[PATCH v1 02/10] serial: atmel: add lan9696 (Microchip LAN969X) support

[Oleksij Rempel]

Allow building the Atmel USART driver on Microchip LAN969X (ARCH_MICROCHIP)
in addition to ARCH_AT91, and match the new "microchip,lan9691-usart"
compatible alongside the existing AT91 variants.

Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
---
 drivers/serial/Kconfig | 10 +++++++---
 drivers/serial/atmel.c |  3 ++-
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6ac1d94526c2..15cbdafcffcc 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -90,9 +90,13 @@ config DRIVER_SERIAL_NS16550_OMAP_TTYS
 	  used.
 
 config DRIVER_SERIAL_ATMEL
-	depends on ARCH_AT91
-	default y
-	bool "Atmel serial driver"
+	bool "Atmel USART support"
+	depends on ARCH_AT91 || ARCH_MICROCHIP
+	default y if ARCH_AT91
+	help
+	  This enables the driver for the on-chip UARTs of Atmel/Microchip
+	  AT91, SAMA5, and LAN969X SoC families. The driver supports device
+	  tree configuration and clock framework integration.
 
 config DRIVER_SERIAL_NS16550_PCI
 	depends on DRIVER_SERIAL_NS16550
diff --git a/drivers/serial/atmel.c b/drivers/serial/atmel.c
index 2dcb458fbd30..13747ef8201b 100644
--- a/drivers/serial/atmel.c
+++ b/drivers/serial/atmel.c
@@ -442,8 +442,9 @@ static int atmel_serial_probe(struct device *dev)
 }
 
 static const struct of_device_id __maybe_unused atmel_serial_dt_ids[] = {
-	{ .compatible = "atmel,at91rm9200-usart" },
+	{ .compatible = "microchip,lan9691-usart" },
 	{ .compatible = "atmel,at91sam9260-usart" },
+	{ .compatible = "atmel,at91rm9200-usart" },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, atmel_serial_dt_ids);
-- 
2.47.3