June 2026 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jun 1 05:29:52 PDT 2026
Ending: Mon Jun 22 10:21:19 PDT 2026
Messages: 189

• [PATCH 0/3] debug_ll: Cleanup conflicts for multiple SoCs   Sascha Hauer
  • [PATCH 1/3] debug_ll: give PUTC_LL a common prototype   Sascha Hauer
  • [PATCH 2/3] debug_ll: Add Kconfig options for debug uarts that have none   Sascha Hauer
  • [PATCH 3/3] debug_ll: pl011: define PUTC_LL only when requested   Sascha Hauer
  • [PATCH 0/3] debug_ll: Cleanup conflicts for multiple SoCs   Sascha Hauer
• [PATCH] lib: gui: png_pico: fix use-after-free and double-free in png_open   Johannes Schneider
  • [PATCH] lib: gui: png_pico: fix use-after-free and double-free in png_open   Ahmad Fatoum
    • [PATCH] lib: gui: png_pico: fix use-after-free and double-free in png_open   SCHNEIDER Johannes
• [PATCH 0/7] video: enable boot splash on i.MX8MP with LVDS panel   Johannes Schneider
  • [PATCH 1/6] clk: imx8mp: add 700 MHz rate entry for VIDEO_PLL1   Johannes Schneider
    • [PATCH 1/6] clk: imx8mp: add 700 MHz rate entry for VIDEO_PLL1   Ahmad Fatoum
  • [PATCH 2/6] pmdomain: imx8mp-blk-ctrl: add media blk-ctrl power domain support   Johannes Schneider
    • [PATCH 2/6] pmdomain: imx8mp-blk-ctrl: add media blk-ctrl power domain support   Ahmad Fatoum
  • [PATCH 3/6] video: backlight-pwm: make power-supply and enable-gpio optional   Johannes Schneider
    • [PATCH 3/6] video: backlight-pwm: make power-supply and enable-gpio optional   Ahmad Fatoum
  • [PATCH 4/6] video: add i.MX8MP LCDIF2 V8 framebuffer driver   Johannes Schneider
    • [PATCH 4/6] video: add i.MX8MP LCDIF2 V8 framebuffer driver   Ahmad Fatoum
      • [PATCH 4/6] video: add i.MX8MP LCDIF2 V8 framebuffer driver   SCHNEIDER Johannes
  • [PATCH 5/6] video: add generic panel-lvds driver   Johannes Schneider
    • [PATCH 5/6] video: add generic panel-lvds driver   Ahmad Fatoum
  • [PATCH 6/6] video: imx-lcdif: drain write-combine buffer before LCDIF DMA reads pixels   Johannes Schneider
    • [PATCH 6/6] video: imx-lcdif: drain write-combine buffer before LCDIF DMA reads pixels   Lucas Stach
      • [PATCH 6/6] video: imx-lcdif: drain write-combine buffer before LCDIF DMA reads pixels   Ahmad Fatoum
      • [PATCH 6/6] video: imx-lcdif: drain write-combine buffer before LCDIF DMA reads pixels   Lucas Stach
      • [PATCH 6/6] video: imx-lcdif: drain write-combine buffer before LCDIF DMA reads pixels   Michael Grzeschik
      • [PATCH 6/6] video: imx-lcdif: drain write-combine buffer before LCDIF DMA reads pixels   Michael Grzeschik
      • [PATCH 6/6] video: imx-lcdif: drain write-combine buffer before LCDIF DMA reads pixels   SCHNEIDER Johannes
• [PATCH] lib: logo: support a single pre-rendered logo file as an alternative to SVG   Johannes Schneider
  • [PATCH] lib: logo: support a single pre-rendered logo file as an alternative to SVG   Ahmad Fatoum
    • [PATCH] lib: logo: support a single pre-rendered logo file as an alternative to SVG   SCHNEIDER Johannes
• [PATCH v2 0/3] USB: dwc2: Fix handling NAK   Sascha Hauer
  • [PATCH v2 0/3] USB: dwc2: Fix handling NAK   Sascha Hauer
• [PATCH v2 1/3] usb: dwc2: Do not print error messages when URBs are nacked   Sascha Hauer
• [PATCH v2 2/3] usb: dwc2: handle NAK when CHHLTD does not fire   Sascha Hauer
• [PATCH v2 3/3] usb: dwc2: fix data toggle reset direction on ClearFeature(ENDPOINT_HALT)   Sascha Hauer
