iMX ddrphy_utils difference with U-boot

[Ahmad Fatoum]

Hello Andrei,

On 6/8/26 16:24, Andrei Lalaev wrote:
> Hi,
> 
> I am moving an iMX8MP module from vendor U-Boot 2024.04 to Barebox 2025.02

Sidenote: You'll probably want to use one of the still supported
v2026.04 or v2026.06 releases.

> and found a strange difference in the DDR training code:
> 
>   vim drivers/ddr/imx/ddrphy_utils.c +94
> 
> And the corresponding line in U-Boot:
> 
>   vim drivers/ddr/imx/phy/ddrphy_utils.c +101
> 
> Is there any chance that somebody knows/remembers why "return -1" was replaced with "hang()"?

I can't speak for Sascha, but having looked at the code, I see no reason
why not to propagate the error.

> I couldn't find any explanation in the commits/mailing lists.

My guess is that it wasn't anticipated that boards would handle
the error gracefully to fall back to a different DDR init.

Cheers,
Ahmad

> 
> Thanks a lot!
> 
> --
> Best regards,
> Andrei Lalaev
> 
> 
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |