump support
Marc Zyngier
- [PATCH v26 2/7] arm64: kdump: implement machine_crash_shutdown()
Marc Zyngier
- Enquiry.
wanggroup5 at acrystal.biz
- Coucou
mecelia_01 at 163.com
Last message date:
Thu Sep 29 21:56:20 PDT 2016
Archived on: Thu Oct 13 01:12:24 PDT 2016
This archive was generated by
Pipermail 0.09 (Mailman edition).