• [PATCH 0/4] ARM: i.MX6UL: initialize snvs peripheral   Stefan Kerkmann
  • [PATCH 0/4] ARM: i.MX6UL: initialize snvs peripheral   Sascha Hauer
• [PATCH 1/4] nvmem: snvs_lpgpr: remove unnecessary cfg->name assignment   Stefan Kerkmann
  • [PATCH 1/4] nvmem: snvs_lpgpr: remove unnecessary cfg->name assignment   Ahmad Fatoum
• [PATCH 2/4] ARM: i.MX8M/i.MX7: initialize SNVS glitch detection for all families   Stefan Kerkmann
• [PATCH 3/4] ARM: i.MX7: snvs: rename imx7_snvs_init -> imx7_setup_snvs   Stefan Kerkmann
• [PATCH 4/4] ARM: i.MX6UL: initialize SNVS   Stefan Kerkmann
• [PATCH v2] lib: gui: png_pico: fix use-after-free and double-free in png_open   Johannes Schneider
  • [PATCH v2] lib: gui: png_pico: fix use-after-free and double-free in png_open   Sascha Hauer
• [PATCH v3 1/2] Add support for extlinux.conf   Sascha Hauer
  • [PATCH v3 1/2] Add support for extlinux.conf   Alexander Shiyan
    • [PATCH v3 1/2] Add support for extlinux.conf   Sascha Hauer
• [PATCH v2 00/11] video: enable boot splash on i.MX8MP with LVDS panel   Johannes Schneider
  • [PATCH v2 01/11] clk: imx8mp: add 700 MHz rate entry for VIDEO_PLL1   Johannes Schneider
  • [PATCH v2 02/11] clk: imx8mp: add 1039.5 MHz and 519.75 MHz rate entries for VIDEO_PLL1   Johannes Schneider
  • [PATCH v2 03/11] pmdomain: imx8mp-blk-ctrl: add media blk-ctrl power domain support   Johannes Schneider
  • [PATCH v2 04/11] video: backlight-pwm: make power-supply and enable-gpio optional   Johannes Schneider
  • [PATCH v2 05/11] video: lcdif: make functional on i.MX8MP   Johannes Schneider
  • [PATCH v2 06/11] video: lcdif: use 128B AXI bursts to avoid right-edge gap   Johannes Schneider
  • [PATCH v2 07/11] video: lcdif: default to RGB888_1X24 on VPL_GET_BUS_FORMAT failure   Johannes Schneider
  • [PATCH v2 08/11] video: lcdif: register simplefb fixup and enable framebuffer at probe   Johannes Schneider
    • [PATCH v2 08/11] video: lcdif: register simplefb fixup and enable framebuffer at probe   Sascha Hauer
  • [PATCH v2 09/11] video: lcdif: drain write-combine framebuffer in fb_damage   Johannes Schneider
  • [PATCH v2 10/11] video: simple-panel: support panel-lvds DT bindings   Johannes Schneider
  • [PATCH v2 11/11] video: simple-panel: lazily resolve backlight without failing   Johannes Schneider
  • (subset) [PATCH v2 00/11] video: enable boot splash on i.MX8MP with LVDS panel   Sascha Hauer
• [PATCH 0/5] arm: socfpga: agilex5: cleanup SDRAM initialization   Michael Tretter
  • [PATCH 1/5] arm: socfpga: agilex5: separate EL3 init function   Michael Tretter
  • [PATCH 2/5] arm: socfpga: agilex5: panic if DDR init failed   Michael Tretter
  • [PATCH 3/5] arm: socfpga: iossm: add delay to wait for firmware   Michael Tretter
  • [PATCH 4/5] arm: socfpga: agilex5: drop dual port hack   Michael Tretter
  • [PATCH 5/5] arm: socfpga: agilex5: drop bank select before ddr_init   Michael Tretter
  • [PATCH 0/5] arm: socfpga: agilex5: cleanup SDRAM initialization   Sascha Hauer
• [PATCH v4 1/2] Add support for extlinux.conf   Alexander Shiyan
  • [PATCH v4 2/2] Documentation: add extlinux.conf support description   Alexander Shiyan
  • [PATCH v4 1/2] Add support for extlinux.conf   Sascha Hauer
• [PATCH 0/3] arm: socfpga: cleanup UART for serial console   Michael Tretter
  • [PATCH 1/3] arm: socfpga: replace custom UART with ns16550   Michael Tretter
  • [PATCH 3/3] arm: socfpga: axe5-eagle: always use UART0   Michael Tretter
  • [PATCH 0/3] arm: socfpga: cleanup UART for serial console   Sascha Hauer
• [PATCH 2/3] arm: socfpga: get rid of UART address for low-level debug   Michael Tretter
• [PATCH v2 0/4] clk: socfpga: agilex5: sync with kernel   Michael Tretter
  • [PATCH v2 1/4] clk: socfpga: sync arria10 clock initialization with kernel   Michael Tretter
  • [PATCH v2 2/4] clk: socfpga: remove clk-phase setting   Michael Tretter
  • [PATCH v2 3/4] clk: socfpga: sync clock structs with kernel   Michael Tretter
  • [PATCH v2 4/4] clk: socfpga: agilex5: sync with kernel   Michael Tretter
  • [PATCH v2 0/4] clk: socfpga: agilex5: sync with kernel   Sascha Hauer
• [PATCH] pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL   Ahmad Fatoum
  • [PATCH] pinctrl: generic: rename PIN_CONFIG_OUTPUT to LEVEL   Sascha Hauer
• v2026.06.0   Sascha Hauer
• iMX ddrphy_utils difference with U-boot   Andrei Lalaev
  • iMX ddrphy_utils difference with U-boot   Ahmad Fatoum
    • iMX ddrphy_utils difference with U-boot   Andrei Lalaev
      • iMX ddrphy_utils difference with U-boot   Ahmad Fatoum
    • iMX ddrphy_utils difference with U-boot   Sascha Hauer
  • iMX ddrphy_utils difference with U-boot   Ahmad Fatoum
    • iMX ddrphy_utils difference with U-boot   Ahmad Fatoum
• [PATCH] ARM: rockchip: tfa: pass NULL fdt when there is none   Sascha Hauer
  • [PATCH] ARM: rockchip: tfa: pass NULL fdt when there is none   Michael Tretter
  • [PATCH] ARM: rockchip: tfa: pass NULL fdt when there is none   Sascha Hauer
• [PATCH RFT] ARM: lib32: bootm: support booting EFI-stubbed kernels without EFI   Ahmad Fatoum
  • [PATCH RFT] ARM: lib32: bootm: support booting EFI-stubbed kernels without EFI   Fabian Pflug
  • [PATCH RFT] ARM: lib32: bootm: support booting EFI-stubbed kernels without EFI   Sascha Hauer
• [PATCH RFT] defaultenv: boot/devboot: add a devboot boot target   Ahmad Fatoum
  • [PATCH RFT] defaultenv: boot/devboot: add a devboot boot target   Sascha Hauer
• [PATCH] Documentation: user: devboot: fix kernel target   Michael Tretter
  • [PATCH] Documentation: user: devboot: fix kernel target   Sascha Hauer
• [PATCH] fixup! kbuild: sync with Linux v6.17   Ahmad Fatoum
  • [PATCH] fixup! kbuild: sync with Linux v6.17   Ahmad Fatoum
• [PATCH 1/3] ARM: deprecate use of ARCH=arm for arm64 builds   Ahmad Fatoum
  • [PATCH 2/3] Makefile: clang: fix triplet computation for ARM   Ahmad Fatoum
  • [PATCH 1/3] ARM: deprecate use of ARCH=arm for arm64 builds   Sascha Hauer
• [PATCH 3/3] ARM64: suppress -mabi=lp64 when built with clang   Ahmad Fatoum
• [PATCH 1/2] ARM: nxp-imx93-frdm: use tabs instead of spaces   Bastian Krause
  • [PATCH 2/2] ARM: nxp-imx93-frdm: add bbu handler for eMMC   Bastian Krause
    • [PATCH 2/2] ARM: nxp-imx93-frdm: add bbu handler for eMMC   Marco Felsch
  • [PATCH 1/2] ARM: nxp-imx93-frdm: use tabs instead of spaces   Marco Felsch
  • [PATCH 1/2] ARM: nxp-imx93-frdm: use tabs instead of spaces   Sascha Hauer
• [PATCH v2 0/2] ARM: i.MX: riotboard: Add OP-TEE integration   Sascha Hauer
• [PATCH 1/6] mfd: rn5t568: rename to rn5t618   Lucas Stach
  • [PATCH 5/6] watchdog: RN568: rename to rn5t618   Lucas Stach
  • [PATCH 1/6] mfd: rn5t568: rename to rn5t618   Sascha Hauer
• [PATCH 2/6] mfd: rn5t618: use defined compatibles   Lucas Stach
• [PATCH 3/6] mfd: rn5t618: demote probe message to debug level   Lucas Stach
• [PATCH 4/6] mfd: rn5t618: wait a bit after triggering restart   Lucas Stach
• [PATCH 6/6] rn5t618: mfd/watchdog: switch to mfd device population   Lucas Stach
• [PATCH 1/3] efi: loader: fix format string for ARM32   Ahmad Fatoum
  • [PATCH 2/3] ARM: stm32mp: lxa: change stdout-path baud rate from 9600 to 115200   Ahmad Fatoum
    • (subset) [PATCH 2/3] ARM: stm32mp: lxa: change stdout-path baud rate from 9600 to 115200   Sascha Hauer
• [PATCH 3/3] ARM: stm32mp: enable useful options for the LXA Fairy Tux2   Ahmad Fatoum
  • [PATCH] fixup! ARM: stm32mp: enable useful options for the LXA Fairy Tux2   Ahmad Fatoum
• [PATCH master 1/2] efi: loader: release bootm OS staging buffer   Ahmad Fatoum
  • [PATCH master 2/2] efi: loader: bump memory map key on FreePages   Ahmad Fatoum
  • [PATCH master 1/2] efi: loader: release bootm OS staging buffer   Sascha Hauer
• [PATCH v1 01/10] ARM: introduce ARCH_MICROCHIP for ARM64 Microchip SoCs   Oleksij Rempel
  • [PATCH v1 03/10] clk: add Microchip LAN966X / LAN969X generic clock controller driver   Oleksij Rempel
    • [PATCH v1 03/10] clk: add Microchip LAN966X / LAN969X generic clock controller driver   Marco Felsch
      • [PATCH v1 03/10] clk: add Microchip LAN966X / LAN969X generic clock controller driver   Sascha Hauer
    • [PATCH v1 03/10] clk: add Microchip LAN966X / LAN969X generic clock controller driver   Sascha Hauer
  • [PATCH v1 04/10] clk: tolerate clocks registered without a name   Oleksij Rempel
  • [PATCH v1 05/10] pinctrl: ocelot: port Microsemi/Microchip Ocelot pinctrl from Linux   Oleksij Rempel
  • [PATCH v1 06/10] mci: atmel-sdhci: add Microchip LAN9691 / LAN969X SDHCI support   Oleksij Rempel
    • [PATCH v1 06/10] mci: atmel-sdhci: add Microchip LAN9691 / LAN969X SDHCI support   Marco Felsch
    • [PATCH v1 06/10] mci: atmel-sdhci: add Microchip LAN9691 / LAN969X SDHCI support   Sascha Hauer
  • [PATCH v1 07/10] gpio: add Microchip SGPIO (serial GPIO) driver   Oleksij Rempel
    • [PATCH v1 07/10] gpio: add Microchip SGPIO (serial GPIO) driver   Sascha Hauer
  • [PATCH v1 08/10] reset: add Microchip sparx5 / LAN969X / LAN966X switch reset driver   Oleksij Rempel
  • [PATCH v1 09/10] spi: atmel-quadspi: add Microchip LAN966X / LAN969X support   Oleksij Rempel
  • [PATCH v1 10/10] ARM: add Microchip LAN9696 (LAN969X) SoC and EV23X71A board   Oleksij Rempel
• [PATCH v1 02/10] serial: atmel: add lan9696 (Microchip LAN969X) support   Oleksij Rempel
  • [PATCH v1 02/10] serial: atmel: add lan9696 (Microchip LAN969X) support   Marco Felsch
• [PATCH] ARM: dts: i.MX8MP FRDM: remove memory node   Bastian Krause
  • [PATCH] ARM: dts: i.MX8MP FRDM: remove memory node   Marco Felsch
  • [PATCH] ARM: dts: i.MX8MP FRDM: remove memory node   Ahmad Fatoum
    • [PATCH] ARM: dts: i.MX8MP FRDM: remove memory node   Sascha Hauer
    • [PATCH] ARM: dts: i.MX8MP FRDM: remove memory node   Sascha Hauer
  • [PATCH] ARM: dts: i.MX8MP FRDM: remove memory node   Sascha Hauer
• [PATCH] lib: decompress_unlz4: drop redundant -4 in wrapper call to unlz4   Johannes Schneider
  • [PATCH] lib: decompress_unlz4: drop redundant -4 in wrapper call to unlz4   SCHNEIDER Johannes
    • [PATCH] lib: decompress_unlz4: drop redundant -4 in wrapper call to unlz4   Ahmad Fatoum
• [PATCH v1] firmware: choose PBL fw-external verify algorithm via Kconfig   Johannes Schneider
  • [PATCH v1] firmware: choose PBL fw-external verify algorithm via Kconfig   Ahmad Fatoum
    • [PATCH v1] firmware: choose PBL fw-external verify algorithm via Kconfig   SCHNEIDER Johannes
      • [PATCH v1] firmware: choose PBL fw-external verify algorithm via Kconfig   Ahmad Fatoum
      • [PATCH v1] firmware: choose PBL fw-external verify algorithm via Kconfig   SCHNEIDER Johannes
• [PATCH 2/2] arch: arm: imx: detect secondary boot   Fabian Pfitzner
  • [PATCH 2/2] arch: arm: imx: detect secondary boot   Sascha Hauer
• [PATCH master] efi: loader: avoid NULL image file paths   Ahmad Fatoum
  • [PATCH master] efi: loader: avoid NULL image file paths   Sascha Hauer
• [PATCH] ARM: i.MX8M: enable MMU in PBL around fw-external BL32 verify   Johannes Schneider
  • [PATCH] crypto: sha256: PBL multi-block transform via ARMv8 Crypto Extensions Crypto Extensions   Johannes Schneider
• [PATCH] ARM: Layerscape: Fix typo im documentation   Thorsten Scherer
  • [PATCH] ARM: Layerscape: Fix typo im documentation   Ahmad Fatoum
  • [PATCH] ARM: Layerscape: Fix typo im documentation   Sascha Hauer
• [PATCH v1 1/2] commands: mmc: add mmc-utils compatible enh_area set subcommand   Johannes Schneider
  • [PATCH v1 2/2] commands: mmc_extcsd: fix enhanced-area / GPP size display arithmetic   Johannes Schneider
    • [PATCH v1 2/2] commands: mmc_extcsd: fix enhanced-area / GPP size display arithmetic   Ahmad Fatoum
    • (subset) [PATCH v1 2/2] commands: mmc_extcsd: fix enhanced-area / GPP size display arithmetic   Sascha Hauer
  • (subset) [PATCH v1 1/2] commands: mmc: add mmc-utils compatible enh_area set subcommand   Sascha Hauer
• [PATCH] mci: imx-esdhc-pbl: clear stale INT_STATUS before first PBL transfer   Johannes Schneider
  • [PATCH] mci: imx-esdhc-pbl: clear stale INT_STATUS before first PBL transfer   Sascha Hauer
• [PATCH master] ARM: rockchip: hide CONFIG_ARCH_ROCKCHIP_ATF_FDT_SIZE behind ATF_PASS_FDT   Ahmad Fatoum
  • [PATCH master] ARM: rockchip: hide CONFIG_ARCH_ROCKCHIP_ATF_FDT_SIZE behind ATF_PASS_FDT   Sascha Hauer
• v2026.06.1   Sascha Hauer
• [PATCH master] Documentation: migration-guides: add .0 to migration-2026.06   Ahmad Fatoum
  • [PATCH master] Documentation: migration-guides: add .0 to migration-2026.06   Sascha Hauer
• [RFC] mci: imx-esdhc-pbl: enable ADMA2 for i.MX8M BL33 loads -- help needed: ADMA stalls in ST_TFR despite every visible register matching the Linux runtime driver   Johannes Schneider
  • [RFC] mci: imx-esdhc-pbl: enable ADMA2 for i.MX8M BL33 loads -- help needed: ADMA stalls in ST_TFR despite every visible register matching the Linux runtime driver   Sascha Hauer
  • [RFC] mci: imx-esdhc-pbl: enable ADMA2 for i.MX8M BL33 loads -- help needed: ADMA stalls in ST_TFR despite every visible register matching the Linux runtime driver   Ahmad Fatoum
• [PATCH 212/212] dma: make dma_mapping_error NULL-device safe   Johannes Schneider
• [PATCH] ARM: mmu: panic when calling flush_cacheable_pages with zero size   Ahmad Fatoum
• [PATCH v2] ARM: mmu: skip cacheable page flushes for empty ranges   Ahmad Fatoum
  • [PATCH v2] ARM: mmu: skip cacheable page flushes for empty ranges   Sascha Hauer
• [PATCH] restart: fix restart handler by name selection   Marco Felsch

Last message date: Mon Jun 22 10:21:19 PDT 2026
Archived on: Mon Jun 22 10:21:31 PDT 2026

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...